Cleaning Supplies Search Results

How To: Take Apart & Clean an Xbox 360 Power Supply

YouTuber xCrAnKsHoTx teaches you how to take a apart an Xbox 360 power supply, aka power brick, in order to clean it. This could help prevent any red light issues, or overheating in the long run, so it's good to do as maintenance every year or two to remove all the dust in there.

How To: Make cheap homemade cleaning solution for your PC

Are you sick of spending a ton of money on not so great cleaning supplies? Well, if cleaning the screens around your home are the problem, check out this tutorial. In this video you will learn how to make a super effective cleaning solution for your TV, PC, laptop, iPod screens, etc for about a dollar! This couldn't be easier to do, and your screens will be clear and shiny in no time.

How To: Get permanent marker stains out of your carpet

To follow along with this video, you will need a few supplies: a spray bottle filled with lukewarm water, a couple of clean white blotting towels, and a product called Legacy of Clean. To remove the stain you begin by applying a few drops of Legacy of Clean onto the stain. Use the blotting cloth to agitate the product into the carpet fibers by rubbing it a bit. Then find a new clean spot on the towel, place it over the stain and apply pressure from your fist to blot the stain. You will see th...

How To: Avoid RV problems by cleaning your hookup cord

Gary Bunzer the RV Doctor shows how to avoid potential RV problems by cleaning your electrical hookup cord. Before you connect your RV to an electricity supply, make sure to clean and brighten the metal contacts on your shoreline cord. Use fine-grade steel wool to clean all surface corrosion off your cord's prongs. You can also use sandpaper, emery cloth or any other gentle abrasive. After you get the metal prongs clean and shiny, use a dauber or brush to coat the surface of the prongs with a...

How To: Clean a barbeque grill and grill grates with Lowe's

Our host today shows us different types of methods for removing rust from your grill or pit. Regular cleaning is described in your manual and consists of removing rust, polishing chrome, and removing coal from the pit. With just supplies from around the house you can clean your chrome for little to nothing. He shows us how the basics of removing grills and what to check for to keep your grill cooking smoothly. In the end, your knowledge of grill cleaning should improve and you are now ready t...

How To: Start stretching your ears

In this video, we learn how to start stretching your ears. To do this, you will need a tapper that is small and pointed at one end and large and thick at the other. You will also need cleaning supplies to sterilize and clean out your ears. You can also use pinchers, because they will distribute out weight evenly around your ears. When you first place these in your ear, it may pinch a little bit. Leave the pinchers or taper in your ears and then keep them locked down with new jewelry. After th...

How To: Make an occupied bed

In this tutorial, we learn how to make an occupied bed. First, gather the supplies from the linen closet. After you have all the sheets and blankets, put gloves on and walk into the room. Now, cover the patient with a bath blanket. After this, remove the top sheets, then roll the patient to the side of the bed. Next, tuck dirty linens close to the patient and then roll clean linens under the dirty ones. Then, fix the clean sheets up and roll the patient towards you and repeat the same as you ...

How To: Stage a kitchen to sell your home faster

It's important to make your kitchen as much like the kitchen the buyers would want as possible. To do that start by cleaning and organizing everything in the kitchen. Completely empty all the horizontal surfaces in the kitchen. Get rid of all the clutter like keys, receipts, notes, and vitamins. Next you will want to organize everything in the cabinets. Line the cabinets with mats and stack up the plates and dishes nice and neat. Sweep and mop the floor and organize the cleaning supplies unde...

How To: Make homemade bathroom cleaners

Are you worried about how your bathroom cleaning supplies are damaging the environment and your own air? Use these recipes to create non-toxic, homemade bathroom cleaners instead. Never mix homemade cleaners with commercial cleaners, because when mixed, they can produce toxic gases. Use the same safety precautions as you would with store bought cleaners- keep them out of reach of children and pets, and out of your eyes and mouth. Always work in a well-ventilated area. Store your cleaning ingr...

How To: Make homemade kitchen cleaners

With these recipes and tips to mix safe, non-toxic, homemade kitchen cleaners, you can stop worrying about how your store-bought supplies are harming your home and the environment. how to make your own kitchen cleaning products using a few, inexpensive ingredients you can get at the grocery and health food stores.

How To: Stop microwave odors

Microwaves have the annoying tendency to absorb the smell of the foods that are cooked in them. Although most people do not mind this on the day of the cooking, after a week of the smell, it begins to get old. If you want to remove that fishy odor, just follow these simple steps. First of all, make sure that the microwave is as clean as you can get it with regular cleaning supplies. Getting rid of the smell will be so much easier if there are no splatters covering the inside of the microwave.

How To: Remove the power supply from a G5 iMac

Removing the power supply from the iMac G5 is a two step process. First, see where the power supply is located. Then begin the process of removing it. You can do using a very easy way described in this video. First unscrew the 4 torx screws that are located around the edges of the power supply. Be careful not to be too rough while doing so. Once you have unscrewed them, then gently lift or remove the power supply. However, we still have to unplug it from the iMac. Therefore, carefully unplug ...

How To: Clean a dog's ears of dirt and wax

Your mother used to remind you to wash behind your ears now make sure you keep your dog in tip top health and clean their ears too. Dogs depend a lot on their hearing but can build dirt and wax in and around their ears which can be irritating or lead to infection.

How To: Upgrade your power supply on a PC

Upgrading your power supply can solve all sorts of problems that may arise after upgrading your PC's hardware. THe Lab Rats, Andy Walker and Sean Carruthers, will let you know how to tell if you need to upgrade your power supply and if you do they will help you figure out what kind you need and show you how to install it.

How To: Change a baby's diaper the right way

This video shows you the proper way to change a baby's diaper. First you will want to gather all of the supplies you will need before you begin. You will need a diaper, some baby wipes and some ointment. Next remove the babies clothes, raise their legs and place the clean diaper underneath your baby before you remove the old one. This is to ensure if your baby urinates or defecates it will go into the new diaper rather than all over your table. Now take the old diaper off, hold the legs up so...

How To: Breadboard a DIY USB power supply

While breadboarding may seem like some odd combination of snowboarding and consuming the fluffy pastry at the same time, it's actually just the technical term for using a construction base to build a prototype electric circuit. Breadboards are solderless so they're great for circuit design and are reusable.

How To: Make a catapult out of office supplies

Looking for something fun to do with all those office supplies you've been stealing from work? Or maybe you just want to goof around in your cubicle? It's possible that you are an honest, dedicated, hard worker, but whatever the case may be- no judgement, just a video guide to making an office supply catapult.

How To: Set up an Element Tattoo power supply

Steve of Element Tattoo Supply demonstrates how to set up a tattooing power supply, specifically the Silver Bullet model. It has a voltage switch on the back. If in the US, set the power supply to the 115-volt setting. Outside the US, switch to the 220 volt setting. There are two power plugs in front for tattooing equipment (such as a foot pedal), and a dial for adjusting the power. The relative power is displayed on a LED display.

How To: Install KronoSwiss laminate flooring

While remodeling or redoing a room, many owners will inevitably want to install laminate flooring. This video shows how to install laminate flooring beginning with what tools and supplies will be necessary and then showing panel-by-panel how to install each floor panel. It also goes over how to install a piece around existing pipes or other things that require a difficult shape that is not a rectangle. The video even goes over installation of perimeter molding as well as how to care and clean...

How To: Fix a running old style fill valve toilet

This Home & Garden video shows you how to replace a running old style fill valve toilet with something more modern. Shut the supply line to the toilet and flush to remove the water from the tank. Then remove the supply line. Now take a wrench and loosen the plastic nut of the old fill valve located under the tank. Then lift the old valve and keep it aside. Take a 'flow master', which is a new type fill valve, place it in the same spot and hand tighten the nut under the tank to hold the flow m...

Prev Page