In this tutorial, we learn how to replace the air filer in our vehicle. Remember to do this every 12 to 13,000 miles you drive the vehicle. First, you will need to buy a new clean air filter that fits inside of your vehicle. Now, turn the engine to your car off and open up the hood. Next, undo the clamps around the air cleaner housing and lift the housing up. Now remove the dirty air filter and insert the new one in its place. Now, lower and secure the housing clamps again and you're all fini...
After you've applied your auto body filler on your vehicle, you'll need to apply a glaze. In this video, you'll learn how to apply a 3M Finishing Glaze. Their new Dynamic Mixing System is a good one, and the product mixes instantly when it exits the tip of the gun.
If you've ever popped the hood of you car and went, "I can do that," then you're about to get your chance. A Japanese company called Modi-Corp has unveiled its plans to release a kit that will let you put together your very own electric car. Granted, it's not that impressive of a vehicle. Actually, the "Pius" is just a one-seater and somehow strangely classified in Japan as a "motorized bicycle." The "car" will only be able to reach top speeds of up to 21 mph, making it more of a go-kart than...
Uh. This thing is incredible. Just watch it move. The real action starts around 0:30. The beast has been named Chainlink, and was made from salvaged parts and a fuel injected Ford 5.0 V8 engine, taken out of a '93 Cobra Mustang (via creator/YouTube user rhauf1).
Charlie Miller and Chris Valasek conducted an experiment earlier this month that ended up with a Jeep in a ditch, although the driver didn't drive it there. The two remotely hijacked the car, controlling it through a laptop and a cell phone. FCA says vehicles from the 2013 and 2014 model years with 8.4-inch touchscreen are affected. That includes Ram pickup trucks, the Dodge Durango, the Jeep Grand Cherokee and the Viper. Some 2015 Chrysler 200 sedans are also affected.
This automotive repair tutorial shows you how to remove rust and repair rust eaten and damaged metal. Doors, bumpers, rails and every metal part on your car is prone to rust. If rust has or is eating away at your vehicle this video shows you how to remove and repair the rust damage. You will need a welder and a grinder.
Ever wonder if you could drive a stick shift? Well, wonder no more and get your ass inside that car. Just watch this automotive video tutorial on how to drive a manual transmission vehicle, car or truck.
An installer shows how to drill out an existing frame hole to make it larger to accommodate the installation of a trailer hitch.
In this tutorial, Creative Cow contributing editor Carl Larsen shows you how to build an expression-based vehicle rig that automatically calculates the rotation of its wheels based on the movement of the vehicle chassis.
The guys at Poor Man Mods show you how to clean an air filter with a can of brake parts cleaner. Instead of buying cleaning kits that cost $15 and can damage your mass airflow sensor with the oil they contain, a can of brake parts cleaner does the job awesome and brakes down all the grease, grime and oil, leaving the filter media squeaky clean!
Turn your stock fans into 100% manual fans by tacking out the AC relay. Doing so will stop the signal to your compressor telling it to turn on when you hit the AC button. However, the fans will still kick on when pressed, and when released the fans will turn off. This will give you 100% free manual electric fans whenever you want. If it's a hot day and you want the air conditioner on, all you have to do it put the relay back in.
The rear window is by far the hardest to tint due to the curvature from side to side and usually top to bottom as well. But don't worry, this video will walk you through the tricks to getting that film to lay flat. NOTE: this strip method is older and will work but is rarely used today - there is a one piece shrink fit method used instead.
Reduce the risk of blown fuses, blown sensors, shorted wires, and even possibly increase shift times on an automatic and possibly increase horsepower with a grounding kit! All you need is some wire, terminal ends and electrical tape or heat shrink. To make this work, all you have to do is run ground wires from essential components to a good ground area, such as the strut tower.
Elemental Designs will show you how to carpet a basic subwoofer box for your vehicle's system in this two-part video series. If you've ever had any trouble in the past trying to carpet your sub box, this will help explain what you might have done wrong. First you have to pick the carpet for your subwoofer box, then you have to make sure it's the right size. It's just like wrapping a present, a present for your automobile's stereo. Carpet a basic subwoofer box for your vehicle's system - Part ...
Replacing your car's air cabin filter is a relatively simple repair that can be done in a few minutes with minor tools in most cases. Always wear protective gloves and eyewear before you begin.
This video tutorial stresses keeping on top of your car's tire alignment. If there is a problem with your tire alignment, it can cause your tires to wear out excessively and uneven. One of the few tips on detecting if your alignment is off is when taking turns. If your car feels like one tire is pulling in a different direction then others, then you might have a problem. They insist on getting your tires alignment checked before it can cause any long term damage to your tires and/or suspensio...
This is a taillight adapter which will convert your two wire system on your towing vehicle up to a three wire system to your towed vehicle. Certain applications will be say, your RV has a four wire system on it or maybe a five wire system converted down to a four wire but your towed vehicle has separate turns signals and brake lights. You would use this box to convert it back up to that at the rear of the vehicle. See a few technical points on how it actually gets installed in this video.
LEGO Technic builder Peer (Mahjqa) Kreuger has constructed the incredible Stilzkin Bridge Launcher, a vehicle modeled after real life ALVBs (Armoured vehicle-launched bridge).
This video is regarding air conditioner services. Leaks are a major cause of problems. Water and air can leak into the system. Water damage, rust and refrigerant leaking all make the unti ineffiecient. You should evaluate the unit regularly and also run it periodically to keep the system from working properly.The manual should provide a good amount of information that will help you ensure you are not doing anything to damage the system of repair it incorrectly. Service your vehicle's air cond...
John Deere Gator XUV and HPX utility vehicles are built for safety, for you and people around you. But it's your responsibility to understand those safety features and to use them. This video covers some of the important points for safe operation. Please watch it and share it with others who may operate your Gator. Use a John Deere Gator XUV or HPX utility vehicle.
John Deere Gator Traditional Series utility vehicles are built for safety, for you and people around you. But it's your responsibility to understand those safety features and use them. This video covers some of the important points for important operation. To learn how to keep safe, while getting the most out of your Gator, take a look! Use a John Deere Gator Traditional Utility Vehicle.
As Popsci says, these DIY snow vehicles show winter who's boss. The Snow Chopper
This is a cool thing that shows how to make a remote controlled submarine with a camera attached. If you live near a large body of water, you should make one of these.
The hammer and dolly method is probably the easiest repair technique for dents, but it requires that you have access to both sides of the panel being repaired. However, newer cars have many areas that do not allow you to use the hammer and dolly method. There are two techniques when using hammer and dolly—hammer off dolly and hammer on dolly.
If you're fond of remote-controlled vehicles, you might appreciate this video tutorial on how to assemble a Traxxas high-current connector. To add a high-current connector to your Traxxas R/C model vehicle, you're going to need some pliers, wire strippers, flathead screwdriver, solder and a soldering iron. Replacing the old connector is easy, and will help give your hobby RTR (ready to run) nitro and electric model car or monster truck some life in needs.
If you're fond of remote-controlled vehicles, you might appreciate this video tutorial on how to program a Traxxas electronic speed control. The Traxxas R/C ESC models you will learn to program are the XL-5, XL-10, EVX-2 and VXL-3S. They all have a single push button to turn on and off the ESC and program it. To get the most out of your Traxxas RC vehicle, learn to set up the programming by calibrating the electronic speed control, transmitter, throttle profile selection.
RC Car Action Editor Matt Higgins show you how to properly jump your R/C vehicle. To prevent nose diving, use the throttle, or brakes to prevent a nose up too high. Watch this video tutorial and learn how to jump any remote control vehicle.
This tutorial shows you how to resolve issues with your Nitro RC clutches. Sometimes applying the clutch can be difficult and result in damage to your vehicle. This shows you how to properly put it on and gives you some tips on how it shoule be put together and what to watch out for. Enjoy!
If you ever owned an RC racer (like a 777) and wanted to install a BB (big block) engine other than a bump start.... this video is for you! This will show you ways to install anything onto any platform for your radio controlled vehicle.
In this video, we learn how to clean an RC Nitro Truck or car. First, remove the wheels from the truck, then take an old toothbrush and brush the dirt and dust off. Don't force the brush into small places, just thoroughly brush all the dirty and clogged spots like your filter. Continue to brush the entire truck and make sure nothing goes into the carburetor. Now, take a damp cloth and use it to wipe the dirt off of the vehicle, giving it a good cleaning. Wash the wheels after this, then dry t...
If you own a Traxxas Rustler, Stampede Bandit, or Slash RC vehicle, then this next tutorial may be for you. In the tutorial, you'll be finding out how to clean the transmission to your machine. Just like a car, keeping your RC vehicle in tip top shape is important for ensuring that your machine will last for a very long time. So if you need help with cleaning out your transmission, check out the tutorial above and good luck!
In this how-to video, you will learn how to put back a 2 speed central gearbox in your RC vehicle. Take the time to clean your car. Remember that the shorter dog bone goes to the rear and the longer one goes to the front. Slide the dog bone in and make sure that it spins the wheels. Now, raise the dog bones and slide them into the drive cuffs of the central transmission. Once this is done, check by moving the tires to see if the gears are moving. Make sure the box fits into the place provided...
For all you future RC fans out there, if you're having trouble setting the Nitro engine gear mesh up on your RC vehicle, do we have the video for you. This tutorial will give you about 8 whole minutes of how to properly set up this easy task. Although it says it is for Nitro, it can be used with others as well. Enjoy!
This tutorial shows you how to set up the high voltage wiring for your RC kit. Although this is not a basic step for putting together your RC vehicle, it can be used to help make things easier. Be careful though, this can mess up your ability to use a remote control. So pay attention and enjoy!
This next tutorial can be a bit dangerous and requires that you take full precaution when performing this. With that out of the way, in this video, you'll be finding out how to remove the anodize from aluminum and then polish it for a nice clean, sparkling look. It's pretty easy to follow and can lead to a nice look for your RC vehicle, so check out what you need to do and good luck!
If you're having a hard time figuring out which tires are the best for your RC vehicle, then this tutorial should help.
Just like cars, RC vehicles need to be kept in fine shape in order for them to work properly. Doing so will result in a long lasting and healthy vehicle. In this tutorial, you will learn some tips and tricks to putting an RC engine back together again, after you've worked on it. So good luck and enjoy!
If you call yourself a hobbyist or a kid at heart, you know that remote-controlled vehicles are more than just fun. If you're a serious R/C man, you'll know all about doing everything to your model truck or car, like fixing wheels, vamping the pinion gears, waterproofing, troubleshooting, electronic diagnostics, setting up, programming, and finally... racing. As much as you know about these remote-controlled vehicles, it will never be enough; you'll always be looking for more...
This video is on how to easily solder bullet plugs that are commonly found on remote controlled brushless (BL) motors. Your radio controlled vehicle will be the best around, if you know how to solder.
RC Car Action Magazine Editor Kevin Hetmanski shows us how to add decals to your RC vehicle. Decals add a little personalization and decoration to a remote control car. Watch this video tutorial and learn how to affix stickers onto the plastic body of an RC car.
