Under Settled Search Results

How To: Install a BMW E46 M3 AFE Magnum Force Intake

Performing minor and major tweaks to your car can not only help it perform better, but look cool as well. Why settle with what you got at the dealership? Why not improve your car's overall value and in the same time add something that will make others jealous. In this tutorial, if you have a BMW E46, you'll be finding out how to install a M3 AFE magnum force intake for your car easily. So sit back, enjoy, and good luck!

How To: Plant an iris

This video shows how to plant an iris. Be sure to select a spot that gets about six inches of sun a day to plant an iris. When planting more than one iris, be sure to space them about a foot apart. This will encourage them to grow tall. When you dig the hole, don't dig it too deep. Also, make a little mound in the center of the hole. Spread the roots of the iris over the little mound so that the hole drains and the plant doesn't rot. You want about a third of your rysem sticking up out of the...

How To: Pan for gold in a lake

In this Outdoor Recreation video tutorial you will learn how to pan for gold in a lake. You will need the sand that you mined for gold. Put some sand in a pan, put water in the pan and mix it with your hands. Then stir the pan underwater. Loosen the sand with your fingers and keep stirring the pan. Gold being heavy, this will make the gold to settle down at the bottom of the pan and the dirt will remain on top. Then give the pan a good shake and tap it at the bottom. Now you pan the dirt out....

How To: Plant bulbs

Scott from Spring Hill Nursery with Step by Step Gardening talks about planting fall bulbs. Planting bulbs is very easy. You just need a shovel, good soil, and lots of water. The bulbs he plants are tulips bulbs, lily bulbs, glad corms, and iris rhizomes. All of these must be planted in the fall to bloom in the spring. It's easiest to dig one big hole - about 6-8" deep - and plant all of your bulbs at once. A random pattern yields a natural look. Once you've placed your bulbs, put about 2"-3"...

How To: Assemble a shock assembly on an RC vehicle

Squirrelod shows you how to put together a shock assembly or a shock absorber on a Factory Team remote control car kit. He takes us through building the piston - shaft, dampener, nuts and over rings step by step. Practical tips and tricks involved in building up the shaft and the recommended oil used are presented. This is not something that should be done in a hurry since time is needed to let the oil settle thus removing any air bubbles in the piston. Although the instructions for different...

How To: Control dog fleas with home remedies

This video illustrate us how to control dog fleas with home remedies. Here are the following steps.Step 1: First of all take some water and wash the dog with it.Step 2: Now take markotic powder and spread it on the dogs fur. If the fur hair is long then comb in the opposite direction for the powder to settle down. Leave it for some time.Step 3: You will find all the fleas on the surface of the fur.Step 4: Now dip a towel in water containing alum and sponge the dog with this towel .All the fle...

How To: Make a pumpkin spice martini

You need to have three kinds of ingredients – Vanilla vodka, pumpkin spice liquor, and Baileys. Find your martini shaker and fill half of it with ice. Add one ounce of vodka, one ounce of pumpkin spice liquor and one ounce of Baileys all in equal parts. You do not need to measure it exactly; you could just pour them into the shaker just approximately in equal parts. Put the cap on your shaker and shake until the outside of the shaker is frosty cold. Then pour the contents of the shaker into a...

How To: Make homemade cheese

Alexa from SustainablePantry demonstrates how to make homemade cheese in under 5 minutes. Pour 1/2 gallon of whole organic pasteurized milk in the pot. Heat it to a rolling boil over medium heat. Add plain distilled white vinegar. Stir frequently until you see the milk splitting into lump of curds. These curds are your homemade cheese. When the curds have settled, slowly pour the curdled milk into the colander with a cheese cloth. Drain off all the liquid until it become more and more cheese ...

How To: Practice saying the "t" sound in the middle of words

In words like bottle and mitten, the "t" really isn't a "t" sound; it is more of a "d" sound or a very fast "t" sound. Practice the "t" sound with the words button, carton, brighten, tighten, fatten, eaten, rotten, matter, butter, flutter, water, bottle, settle, and metal. In American English, the "t" sound is very difficult to hear in some words. An example of this is the word butter, where the "t" sounds more like a "d." Remember, the way people speak English in the United States is differe...

How To: Adjust a front derailleur on a mountain bike

The video is about adjusting the front derailleur of a performance bike. To adjust the front derailleur you have to first adjust the rear derailleur to the smallest gear. To adjust the front derailleur shift the gear to the largest. If it does not slip into largest gear then adjust the barrel adjuster by turning it counter clockwise till it settles into the largest gear. Turn the barrel adjuster until it stops rubbing against the chain. The full process can be carried out whilst riding, it is...

How To: Make your own customized clock

Clocks are an essential part of your home, but you don't just have to settle for whatever clocks you can find at the store. Is this tutorial from Decor it Yourself, you'll learn how to make a funky timepiece that suits your style. Almost anything can be a clock, as long as you put a drill through it and stick it the wall!

How To: Design for multiple browsers

James Williamson for Lynda demonstrates designing for multiple browsers. The most frustrating aspects of web design is constantly dealing with the settle and some times not so settle differences in browser rendering. While they moved to a standard spaced, CSS control presentations has made life infinitely easier for web designs. Dealing with bad browser behavior is one of most unfortunate side effects. All browsers render our pages same because each browser reads and renders the HTML and CSS ...

How To: Make no knead bread

Watch this video to learn how to make no-knead bread. In a large mixing bowl, dissolve yeast into water. Stir in flour and salt (dough will be sticky). Cover with plastic wrap and let sit in warm place for a minimum of 8 hours at room temperature (approximately 70 degrees). Ten to twelve hours may be necessary, so letting it sit over night is a good idea, provided there aren't any dogs that will jump on the counter! The dough will be ready when the surface is covered with bubbles. Lightly flo...

How To: Drink like a man

Getting weird looks from the other dudes at the bar? Maybe because you're ordering a sex on the beach like the other women. Spit out that tropical drink or wine spritzer and throw away your stemware. It's time to put some hair on your chest, hoss.

How To: Make a Scottie dog from folded paper with origami

Take a piece of paper and fold it triangle wise. Then unfold it and fold two edged sides towards the center. Then turn back in the same manner and fold right there. Then again turn back and fold two sides as done before. Then straight that part and fold into two sides and then fold one side to an upside direction. Then fold it downwards holding the center part. Then again fold downward the folded portion and a little bit upward the edged part. Keep intact the edged portion. Then fold the next...

How To: Find the average value of a function over an interval

When you have to find the average of two or five numbers then you have to add all the numbers and then divide then by two or five respectively. However in the case of the function you have infinite many values over any interval. But it is not possible to add all and then divide by infinity. Therefore you have to calculate in a different way. Imagine that you have to find the average of y=f(x). Then you have to average it from the interval from ‘a’ to ‘b’. The inner area under the curve shall ...

How To: Install a pond skimmer

Install a pond skimmerThe most critical steps to installing a skimmer are the water level and attaching the liner to the face plate with a water tight seal. The pond should be rocked in. The skimmer needs to be level from front to back and side to side. That's critical. Optimum water level is approximately 3/4 inch down from the top of the steel face. Use the level (tool) to determine the water level on the face plate. It's important to have the weir door work effectively. Prepare the area fo...

How To: Origami a paper airplane "Nakamura"

Watch this visual demonstration on how to fold the paper airplane Nakamura. The Nakamura is a awesome plane. Do not squeeze the nakamura's keel together like you are throwing a paper dart or airplane. This nakamura does not have a trajectory. It follows a distinct and flowing flight path. With the nakamura at rest, and the keel in its natural 'V' shape, is the shape it must be flown in. Do not throw the nakamura. Gently push it on its way and if it is trimmed properly, it will find its glide ...

How To: Pan for gold outdoors

In this Outdoor Recreation video tutorial you will learn how to pan for gold outdoors. This is a good excuse to play in the dirt for young kids or even for the whole family. Go to the woods, find a stream that is shallow and the current is not strong. Choose a spot that has roots, because the gold gets in the roots. Scoop up some mud in a deep pan and remove all big stones from it. Then put the pan underwater and stir it. Loosen the mud with your fingers and keep stirring the pan. Gold being ...

How To: Power carve a bonsai

Carving a bonsai tree can be an interesting and rewarding experience. One may think that the tree would be injured in this process, however the process can actually strengthen the health of the tree. The first step when carving a bonsai is to reduce the height of the tree to about one meter. The necessary tools required consist of: a high speed grinder, a rotary cutter, and a weasel. The rotary cutter is good for removing large amounts of wood. Before beginning to cut the tree look at the tre...

How To: Filter vegetable oil to make biodiesel

In this video, Tom Carpenter explains how to filter vegetable oil into bio-diesel at home. After collecting a large amount of waste vegetable oil, place 30 gallons of it into a modified (by removing the top heating element) water heater. Use a pump and hose to circulate the liquid through the water heater. Heat the oil to 120-130 degrees Fahrenheit. In a separate container, mix methanol and sodium/potassium hydroxide (methoxide). After disconnecting the heating element from the water heater, ...

How To: Build confidence in the bedroom

Patricia Stark has helped to regain confidence in your bedroom she's not telling us how to be a Sex God or to sleep around she’s just helping us be confident about ourselves. She tells us to avoid thoughts about fatigue, looks and complexion about size and figure. People that cheat only do it to make themselves feel better.

How To: Make a smoked chicken lasagna using your barbecue

You can now cook that delicious smoked chicken lasagna you've always longed for with this easy step by step tutorial. Place your raw boneless chicken in a bowl. Add a tablespoon of salt, pepper, basil and oregano. Pour an ample amount of virgin oil into the bowl to let the ingredients stick to the meat and mix with your hands. Let the meat settle for about 30 minutes. Grill the chicken for 40 minutes at a temperature of 225 degrees then at 300 degrees for 20 minutes to finish it off. When you...

How To: Prevent road rage

The road can sometimes resemble a battle field. Tailgaters, horn-honkers, and jerks who cut you off are enough to drive any driver batty. Here's how to keep your cool behind the wheel and stay calm during moments in which you'd like to explode.