Baking used to be a fun, relaxing hobby and a way to make treats for friends and family. These days, this hobby has become a creative battleground among out-of-work graphic designers with Pinterest accounts. People everywhere are now upping their baking game by adding interesting ingredients or daring designs. Presentation has become just as important as taste.
Love bangles? Even know what a bangle is? Well, it's a rigid bracelet or anklet, and can be made from metal, wood or other rigid surface. They're quite fashionable, and what's even more fashionable? -- homemade bangles!
What's a penny worth these days? Not much. But could there be some free energy hidden inside your spare pennies? You'd be surprised! See how I hack together stacks of pennies into makeshift batteries that can drive small-current devices like LEDs and calculators.
If you're painting your auto yourself, you might need a little help if you've never done it before, especially when it comes to the primer sealer and apply your first base coat of paint. This video will show you how to do just that. An OEM fender was already prepped by sanding with 500 grit sandpaper on a DA with a soft pad and surfing the edges with a maroon scuff pad.
In order to blank out and finish a drywall, you will need the following: a large putty knife and mud. You should begin at the top. Lay on a thin layer of mud. Put a little on your putty knife. Place your putty knife in the crevice, where the ceiling meets the wall and pull it down. Repeat. Do this, until you cover your working area. Then, go back over where you started and feather it. You will need to smooth it and even it out, without distressing the area that you did first. When you finish ...
As you know, it's impossible to be a Steampunk without a pair of goggles. In fact, there are entire communities dedicated to judging other Steampunks based solely on their goggles. A Steampunk without goggles is like Samson without his hair, or a duck without a beak—totally powerless. As I'm sure you also know, the right pair of goggles can instantly render any outfit Steampunk, no matter what it looks like.
1. Remove the old makeup and sealer. If you are working on a vinyl or resin doll, you can remove the makeup with a non-acetone nail polish remover. Afterward, wash the face well with soap and water. Work at any stubborn stains with a Mr. Clean Magic Eraser. 2. Sand the head, if necessary. Sometimes dolls will come with set-in stains that no stain remover can touch, or with scratches and gouges in the face. If your doll head is made of resin, in particular, do all your sanding underwater to pr...
If you're a big fan of home improvement, then you've you've probably painted a wall or item in your day. Not only can it get expensive, it's also time consuming, and very often just plain boring. Waiting for paint to dry so that you can add another coat is, well…like waiting for paint to dry.
How to make a wooden bench from reclaimed wood. Recycled wood projects, whether it's from pallet wood or old fence palings, the end result can be fantastic! In this video l am using reclaimed hardwood fence palings to build a rustic wooden bench seat. Rustic wood furniture has to be one of my favourites.
These three videos will show you how to build a rustic, distressed kitchen table. I'll be walking you through the process of selecting some recycled timber from a junk pile, and with a little care and some simple joinery techniques, transform that waste timber into a distressed timber kitchen or dining table. In fact, you could use the table for whatever you wanted really.
It's 2017—new year, same us. We vow to keep scouring the net for the best how-tos and feature the makers and doers who create mind-blowing projects.
Furniture gets beat up—it's a fact of life. Your beautiful tables will end up scratched, the legs of your chairs will grow nicked, and you'll find interesting dents and damage in other places around the house, too. Yet if most of your furniture is made of wood, you don't have to live with unsightly scratches. In fact, you can remove years of damage with a simple snack food: nuts.
When I was moving into my current apartment, I had to store some of my things in my ex-roommate's garage for over a month while I was getting settled. One of those things was my dresser. Upon moving it into my new place, I realized something was horribly, horribly wrong—none of the drawers seemed to fit quite right anymore (if they fit at all). The combination of the differences in temperature and humidity in the garage caused them to swell and change shape. Several months later, they fit bet...
I've always had an affinity for pretty wine bottles. When I was younger, my parents and my siblings would give me their empty wine bottles so I could collect them, and I loved every single one.
There may be no kitchen appliance as controversial as the garlic press. Professional kitchens and many avid cooks despise it, while others staunchly defend it.
Everybody loves the stars. Well, I certainly do. As a child I'd spend hours outside during summer nights marveling at the seemingly endless amount of sparkling dots spanning the sky. Maybe you have children of your own and want to create a sparkle in their eyes, or in your own. This tutorial will provide a basic method of bringing the stars inside—at least, in part.
This is a Q&A video with the question asking if glaze putty can be applied over primer or not. In this short Q&A video I am going to answer this question.
The Problem If you are working on a car restoration project, then you are going to faced with rust damage. This problem can’t be overlooked, as the entire project depends on repairing and eliminating rust. This would be like laying down new carpet to a house that was flooded, without cleaning the mess and making necessary repairs before laying the carpet down. The problem will still be there and the new carpet will be ruined.
How to patch a hole in drywall / plasterboard / Sheetrock. Everyone at some stage in their life will need to patch a hole in drywall / plasterboard / sheetrock. Instead of doing some dodgy patchwork, watch this video to see how simple the job is. The steps are as follow in point form. This method is particularly suitable for holes that are larger than about 100mm or 4 inch's in size.
I know, "Steamdown" conjures images of a hoedown, but "Steampunk prop breakdown" is a bit of a mouthful, I thought.
Say whatever you want, but Steampunk is primarily a maker culture. Consider that Steampunk has existed since the 1960s and yet more or less languished in obscurity until approximately 2005, which is when it made the leap to costuming. That costuming was what provided the leap to the tangible, despite the fact that Steampunk art had also existed for years.
In this video tutorial, viewers learn how to refurnish hardwood floors. Using a drum or belt sander, begin by cutting 36 grit abrasive. Then remove all the old finish marks and scratches from the main body of the floor. Using an edge sander, do the same thing. Now vacuum the floor and then repeat the process once again with both sanding machines, except use 50 grit abrasive this time. For the third time, use 80 grit abrasive and 100 grit abrasive for the fourth time. Remember to vacuum each t...
For furniture or wood projects, adding an aged wood look can give real character and interest to an otherwise ordinary object. With a little sanding, stain and lacquer to finish you can transform any wood object.
In this series of online videos you'll learn step-by-step instruction for building an artist easel for kids. Expert Jon Olson shows you what materials and supplies you'll need for this project, how to design the different parts of the easel, and how to fit them together, as well as tips for sanding and staining the wood. It's an easy weekend do-it-yourself project that will give your kids hours of creative time.
In this DIY project on video, learn how to drywall a new wall as part of a garage remodel. Our expert will explain what drywall is and how it works, with tips on how to prep the wall, calculate the amount of drywall you need, how to cut and hang drywall, mudding, sanding, taping and more. He’ll take you step-by-step through the process of creating a professional quality drywall that you can be proud of. Be sure to check out the series “How to Frame and Insulate a New Wall” to see how to insta...
This video demonstration shows the process of putting together a scrapbook layout page. Demonstrator Debbie's theme is "Being Grateful." While replicating this exact page might be difficult, watch this video scrapbooking tutorial to pick up some ideas for painting, inking, sanding, lettering, and generally decorating scrapbook layouts.
I have just finished making this 20 minute detailed video that shows you exactly how to build two different sized underwater viewers. One is 12" x 3" and the other is 24" x 4", but you can make them any size you like. These are ideal for gold prospecting, fishing (seeing what the fish are up to) and just for fun—kids love them. IMPORTANT NOTE:
I assume at this point you have already completed your control panel using Part 1 of this How To guide. Now, if you are anything like me, you couldn't fight the urge to play, and you have your panel sitting on saw horses in the living room.
Assuring A Proper Repair When Welding Vehicle Sheet Metal Any weld that is performed on a vehicle requires certain steps to assure a proper repair. For example, weld-through-primer must be applied to the welded surface being welded; corrosion protection must be applied to the back side of the welded area, etc. In this article we are going to discuss why fiberglass is required for auto body repair.
Installing Laminate Flooring on Stairs Laminate flooring can be installed on a flight of stairs, and this process can also be used when installing laminate on a floor and having to drop down a step to a sunken room.
Wood can be refinished by sanding off the old stain or paint but sanding runs the risk of removing fine details on the wood. Chemical strippers are the best to remove paint, varnish and shellac. Prepare the area on and around the project, strip, scrape and scrub. You might encounter some tricky situations like finding it hard to clean details on the wood. After project is stripped and cleaned, let it dry over night. It is time to refinish the wood. Bleach wood if needed, stain or leave natura...
I turned my first ear plug purely as a challenge when the question was asked on a turning forum and nobody could provide an answer. I didn't know much about them, only a general concept of the shape I was going after.
Stripping furniture or woodwork can be like a treasure hunt, revealing a beautiful wood surface beneath old paint and varnish. An old finish can be removed mechanically using a sander, but you run the risk of sanding off fine detail and contours in the woodwork. Chemical stripping enables you to soften the finish and then remove it with a scraper. Chemical stripper will remove most painted, shellacked or varnished finishes. For complete, step-by-step instructions for this DIY project, watch t...
Taping drywall is almost an art form. It takes practice and a lot of patience. A good taper can hide any mistakes that were made in hanging the drywall. To finish drywall, you must tack into place corner bead to all corners. Then, apply joint compound to all seams, nail and screw holes and corners. When joint compound dries – it shrinks. Therefore, 3 coats of compound will be needed with sanding in between coats. For complete, step-by-step instructions for this DIY project, watch this friendl...
Plaster walls, although popular homebuilding materials, are notoriously easy to damage. Door handles, elbows and moving furniture are all great at putting holes in plasterboard walls, holes which, thankfully, only take an hour or so to patch up. Stumped as to how to do it? Watch this video tutorial to learn how to repair these holes on your wall.
Staining wood is an exciting and fun step in your refinishing process. Staining brings out and enhances the patterns in the wood grain and it unifies an overall color. At this stage your project piece begins to look more finished. Allow enough time to complete this task from start to finish to ensure continuity of color. You have the choice of using either water or oil-based stain, and each offers advantages and disadvantages.
Gathering the materials is probably the most challenging part of the project, though it's great fun.
Would you like to create ghost flames or other custom paint effects, but don’t know how? Here is a quick, easy, and inexpensive method. This method does not require a paint gun, airbrush, or even paint. Follow this step-by-step procedure and watch the video tutorial and you’ll be able to do this to your own car. Best of all, if you don’t like it, I’ll even show you a method for removing it. All it takes to do this is 1/8 inch fine line tape, 3/4 masking tape, a piece of 3000 grit sandpaper, a...
This forum has a discussion about painting PVC that has some opinions from very accomplished people, including Volpin Props. They go over primers, adhesion promoters, sanding and more, and if you see these people's work, they are the go-to guys for informed ideas on this subject.
Middle-aged man shows how to hang a door properly. Very thorough explanation and subtitled steps makeup this informative video. The importance of sanding the door to fit properly are covered in this video. Hang a door properly on its hinges.
