In this video we learn how to wrap handlebars. First, open up the tape and remove the adhesive. Place the tape on the bar and then tuck in one half as you work your way up the bar. The adhesive should be on the bars and there should be tension on them so they lay flat. Once you finish wrapping this, make sure they are tight and secure. Check your work to make sure you didn't leave any gaps and the curve is smooth. Don't pull too hard if you are working with cork tape, this will cause damage t...
This motorcycle video guide will show you how to remove the handlebars of a Kawasaki KLR650. If you are replacing or repairing your KLR 650 handlebars, watch this video and see how to do it yourself.
Is your old motorcycle's handlebar looking sadder than Mischa Barton's acting career? Then perhaps it is time to get them replaced. But don't waste your time and money on getting them fixed at a car shop.
Being able to rid a bike without holding on to the handlebars allows you to do all sorts of useful things while on your bike and makes your look like a pro. Watch this video to learn how to do it easily and open up your biking life.
Wrapping your bike's handlebars with bar tape might not sound like a complicated enterprise but it's much trickier than you might expect. Fortunately, this video presents a complete overview of the bar-wrapping process and will help you to a achieve a finished, even wrap every time. For more information, including step-by-step instructions, watch this free cyclist's guide.
In this video our musician friend is trying to teach the viewers how to play "Handlebars" by Flo bots on the violin . This proves to be quite a special lesson because it consist in using your finger from your right hand to pinch the chords of the instrument . He is showing us the best technique to use and the correct notes to sing this difficult song . After following the instruction of this step by step video , you will have a whole new vision regarding this rare way of playing the violin . ...
Take a look at this instructional video and learn how to wrap your bicycle handlebars. The direction you take in rolling the tape is extremely important. You'll want to start on the bottom of the drop, work your way up around the brake shift lever, and all the way to the top. By going through bottom to top, you'll get a smooth transition as your hand slides down the bars. If you roll it in the opposite direction, your hand sliding down the bar will unravel the tape and wear it out prematurely.
If you're interested in wrapping your bicycle's handlebars with tape, you'll need to check out this tutorial. If you think that wrapping it with just electrical tape is all you need to do, you'll find out that you're wrong.
There are lots of methods of wrapping bar-tape. This is the top down method and requires no electrician's tape to fasten the end of the tape to the bicycle handlebars. Tke a look at this tutorial and learn how to attach it by the top down method.
Check out this video to learn how to make a gt snow racer with BMX handlebars.
Retaping the handlebars on your bike is easy, cheap, and can have a dramatic effect on the look of your bike. I show you how to do it.
Looking for a way to make your bike stand out? You could light it up with LED rim lights or turn signals. Or if you're looking for something a little less flashy, you could make your own set of custom wooden handlebars like these by furniture designer David Moore. To actually make these wooden handlebars, you will need some woodworking tools, not to mention some actual woodworking skill, or at least the tools and some knowledge on bending and forming wood. In his video below, David shows exac...
If you ride your bike at night frequently, you've probably had at least one close call with a car, pedestrian, or some other moving obstacle because of reduced visibility. Not only is it dangerous to ride at night without lights, it's illegal in a lot of places. Make sure no one can miss you with these DIY handlebar lights from Becky Stern at Adafruit. What You'll Need
With a few easy steps you can remove the handlebars from your bike to change the grips, for maintenance or for whatever other reason you might want handlebars off of a bike. Now you'll never have to suffer though old handlebar grips again.
Leon Bell can really be a pain in the butt! And it always seems like he has an unfair advantage against you, although the chainsaws tied to the sides of his motorcycle handlebars might be a part of that complaint. If you're having trouble kicking the snot out of this guy, or are looking for an easier tactic for taking him down, you can take the psychopath out with help from Achievement Hunter.
BMX: Catch Some Air If Ernest Michaux, inventor of the modern bicycle, could see what people are doing with his creation, he'd freak out. The art of creative biking has never been more challenging and rewarding than it is now. Check out the tricks for a guide to BMX mayhem. Watch this video tutorial to see how to perform a barhop on a BMX bicycle.
BMX: Catch Some Air If Ernest Michaux, inventor of the modern bicycle, could see what people are doing with his creation, he'd freak out. The art of creative biking has never been more challenging and rewarding than it is now. Check out the tricks for a guide to BMX mayhem. Watch this video tutorial to see how to perform a bunny hop on a BMX bicycle.
Jessi Stensland, professional triathlete, explains how selecting the right bike can mean the difference between a comfortable ride and possible neck, back, knee or shoulder pains. Stensland first takes us through finding the right bike size with charts such as those available on Schwinn bikes. After the right size is determined, riders should determine the proper fit by adjusting their bike's handlebars and seat. Lastly, Stensland instructs bike riders on how to choose the proper saddle.
Let's start with the bike: The most important thing on your bike, is your brake system, you will need the brake lever on your handle bars. When performing a wheelie, this will help you control speed and prevent you from falling on your butt. Your rear brake has to function properly or you will face the risk of falling.
In this tutorial, we learn how to counter steer on a 2008 Ninja 250 motorcycle. Vehicles will counter steer after you get to 12 mph and is where the car steers with the direction you push the bars in. You will push in the handlebars to go different ways, to go left press the left handle bar and to go right you push the right handle bar. Make sure you don't do this while you're on the right hand side or you will run into the sidewalk. If you push both at the same time your bike will shake. Thi...
This motorcycle parts video shows you how to change the grips on a Honda 919 or Hornet 900 bike. Learn how to take the grips and bar weights off the handlebars and replace them with new ones.
In this video, we learn how to countersteer and turn on a motorcycle. First, you will push left and lean left while you are on the motorcycle. Push on the hand grip while you are leaning your body. Turn at a normal speed, not while you are going really fast, or you can fall off. You will turn the handlebars just like a steering wheel on a car going at a slow speed. This should be between 8 and 15 miles per hour, so you will have to countersteer. Practice this on a closed course and then you c...
In this tutorial, we learn how to make a quick stop on a motorcycle. You must reach a speed of 15 mph first. A quick stop means you stop right when you are in the middle of driving, without slowing down first. Close the throttle first, then pull in the clutch. From here, apply both brakes evenly and firmly without locking them up and keep the handlebars straight. Make sure you ride safe and you do this with a helmet on after you have learned the basics of riding a motorcycle. Once you learn t...
This is a 4 part video on how to fully install your BMX bike. This video shows how to install all parts of a BMX bike; forks, stem, headset, handlebars, seat, cranks, bearings, pedals, wheels, chain, and breaks. Once you've got your BMX bike assembled, you can go out there and start riding!
In some places, it's illegal to ride your bike at night without lights or reflectors, so if you plan on going for a joyride on your street bike, then you need to be prepared to share the road with vehicles and be seen. Appropriate gear and lighting are essential for safety when riding a bike at night.
Frustration is something that comes along with learning to ride a bike. You mustn't give up as it's a valuable skill to have. This video shows you how to ride a bike and minimize frustration.
Watch this video tutorial to learn how to use hand signals on a bicycle. Bicycles don't come with turn signals and brake lights. Fortunately, there's already a universal language for indicating turns and stops on a bike.
There are plenty of ways to make a camera mount for your car, but what if you don't have a car? If you use a bicycle or motorcycle to get around, you can still take smooth videos with this awesome DIY mount for your iPhone (or any other smartphone) by antoinebugleboy.
Riding a bike is a great way to get exercise and as means to getting around but incorrect bike assemble will make for a bad time. Double check all your work and make sure everything is lubed up and fastened before taking your bike out for a spin.
Babies are pretty cool. They do whatever they want, have beautiful women drool all over them, and have more one-on-one boob action than any grown man (or woman) I know.
With gas prices constantly digging into your wallet, biking will always be a cheap and easy alternative for getting around—and it's a perfect way to get in a little exercise. But with the fall season about a week away, it is going to start getting dark a lot earlier and that ride home might be a little more dangerous. So to save yourself an unexpected trip to the ER, take a little time to make your bicycle impossible to overlook.
Riding your bicycle at night is dangerous on busy streets, especially if you've got no bike lights. In most states, it's illegal to ride your bike at night without any lights because drivers on the road won't be able to see you until it's too late. Plus, how is anybody going to notice your sweet ride without a little illumination?
If you bike a lot and live in a small room or apartment, it can be tough to find the space to store your wheels. There are tons of bicycle racks and mounts you can buy, but where's the fun in that when they're so easy to DIY? Here are some of the best inexpensive solutions for your bike storage woes.
Apple AirTags are super helpful for keeping track of your keys, backpack, and other frequently misplaced items, but there are some pretty clever things you can do with them beyond finding your stuff.
In this tutorial, we learn how to disassemble a BMX bike. First, remove the bolts around the handles. Set the handlebars aside, then remove the bottom tired from the front out of its place. Next, set your bearing aside with the bolts. After this, remove the wheel from the part holding it in with a wrench. Next, take out the chain from the bike and remove the back wheel. Remove the rest of the bolts and the spacers from the back of the bike. When finished, you will have all the parts laid out ...
Riding your bike with and incorrect seat height will make it more difficult to peddle and can be hard on your knees. Ensure a more enjoyable bike ride by taking a couple of minutes and making sure your seat is the correct height.
In this downhill racing video series, learn how to prepare for downhill cycling from DH expert Mickey Denoncourt. Mickey will show you how to adjust mountain bikes for downhill racing, how to position handlebars, how to adjust seat height and angle for DH racing, how to adjust the front and rear suspension spring rate for downhill racing, how to adjust the front and rear damper settings on a DH bike, and how to choose protective safety gear for downhill racing.
In this video series, let Mickey Denoncourt show you how to do some simple bicycle repair jobs. He illustrates how to change, handlebars, tires, pedals, and seats. Mickey also gives you tips on how to pick mountain biking shoes. With his advice, you can make a bike that uniquely fits for you. So, what are you waiting for? Start learning about mountain bikes today!
In this video series, our expert will demonstrate how to set up and adjust a cyclocross bike. You will learn expert tips on cyclocross racing while also getting easy to follow instructions how to best adjust your cyclocross bicycle. Our expert will demonstrate how to set up and adjust your cyclocross bike handlebars, seat height and brakes.
