Hacksaw Search Results

How To: Pick a lock with a hacksaw blade

Can't open a lock because you've lost the keys? Well this conning how-to video will teach you how to crack open a keyed lock with a hacksaw blade.Our host uses a hacksaw blade as his pick. Follow carefully and learn the art of picking locks with a hacksaw blade. Pick a lock with a hacksaw blade.

How To: Model railroad scenery using extruded foam

Are your hobbies building model trains? Well, I hope you are building your own model sets the way you want to, but if you're stumped in the model railroading process, check out this nine-part video tutorial to see how to model railroad scenery using extruded foam. If you aren't into miniature rail transport systems, you will be now. Your landscape has to look good for your trains, doesn't it?

How To: Hack a Windows PC with a USB key

In this episode of Hak5, Darren shows us a USB key, dubbed the USB Hacksaw, that instantly and silently installs on target Windows 2000 or higher computers with guest or higher privileges which will monitor USB ports for flash drives and automatically download their contents for silent archival and email. For detailed instructions on replicating this hack yourself, watch this video hacking tutorial.

How To: Make a light up bubble tube

Lava lamps are cool and retro, but they can be expensive and there is a risk of fire if you leave them unattended and they tip over accidentally. By using this tutorial by Shooting Eggs, you can make your own light up bubble tube using materials you might already have around the house, and it will be safer and a whole lot cheaper than the kind you'd buy. Make one of these babies, and your 1966 love den will be all ready to go.

How To: Install a toilet for your home

To install the new toilet you will need a putty knife, hacksaw, tape measure, adjustable wrench, level, sponge, and replacement wax seal. Before you begin removing the old toilet, turn off and disconnect the water supply to the toilet. Then flush the toilet to get the water out of it. Use a sponge to remove any remaining water in the bowl or tank.

How To: Put together a tool kit for your home

The most important items in a tool kit, are the protection and safety equipment, like a breathing mask, ear muffs, and eye goggles. Other than that, tools vary on your needs. Some basics are a handsaw, a hacksaw, a level, a hammer, screwdrivers, a measuring tape, a shifting wrench, a chisel, pliers, a combination square, a utility knife, and a clamp. Watch this video home improvement tutorial and learn how to select tools for a basic tool kit.

How To: Build cheap prop tombstones for Halloween or effects

Follow along with Dr Kreepy in this quick video tutorial on how to do cheap and easy tombstones for your home haunt. You will need a marker, a hobby knife or X-acto knife, a hacksaw, an electric rotary tool, black acrylic paint, black spray paint, white paint, a spray bottle full of water, a paintbrush, and foam board. Watch this video special effects tutorial and learn how to make a cheap prop tombstone for a Halloween decoration or a film prop.

How To: Make an animatronic hand

Ever feel like you don't have enough hands? Build a third one! You will need a 3 foot aluminum rod, a piece of 2 inch by 4 inch wood, a 25 pack of 1/8 in by 2 inch toggle bolts, #6 by 1/2 inch metal screws, an electric drill, drill bits, 14 inch cable ties, and a hacksaw or chop saw. Watch this video tutorial and learn how to build an animatronic robot hand.

How To: Fit door handles to a door properly

This is a video tutorial in the Home & Garden category where you are going to learn how to fit door handles to a door properly. The first thing to do is to insert the spindle in the door and check if it is of correct length. Quite often it might be longer. So, cut it to the correct size with a hacksaw. Next fit the handle over the spindle and make sure it is straight. Take measurements to ensure this. Holding the handle in place with one hand, drill holes with an electric drill and insert the...

How To: Pick a door lock with homemade tool

In this tutorial, we learn how to pick a door lock with a homemade tool. This tool is made with a hacksaw blade. First, take a locked door knob and try to open it. If you can't stick a pin in the bottom of the knob, then push the saw into the middle of the lock as you are turning it. Continue to do this in a fast motion, making sure not to slip and cut your hands. Within a few minutes, the door knob will come unlocked and you will be able to open the door and go into the other room!

How To: Cut a bolt and save the threads

In this video tutorial, viewers learn how to cut a bolt and save the threads. The materials required for this task are: a hacksaw, steel bristle brush, bolt cutters, wrench, oil and a filer. Begin by putting some oil onto the threads of the bolt. Then place the saw on the desired groove and cut across through the thread. Now brush it with the steel bristle brush to remove the debris. Finish by removing the excess metal with the filer and unscrew the bolt(s). This video will benefit those view...

How To: Make your own single speed or fixie bike crank

In this tutorial, we learn how to make a single speed bike crank. You will need: chain ring bolt tool, large screwdriver, Allen wrench, file, hacksaw, vise, and crank set with 2 ring. First, grab your chain ring bolts and cut about 3mm off of the end. If the nut moves while you are cutting it, adjust it. After this, put your chain ring on the inside of the crank arm to align the chain. When you are finished, you will have a single speed bike crank! This tool shouldn't take too long to create,...

How To: Open your Nike+ iPod sensor and replace the battery

CadNYC demonstrates how to open the Nike iPod sensor casing. Replacing the iPod Nike sensor battery is easy and low cost with a few simple steps. First, place the sensor in a vice clamp and saw off the casing using a very thin hacksaw blade. then, open up the sensor compartment to have access to the battery. You can now remove the battery and replace it with another battery which will cost about two dollars. After you replace the Nike iPod sensor battery, use a strong adhesive to glue the cov...

How To: Pick a door lock

Arthur Cavallin demonstrates how to pick a door lock. To pick a lock, you will need to push up the pins and align them so that the mechanism will open. You will need a tension wrench which you can make with an alan key. You will also need a lock pick which you can make out of a hacksaw blade. Use the tension wrench to apply pressure to the front pin. Then, use the lock pick to push up the back pins. You can also use a quick raking technique to push the pins in. Insert the tension wrench into ...

How To: Make a potato gun/bazooka

Bill is in fact an expert in this field and refers to his book. He knows potato guns. So many small and not so small boys and girls would like to make a potato canon or bazooka. This is taken from the Backyard Ballistics book. Not only is this a fun activity, but it also teaches you about physics. You need some PVC pipe, glue, a hacksaw, and, of course, some potatoes! You also need an igniter and some hairspray. The potato fires out with some force and speed so adult supervision is required. ...

How To: Cut copper pipe with the right tools

This shirt video will show you how to cut copper pipe with the right tools. Cutting copper pipe is simple if you have the right tools. This short video clip clearly demonstrates how to go about cutting copper tubes. Among other things you will be using a pipe slice. The video also shows you how to remove the burrs before attempting to join the pipe. You are advised to never use a hacksaw.

How To: Build a propane tank Hank drum

You want to get your hands on the notorious Hang drum, but you can't because it's too expensive. Well, try your hands at the Hank drum, a Hang drum alternative that's cheap and easy to make. It was first invented by Dennis Havlena to imitate the Hang drum, and was made from old propane tanks. This video will show you the process of constructing your own Hank drum instrument from an empty propane tank, drill, electric saw, hacksaw blade, wrench, file and tuner. This project could cost you unde...

How To: Build a slide mechanism for a pipe CNC router

A CNC router machine is probably the most useful tool a hobbyist can own, but the price for a CNC machine on the market is way more than the average hobbyist is willing to spend. You can build your own CNC with very basic tools, little knowledge of machinery, mechanics, or electronics, but be warned, these machines are inherently dangerous, so wear the proper protection and use common sense. At the very least, read the instructions and precautions on every tool you use.

How To: Pick a door knob lock with a tension wrench &lock pick

Watch this video conning tutorial and learn how to pick a door lock. Maybe you locked yourself out of the house, or you're just a criminal trying to get in somewhere you don't belong. You will need a lock pick and a tension wrench. To make the lock pick in this video take a hacksaw blade and trace a lock pick onto the surface. Lock pick templates can be printed out all over the internet. Next grind it down to size either with a bench grinder or a dremel. To make a tension wrench take out the ...

Prev Page