DominickDiy teaches you how to use a wood router. You figure out what and how you will use it for by looking at it and adjusting the blade. Then lock it into place and you're ready to cut. The piece of wood you'll be working on should be on top of a piece of rubber mat, so that the wood doesn't slip. You also don't want the router to slip, as it might injure you or cut a wrong way. You go from a rip to a cross cut, when going from one side to another, via a corner. So one time you will be pus...
This square dance video teaches the following square dance calls on the mainstream list: Do Paso, Thar, Allemande Thar, Slip the Clutch, Shoot the Star, Wrong Way Thar.
Watch this instructional video with ceramics expert Simon Leach to learn how to trim and glaze Hakeme tea bowls. Leach uses a groggy, toothy clay which contains high iron content. He then adds a white clay slip with Hakeme grass brushes, which provides a thin layer of natural white clay texture, using a scratching technique. The white slip should be applied when the clay is still quite soft. The striking effect of Hakeme ceramics becomes more apparent as the clay dries.
Superbike Magazine starts with the roll on power wheelie. They talk about weight balance, throttle control, slipping the clutch and coming down on a lunge when pulling wheelie stunts on a motorcycle.
To make a rainbow, blow up three tube-shape white balloons, twist the bottom ends of the three balloons together, then braid the balloons together like you would for your hair. Twist the top ends of the balloons together. This will now be the cloud that your rainbow will be sitting on. Now choose three more tube shape balloons of different colors. The different colors will be the colors of the rainbow. Blow the balloons up. Get the first color and twist a little ball out of one end. Slip the ...
In this tutorial, we learn how to pick up stitches along a curved edge. You can see the slope on your fabric that you can work with. If you slip the first stitch you can avoid this. First, slip the first stitch and then bind off the next stitch as usual. This will create a nice curve. To pick up stitches, you will use a circular needle and then poke it through the area in the last row. Find a 'v' shape and then push the needle through this. Pull through just like you are normally knitting and...
In this video, we learn how to infight in boxing. To get on the inside you either have to slip or block. When you slip, you will get closer and closer to the opponent you are again. When you are on the inside, you can do the damage you want to do. Another way to get inside is to block all the hits they are throwing at you so they are blocking themselves and you can get on the inside. This sounds easy, but it takes a lot of strength and energy. You will have to endure the hits against you and ...
In this tutorial, we learn how to crochet a beanie hat. First, you must place the yarn around your fingers, then thread through the needle with a slip knot. After you do this, grab the yarn and move the string through the slip knot to make a chain stitch. The next type of stitch you will do is a seam stitch, where you will find a hole and grab the string, then bring the needle through so you have two loops around the needle, then bring it back through the hole. You will continue to do these s...
In this tutorial, we learn how to install dual exhaust on your tractor! First, find the exhaust strip on the tractor, then detach the muffler and slip the regular pipe into the muffler. After this, get a 3/4" pipe and slip it up into the other pipe and well around it. It should come to the bottom of the tractor. Next, take a bushing and connect it to the elbow pipe. Connect a short pipe and connector to this, then connect a long straight pipe that goes into the dead center of the bottom of th...
In this tutorial we learn how to crochet a duck finger puppet. In order to make the bill, start with three stitches on the front where you crochet a front loop to work with. Start with the open end facing you, and pull a loop up with your yarn, like a slip stitch. Now, chain one and single crochet into that on your first stitch. Single crochet in the next stitch and in the last one as well. Now, go into the center stitch and single crochet in that making a point at the beak. Now, slip stitch ...
In order to make a bow headband without doing any glue or sewing, you will need the following: a headband, a hair tie or rubber band, and a piece of ribbon or a belt.
In order to tie a 7 x 5 Turks Head Knot, you will need to begin by draping the rope or twine over the fingers of your outstretched hand. Fold your pink down, leaving your three fingers outstretched. Catch the string in front and hold it with your pinky.
For some, there's more to fishing than just using a rod and some fishing line. There are more tools and pieces of equipment that fishermen use to help make it easier to get a hold of a nice size fish. So in this helpful tutorial, you'll find out how to adjust a float/slip bobber rig when going out and fishing. It's easy to adjust and can help in your quest toward getting a nice sized fish. Good luck and enjoy!
Webbing is not only used in sports like rock climbing and caving, but it also comes in handy in camping and hiking. This video shows you how to tie two webbing ends together to make a loop that will not come off. A square knot does not work for webbing as it will slip through, therefore a water knot is used. Take 4 inches (10 cm) from one marked end and tie an overhand loop. Ensure that the webbing is not twisted. Slip the other end in the knot and trace the second end around the overhand kno...
You will need: white glossy card stock, 2 ink refill colors, an optional metallic ink refill, cotton ball and rubbing alcohol.
This video shows the viewer how to use paper tape to cover the joint between panels on a dry wall. The creator of the video does this using a 6-inch dry wall knife and a curved trowel. He first applies standard compound to the joint using the trowel. The compound should be applied evenly and the thickness shown is said to be around 1/8 inch. After applying the compound he then gently presses the tape over the joint. He then smoothes the tape on the wall, using a dry wall knife. While doing th...
The knots demonstrated in this how-to video are a good way to hang a hammock, because it makes it so easy to adjust your hanging height. The whipping knot around the tree will not slip if tied correctly. Make sure to tie the second half hitch or the knot may slip and come loose. As with all knots, use your own discretion and be safe. Watch this video survival training tutorial and learn how to tie some sturdy knots useful for hammock-hanging.
Here is a basic series for those of you who are either just getting started with turntables or would like to soon. In the first video, we do a very basic introduction, add slip mats, set up the tone arm and set the counter weight. In part 2, we talk about records, manipulating vinyl, Cueing, Pitch & Phasing (or jeting) with 2 copys of the same record. In part 3, we cover the Baby Scratch, Scratch & release, Looping, Mixing 2 songs with the same BPM and 2 songs with different BPMs.
If you are looking for a healthy and flavor packed meal to change up a boring lunch routine then your in luck. This video will show you how to make a pita hummus pocket. You can make your hummus from scratch.
Before you endeavor to make these stylish sunglasses, you should note that they're intended more for decor and play (think Lady Gaga's memorable smokey cigarette glasses in her music video for "Telephone") than for actual wear.
Finding the perfect seat and handlebar height on your bicycle can mean the difference between a comfortable and irritating riding experience. In this tutorial, Ryan from BeachBikes.com, shows you how to make sure your bike is the perfect size for your body so you aren't slipping and sliding while you try to ride.
How to take off the iPhone earbuds and replace them with whichever ones fit your ears and sound best. This can help because you keep the button and the 1/8" jack that slips into your iPhone. You need a soldering iron to remove the earbuds.
Learn how to play "I Hate This Part" by Pussycat Dolls, an acoustic guitar tutorial. Follow along with this demonstration, lyrics here:
This how to video tutorial will show you the basics of knitting. Follow along and see how easy it is to actually knit. Anyone can learn to knit and it's a great craft to know if you want to give handmade gifts! Learn how to do a slip knot, cast on, and how to bind off.
If you never were a scout, or you've forgotten all your skills, this how-to video is for you. If the loop is under weight, the knot will not slip, but you will still be able to adjust the size of the loop by pulling down on the knot by hand. Perfect for all of our tarp tying needs. Watch this video survival training tutorial and learn how to tie the tautline hitch knot.
Watch this video to check out how to make a home made rabbit snare. If you can't find stainless steel wire, brass or copper will work just as well. Make sure your string is very strong. Consider using a braided twine that is treated with a non-slip coating to prevent knot slippage.
Check out this awesome Achievement Hunter guide to earning the Racing for Pinks achievement in L.A. Noire for Xbox 360. This video will take you through the A Slip of the Tongue DLC and show you what a detective's gotta do to earn an Xbox 360 achievement.
In this episode of Mechanical Mashups, Dave will show you how to keep your tools organized by cutting tool shaped spaces out of foam floor mats. Never let a wrench or hammer slip out of place again with this genius way of organizing your garage.
Sadly, you can't really slow down time and dodge bullets like Neo. But the wall flip is one "Matrix"-style parkour trick you can do in real life. All it takes is a lot of practice... And the willingness to risk slipping up and landing in the hospital with a busted skull.
Cricket fielding drills with slip catching including advanced coaching and drills to improve your fielding. Check out all of The Cricket School videos on WonderHowTo for more great fielding, batting and bowling drills.
Learn how to tie a Surgeon's Knot - Symmetrical, Asymmetrical, and slipped - A knot similar to the reef knot but holds better on small round ropes (shoelaces!) then the reef knot and so I use it for tying my shoes. This is a fine knot for camping, climbing, sailing or Boy Scout training.
Learn how to tie a Constrictor Hitch - a great knot for tying a binding or bundle. It holds incredibly tightly and can be slipped for easy untying. This is a good knot for sailing, boating, general outdoors and even bondage.
Learn how to tie a Rolling Hitch - a useful knot for attaching a rope to a railing, post, or another rope where the pull is along the length of the fixed object. It isn't as good at resisting slipping as an Icicle Hitch, but it is a good deal quicker to tie. This is a good knot for sailing, boating, general outdoors and even bondage.
This is how to retrieve an item dropped down the drain. Did your ring slip down the sink? You can get it out with these handy plumbing tips designed to get your valuables out of the pipes without a problem or damage to the diamonds.
The Tucked Half Blood Knot is a normal half blood knot where the tag end is tucked in the final step. This will make the knot stronger and prevent it from slipping open. The tucked half blood Knot is used for the same applications as the ordinary half blood knot - to attach hooks, swivels and lures to the line. Watch this video fishing tutorial and learn how to tie a tucked half blood knot.
Handy tip, to release your car from slipping sand. Release tire pressure 40-50% to free car.
In this tutorial, we learn how to identify common knitting abbreviations. A yfwd is also known as a yarn forward. An sl 1 is also known as a slip 1 and a k1 is also known as a knit 1. A psso is a pass slipped stitch over and a k2tog is known as a knit 2 together. These are common abbreviations in knitting patterns, when you learn these you will be able to knit more quickly when you are reading a pattern that is written on text. After this, you can make any creation you want and read the direc...
No one likes getting their feet stuck in the mud. With this video, learn how to make your own pair of rain boots out of things you already have around the house. You will be dry while looking stylish and unique!
Wigs are generally made to resemble real hair, but that doesn't mean you should just tuck your hair up, slip one on, and go. To make a wig look natural, you have to play around with it a little bit.
Cake decorating wouldn't exist without a sturdy, delicious cake for all the decorations to go on. So before you roll out the fondant and slip some icing into a piping bag, check out this cake video to learn how to make the most delicious red velvet cake ever.
