Half Shell Search Results

How To: Grill Oysters on the Half Shell with a Mango Salsa

Looking for great grilling recipe tips? Then watch this how-to video to learn how to grill fresh oysters on the half shell. Top off with a mango, lime, and jalapeno sauce. For added spiciness, top of with red chili horseradish. These grilled oysters on the half shell with mango salsa will be a hit at your next outdoor party.

How To: Crochet a left handed basket

Materials Needed: - Use a Size K Crochet Hook - 2 strands of 4 Ply Yarn Round 1: Start with the Chain 4, then join and wrap. Pull a loop up. Work 12-Full Size Half Double loops through the loop. Then join in the beginning Half Double crochet. Round 2: Start with a chain (1 loop). then work 2-Half Double crochets, in each stitch around for a total of 24-Half Double crochet on round 2. At end of round 2 join in beginning Half Double crochet. Round 3: Start with a chain (1 loop). Do 1-Half Doubl...

How To: Prepare and clean fresh snow crab

Web Chef demonstrates how to prepare and clean snow crab. First, fill a large pot halfway full of water, add a dash of sea salt and bring it to a boil. Throw in the crabs, replace the lid and cook them for 15 minutes. Remove the crabs from the pot and run them under cold water. Pull out the crab's apron and break half the body from the shell. Grab the legs and pry it out from its shell. Break out the mouth and the lungs. Rinse the crab under cold water. Pry the body away from the other half o...

How To: Separate eggs with egg shells

In this how to video Chef Paul explains how to separate egg yolks and whites. Watch and learn how simple it is to do by using the egg shell itself. Crack the egg shell in half and roll the egg between them to allow the white to drip on a plate.

How To: Rip a Penny in Half

No, we're not lying. But before you try and tear a plain old penny in half, you should probably watch this video first or you may hurt your fingers. While ordinary pennies are very, very difficult to rip, if you get rid of the zinc core you are left with only the thin copper shell, which is itself very easy to tear apart.

How To: Make chicken quesadillas

In this tutorial, we learn how to make chicken quesadillas with Skinny and Mini. First, cook your chicken and cut it up into pieces. Then, chop up your other ingredients, including: cheese, onions, tomatoes, and chilies. Now, place your tortilla shell on the bottom of the pan and turn the heat up. Now, flip the shell over on the other side and add in your cheese, chicken, and other ingredients. Sprinkle all of this on just one side of the shell. Once all the ingredients are inside, fold the o...

How To: Crochet a wavy shell stitch pattern

This wavy shell crochet pattern uses three colors to make the design look complex and random. Actually it's quite simple. There are only two rows in this wavy shell crochet pattern. One row alternates between a few standard stitches and half pinwheel shape. The second row is completely plain. Try out this crochet project to achieve satisfying results.

How To: Devein and brine shrimp with Simply Ming

Ming Tsai with Simply Ming explains some shrimp basics. When you prep shrimp, you have to de-vein it, and you have to take the shell off. First cut off the head. Take a knife and slice sideways through the shell. Take out the vein, then get 3 bowls of water and add salt to 2 of them. After de-veining, put the shrimp in the first bowl of water. Keep adding shrimp until you get about a half pound of shrimp, or however much you wish to cook. Then peel the shrimp, and put it into the second bowl....

How To: Model and animate falling shell casings in 3DS MAX

When people fire weapons in movies, there is often a shot of the shell-casings leaving the gun and flying through the air. Sometimes we get to follow them all the way to the ground, leaving us with a sense of loss at the firing of the weapon. This video will show you how to model and animate some shell casings falling to the ground and smoke trailing them in 3D Studio MAX and Photoshop, utilizing Reactor physics, particle flow, space warps, and all sorts of other fun 3DS MAX tools.

How To: Crochet a shell beanie hat

In this video we learn how to crochet a shell beanie hat. There are a total for seventeen rounds to make this beanie hat. Start out with a chain one and then single crochet in the starting loop. Continue to do this throughout the round and then join in the beginning single crochet. For the next round, you will single crochet and then create shells in the hat. Start out with round three, where you will start with a double crochet and then join the half double crochets with the beginning. When ...

How To: Hack a remote Internet browser with XSS Shell

XSS Shell is a cross-site scripting backdoor into the victim's browser which enables an attacker to issue commands and receive responses. During a normal XSS attack an attacker only has one chance to control a victim's browser; however, the XSS Shell keeps the connection between the attacker and the victim open to allow the attacker to continuously manipulate the victim's browser. XSS Shell works by setting up an XSS Channel, an AJAX application embedded into the victim's browser, that can ob...

How To: Make a spear for hunting in the wild

This is a method for making a native American free point spear using a bamboo stick, bamboo strips and some commonly found items. First take a sea shell and make a hole in it. Make the hole using a pointed stone and pierce an opening in the shell. Make the hole such that the shell fits the bamboo. Now the bamboo has to be split in half and for this you have to find a common stone which has a sharp edge on one side to split the bamboo. This is a common stone found anywhere. Now you have to tak...

How To: Shuck an oyster using the hinge method

In this how-to video, you will learn how to shuck an oyster using the hinge method. First, you must have cleaned oysters, oyster knife, a small towel, and a glove. The oyster has a flat top shell and a bottom shell. The hinge is where you will be inserting the knife. Place the oyster top side down on a flat surface. Insert the tip of the knife into the small hinge opening. Use force to push it in. Clean the knife and then pry it open. Slide the knife across the top shell towards the abductor ...

How To: Join a crochet round left-handed

In this video, we learn how to join a crochet round left-handed. First, join with the top level of the crochet. After this, half double crochet of the shell and join with the beginning of the shell. Now, join with the beginning of the double crochet. Go around to the beginning and join with the beginning of the single crochet using a slip stitch. Then, slip stitch between the joining. Now you will want to join with the slip stitch in the beginning of the double crochet. To finish, join with t...

How To: Draw Squirtle from Pokémon

First, begin by drawing a big circle in the middle of the page. Then draw a smaller circle (about a third the size of the bigger one) above your first circle. This will be the head. Next draw two lines where you want the arms to be, and one leg on the right side. Next draw two big eyes and a big half circle mouth as well as a little curl (for the tail) on the left side, opposite the leg. In heavier ink trace over the head and face and begin to draw arms around the arm lines you drew earlier. ...

How To: Make camp fire lobster tails

Dan "The Lobster Man" Zawacki demonstrates how to make campfire lobster tails. First, quarter lemon halves. Then, butterfly the lobster tails by pushing on the tail. Use shears and cut the underside of the lobster down the middle. Flatten the tail a little more and use a knife to slice the lobster open. Pour clarified butter onto the lobster meat and squeeze lemon juice onto it. Butterflying the lobster will make it cook a lot faster in its own juices in the shell. Wrap the buttered lobster t...

How To: Cook lobster tails at home

In this video tutorial, viewers learn how to cook lobster tails. Users can choose to bake or broil the lobster tail. Begin by cutting the outer shell of the lobster tail. Users should cut vertically down the middle and horizontally at the bottom of the tail. Take the tail meat. Now users can choose to add some seasoning or flavoring to the tail. Another way to prepare the lobster tail is too just cut the tail vertically in half and leave the shell on. This video will benefit those viewers who...

How To: Make Cascos de Guayaba (guava shells w/ cream cheese)

This video shows how to make Cascos de Guayaba con Queso Crema (guava shells with cream cheese). Ingredients: 1 15 oz. can of Guava Shells, and 1 15 oz. package of low-fat cream cheese. To make Cascos de Guayaba con Queso Crema (guava shells with cream cheese): Drain Guava Shells. Remove Guava Shells from syrup and put it into plate. Add 1 teaspoon cream cheese into each Guava Shell. Lightly drizzle syrup over top of Guava shell with cream cheese.

How To: Peel a hard boiled egg

In this tutorial, we learn how to peel a hard boiled egg. Before you do this, when you boil your eggs, make sure to boil them with a little bit of white vinegar to make them easier to peel. To start, lay your cooled eggs on a hard surface. After this, gently crack the egg on the hard surface, then start peeling out the outer hard shell from half of the egg. After you peel half, crack it again and start peeling the other half. To make it even easier, after you peel half, blow on the half that ...

How To: Paint your favorite sports team logo on a racing shell

In this video, we learn how to paint your favorite sports team logo on a racing shell. First, you will take your shell and trace out the logo on it with a Sharpie marker of your choice. Use tape to cover the areas that you don't want marked, so the lines come out cleaner and straighter. After you have done this, paint the logo onto the racing shell with small brushes and your choice of paints. Leave the tape in place until all of the paint has dried. Then, remove the tape from the shell and y...

How To: Shuck an oyster using an oyster knife

This video shows you how to shuck an oyster using an oyster knife. First, wear a metal mesh glove, used for protection, in case you slip-in and cut yourself, on your left hand. Then take the oyster shell on your left hand and pick the knife on your right hand. Then point the knife tip towards the shell, dig it and jiggle it in between the shell, and then grab the oyster from the wedge and twist the knife till the upper and lower parts of the shell are separated from each other. Once the two p...

How To: The Fastest Way to Get Pieces of Shell Out of Your Egg

I've cracked thousands of eggs in my life, yet I still usually mess up when I make my morning eggs. Sometimes I crack the egg to hard and end up leaving half of the white on the counter. Other times I don't crack the egg hard enough, and end up spending 20 seconds digging with my fingers until I can pry apart the shell. Sometimes I puncture the yolk on the shell, and other times the entire thing slips out of my hands.

How To: Cook pasta with soft shell crabs

Spring time means soft shell crabs. In this cooking how to video tutorial Mark Bittman, from the New York Times, demonstrates how to cook pasta with soft-shell crabs. Watch and prepare yourself for a delicious pasta and soft shell crab recipe brought to you by the dining section of the New York Times.

How To: Cook homemade taco shells

Planning on starting a Taco Tuesday tradition with your family? Then don't try to weasle your way out of keeping the meal healthy by purchasing premade taco shells. Usually these taco shells are made from refined, overprocessed flour that has very little nutritional value.

How To: Draw an adorable cartoon turtle

In this video, we learn how to draw a cartoon turtle. Start by drawing a circle with two large circles inside of it for eyes and a head. Next, draw a long neck for the turtle leading into a small shell. Make the bottom of the shell flat and a small tail sticking out of the back. Next, draw four feet coming from the bottom, then shade the back feet. Draw scales onto the shell, then draw a cute smile onto the turtle. Next, draw toes onto the feet and you will be done with your cute turtle. you ...

How To: Shuck a fresh oyster straight from the beach

In this video, Bill Dewey will show you the best way to shuck an oyster. You should have a knife and a glove so you will not cut yourself. Place the oyster on your glove hand. Keep the pointed side towards you. Take the knife and place it into the hinge. Twist the knife until you hear the hinge pop. Keep the knife against the top shell and scrape against the top towards the muscle. Now, open it up and cut the oyster from the bottom shell. Keep the liquor from moving off the shell. Now the oys...

How To: Peel and devein shrimp for dummies

In this video tutorial, viewers learn how to peel and devein a shrimp. Users will need a deveining tool. Insert the tool along the shrimp's backside away from the legs and push it towards the tail. The tool will remove both the shell and vein in one motion. If users don't have this tool, they can use a small knife or fork. Now run cold water over the shrimp meat to remove all traces of the shell and vein. This video will benefit those viewers who enjoy cooking and would like to learn how to r...

Prev Page