If you look around your home, there are numerous areas that can be worked on to help you save money and energy. From your tv, to your laptop, to even your sink, it's all around you. You can even find it in your basement. Those water pipes that are exposed underground, are perfect areas of where you can easily save money.
Plumbing is best left to plumbers. The results of DIY plumbing are almost always disastrous. However, with the help of this video, you can do a little self-plumbing by diagnosing the cause of your noisy pipes. The video also explains, in general terms, how to fix each type of noisy pipe.
Watch this video to learn how to cap off a water pipe with a push fit fitting within seconds. Useful for when you absolutely have to cut a pipe.
Install the pipe fittings of the hot water heater.
A frozen pipe doesn’t have to mean major trouble. You can keep your water flowing all winter long. You Will Need
About a quarter of a million homes sustain damage from broken pipes every winter. Here's how to avoid a similar fate. Watch this video to learn how to prevent pipes from freezing.
First of all the tutor advises that this is a good idea to do it regularly. It is advisable to drain it out otherwise it shall stop the boiler from working. Before starting your work you have to switch off your boiler. Now allow the water to cool down because it is very hot. First find out the radiator and the drain valve attached to it. Now take a hose pipe which is long enough to drain the water from the radiator to your backyard. Slide the pipe over the inlet and then secure it the link. S...
In this video, we learn how to install a vanity and sink with Lowe's. A great way to give your bathroom a makeover is to give it a new vanity and sink. First, turn off the water from the water line, then take down the pipes from under the sink. Use a bucket to catch extra water that's falling out. Next, separate the top from the base and then remove the old vanity. Remove the old base unit from the bathroom and then install the new vanity. Measure out the area to make sure it will fit. Place ...
This video explains to the viewer the advantages of replacing washing machine hoses. As well as, rather more importantly, explaining how to complete the process. According to the creator the rubber hoses that are standard to most washing machines are subjected to high pressure water for many years. As they are only made of rubber they are apt to break and start leaking. This can cause many thousands of dollars worth of water damage. The creator recommends replacing the rubber pipes with reinf...
To solder copper pipes, start by using a sharp blade and scrape the end of the pipe you are going to solder. This will get all the burrs off of the pipe. Next, take some steel wool and clean the pipe so that it is nice and clean and shiny. The next step is to apply some flux. Use a rag to apply the flux to the end of the pipe. You want to make sure that the flux goes all the way around the pipe. After putting flux on the two pieces of pipe, put them together using the fitting. Take the blowto...
These are simple instructions on how to construct a PVC didgeridoo. You must work in a well ventilated area as you are dealing with heat and PVC fumes. You need a heat gun, pipe clamp, screwdriver, pipe cutter, dremel, PVC pipe, buffing bit and bucket of water. This is a detailed process of digeridoo making.
This is an instructional video to help demonstrate how to sweat solder copper water tubing in plumbing repair. If you can't be bothered to hire a professional plumber for all plumbing repairs, this video guide shows you how to do the work yourself. You will need a gas or propane torch, copper or brass fittings, copper tubing, gloves, solder paste, solder, pipe cleaner, and a pipe cutter. Learn how to sweat solder copper water tubing for plumbing repair.
This video illustrate us how to build a drip irrigation system. Here are the following steps: 1. To build a drip irrigation system you need a pipe, hydro cyclone, screen filter, Pressure building pump and micro filter.step 2: Connect the pipe to the water source and let it pass through the hydro cyclone to settle down all the sand. 3: Now from the hydro cyclone pass it through the pressure gauge for building up the pressure ant then this pipe passes through the network of horizontal and verti...
This video shows you how to make your very own water filter. 1. 20mm PVC pipe for upper section larger debris.
Stephanie and Julie teach us how to unclog a toilet the correct way in this video. First, remember to turn the valve off on your water that goes to your toilet. This will help prevent unwanted floods in your bathroom. You will also need a plunger, making sure to take the lip out for better suction. After you stick the plunger into the toilet, plunge rapidly around twelve times. If this doesn't work, try adding more water and plunging again for around twelve times. If it still doesn't work, yo...
Tim Carter explains why vent pipes are important and how a vent pipe works. These are excellent videos to watch if you need to learn how to prevent clogging in vent piping. If you notice a gurgle when flushing the toilet, it might be an indication that the vent pipe is clogged. Get up on the roof and put a garden hose down the pipe and turn on the water. Be sure to have someone inside checking for any leaks. The water from the hose hopefully will flush out the blockage and your gurgle will di...
Tim Carter shows a clever method that prevents tree roots from entering an underground sewer or septic line. Check for underground utilities before attempting this project.
Real rockets require top ingenuity from physics and engineering experts, but you can construct a smaller replica that costs almost nothing can can be made from materials you already have at home or can find at a hardware store.
This video tutorial is in the Home & Garden category which will show you how to save money & water with your toilet flush. The first step is to turn the water off. Then remove the lid of the tank, disconnect the bowl refill supply and make sure that the overflow pipe is open. The next step is to take the new sink, attach it to the water supply point, place the drain in the overflow pipe and position the sink over the flush tank. The modification is done. Now turn on the water supply and your ...
If your replacement faucet is not the right size, pick up a connector and fitting from the hardware store. You will also need wrenches. First turn off the water supply. Then, brace the pipe with a pipe wrench. Use another wrench as a lever and remove the faucet. Take a piece of plumber's tape and wrap the brass connector. Make sure you thread the tape in the same direction that you screw on the connector. Screw the connector on by hand and tighten it with a wrench. Use the other wrench to kee...
In this video, we learn how to build your own stomp rocket out of household materials. Materials you will need are: plastic bottles, bicycle inner tube, 2 feet PVC pipe, duct tape, masking tape, and file folders or card stock. Now, take your PVC pipe and roll paper around it and tape it. Then, remove the paper from the pipe and tape it more so it's completely closed. Then, make your nose cone for the rocket. Place this and the wings onto the rocket in your choice of colors. Then, make the lau...
Teflon tape or pipe dope can be used to create a seal on black iron pipe. Tim Carter of AsktheBuilder.com demonstrates how to do the job right and shares some helpful tips. This black iron pipe is used to transport natural gas to your furnace, water heater and stove. This pipe has threaded fittings at the connection point which need to be sealed with pipe dope or Teflon tape. Teflon tape should be wrapped onto the male end of the pipe in a clockwise direction. Pipe dope has the consistency of...
Soldering copper pipes is an important skill for many home improvement projects. Tim Carter of AsktheBuilder.com shows you how to solder copper pipes to get a water tight seal.
In this video, we learn how to create a marbleized water look with icing. This is a colorful and eye catching way to put icing on a cake to make a memorable piece! First, spoon your icing into a small bowl and then make a rice cereal treat and shape it into a circle. To start to decorate this, you will pipe on green icing to the sides and front of the ball to make it look like a fish. Then, pipe some of the icing onto a flat surface with red confectioner's sugar. Once this is covered and hard...
Sometimes your old shower head just doesn't cut it anymore. Don't fret, installing a new one is a simple task.
In this tutorial, we learn how to get rid of that smell coming from your shower with Bob Schmidt. First, you will want to clean out your drain pipes to make sure the smell is not coming from there. If the smell is coming back out, you will need to do additional work. If water gets saturated into the base of the shower, then there should be some gravel around it so the water can soak through and go down into the drain pipe. If moisture soaks through the tile grout, then it can bring out the se...
Installing a sprinkler system in your yard is a great way to spread water to all your plants and yard. All you need to do is turn a switch or knob and instant water. So if you're planning on installing a sprinkler system in your yard, it's important to know what each item can do.
Whether it's broken or just plain ugly, your old faucet can be replaced with a shiny new one in a flash. Learn how to replace a faucet without calling the handyman or the plumber.
What’s better in the summer than playing around in the water? Lounging in the pool, water balloon fights, and playing in the sprinklers helps us forget how much it sucks to be outside in 100+ degree weather.
Check out this landscaping video tutorial to see how to install a drip irrigation watering system. You'll need this if you want to keep your garden looking great. You will have to poke a hole in the pipe for every shrub. Then, you'll need to install a coupler. This drip irrigation installation is explained in simple English by Sprinkler Daddy's Sean Stefan.
Having a backup sump pump is integral in making sure your basement is always protected from water, and if you have the Basement Watchdog battery backup sump pump system, this video will show you the complete installation procedure. Find out how to build a pipe connection to the discharge pipe, install check valves, connect to the backup system and more.
Learn how to make a bike repair stand with this video! Create the legs: 1. Two sets of 8 and 10 inch piece of steel pipe, a 90 degree angle, an end cap and a T pipe are the starting materials. About 0.5 inch diameter pipe is fine for the project.
Making and sewing piping can be an easy and fun sewing project. Get tips from our expert on fabric piping in this free sewing video series.
Watch this lampworking video series to learn how to make a glass blue tubing enclamo pipe. This style of pipe is nice because of the way it lays down - it doesn't look like a typical pipe.
This simple how-to from Buildpedia shows every DIYer how to "sweat pipe", meaning, how to solder it together. This is a simple technique that's easy to get the hang of. You'll need a solder kit, the pipes want to solder, an aceteline torch and a few other things.
Costume parties are in full effect this weekend, so with that said, how cool would this look at your Halloween party? Instructables user castor009 made two holes in the head (one for inserting the PVC tube, the other where the liquid will spew out) and insert the pipe and tubing, then stuffed it to secure everything. He then fit the bottom tubing through a pencil holder and attached it to a water pump. Then just add whatever you want to serve at the party (I would suggest anything red or blac...
If you live somewhere where winter storms and blizzards are a threat, watch this video. It will give you several great tips for riding out a winter storm or blizzard safely inside your house. These include running water continuously so your pipes don't freeze and wearing layers of clothing to adjust to changing temperatures.
Here's a quick and easy way to add some Christmas flair to your home this holiday season. These mini wreaths will be a huge hit.
Has your child been in love with fish since "Finding Nemo?" Learn how to make pipe cleaner fish from a professional art instructor in this free crafts video series.
Everything you ever wanted to know about making arts and crafts projects with pipe cleaners in this free arts and crafts video series for kids taught by and expert.
