This video tutorial will show you how you can build a rocket from trash. That's right... trash. To make the rocket, you'll need a paper towel roll (or three toilet paper rolls), a spray can cap, a model rocket engine, scrap cardboard or wood pieces, hot glue gun with glue, a straw and a paper cup.
Watch this video to learn how to build the plastic model rocket by Estes called the "Amazon". It's an easy to make rocket that is 36 inches tall and comes in the Tandem X Kit.
This is the launch pad that comes with Estes model rocket kits. Learn how to assemble with this easy instructional video. All you need is sandpaper!
A very easy to make rocket made from a drinking straw, and launched using air pressure. Almost everyone will be able to make this, it does not require any hard-to-find items, but also can it be made in very little time. Therefore the rockets themselves will be very easy to mass produce. They will fly HIGH up in the air, and then land on the ground, completely safe! Use this doc for reference.
Build a water rocket with bike parts. Make sure to fill your bottle with about 2 or 3 inches of water.
See how you can build a liquid fueled rocket with office supplies, mainly... a Sharpie magic marker and some duct tape. You'll also need some gas duster, the air cleaning can of gas. It's a pretty simple rocket to build, won't take long, and is loads of fun. Except, you'll need to keep buying canned air to propel it into the air multiple times.
Learn how to make a rocket using simple materials. Use sugar and KNO3.
This tutorial shows how to construct a mouth-launched air rocket. He begins with an ordinary strip of chewing gum. After removing the gun, he flattens out the wrapper. He then carefully wraps the long end of the wrapper around his index finger, leaving about half the wrapper protruding off the end of his finger. This creates a cylinder. Then he twists off the protruding end tightly and pulls it off his finger. To launch the projectile, he puts the rocket between his lips and blows. This desig...
Check out this video to see how to make the world's smallest fuel-free rocket that can fly 12 feet. Make it with just an empty bottle.
Place the neodymium magnets on the track and place four or five ball bearings in a line touching one side of the magnets. When you are ready to fire it, nudge the single ball bearing so it slowing rolls toward the magnets.
This instructable shows you how to easily make a pressurized rocket from some common household materials.
Real rockets require top ingenuity from physics and engineering experts, but you can construct a smaller replica that costs almost nothing can can be made from materials you already have at home or can find at a hardware store.
Lots of newbies ask about this. Don't know why, but okay, here's how to do it -- folding a parachute for a model rocket.
Curious about rockets? In this seven-part tutorial hosted by a science teacher, learn how to build your very own overhead water rocket launcher with simple tools you could find around town.
Have you ever wanted to launch your own rocket? Well, now you can, with little more than a two liter soda bottle, wire hangers, a bicycle pump and some PVC pipe Build a soda bottle water rocket.
Rockets can be made from things you can buy at any electronics store - like a can of compressed air. You can even buy your own kit, or assemble your own by following the instructions in this video. Once you've built the chassis, just insert a can of compressed air and let it ride!
Bottle rockets are tons of fun, and having some stockpiled at all times is a great way to make sure you are never unprepared for fun. If you are lucky enough to have such a stockpile, try this prank out! All you do is wait until your victim is showering, say a little bit of setup, and BAM! Their shower just got a lot more interesting/.
With this guide, you'll learn how to make a model rocket from a folded sheet of square paper using origami, the traditional art of Japanese paper folding. For more information, including a step-by-step overview of the folding process, as well as to get started making your own colorful paper rockets, watch this free origami lesson.
Take everyday sprinkler parts and form them into a high pressure rocket launcher that will shoot paper rockets nearly 300 feet!!! It's cheap to make and a lot of fun!
Convert the CO2 Cartridge Rifle into this awesome Cardboard Rocket Rifle! Shoots cardboard rockets 500 feet away!
Ever wondered what the inside of a burning rocket looks like? Well, thanks to Valve engineer Ben Krasnow, now we know. He built a homemade hybrid rocket engine that's see-through so you can actually watch how it works. And even though it's probably a really bad idea to try this at home, he made a video so you can build one, too. Just don't say I didn't warn you.
Rockets will always be cool no matter what age you are, and building your own rocket is even better. If you have an iPhone that you aren't afraid to blast off into the sky, then you can try and build your own iPhone Rocket to record and analyze flight data, like Byte Works did. The list of parts is a little hefty, but their blog provides you with all of the information you need to make sure you have everything. The most important thing you need is the sensor tag, so that you can record the am...
Get a couple of passed movies, the giant shopping cart and the giant rocket, make a few more of the giant rockets and strap them to the cart. then throw everyone in and launch them of a huge ramp of some sort.
This week, I've been working on a project that sort of takes a spin off an old-style potato gun. Using PVC pipe and the rapid combustion of hairspray, we can launch a rocket hundreds of feet into the sky. As usual for my projects, I tried to use only materials and parts that are commonly available. I even give two different forms of ignition, in case one method ends up being hard to come by. The following video will explain the project further: The launcher can be reloaded and fired repeatedl...
Rockets are lots of fun when you are launching them. However, finding them can be an arduous if not maddening task. Fancy space rockets have lots of tracking equipment to make touchdowns as simple as pie. Today, we look at embedding LEDs into your hobby rocket for easy night flight fun!
Hobby rockets are tons of fun. Vicarious astronaut adventures abound with every launch. What if you want to be closer to the action though? What if you want to feel what it's like to be in a rocket at takeoff? With the discovery of tiny keychain cameras, we have technology small and cheap enough to fit inside a model rocket!
If you're like me, you were always jealous of the kids with rich parents who got to ride around in their own Power Wheels cars. Now that I am tall enough to sell my body and time, I find myself attaining childhood dreams like buying my own Power Wheels car. I would not have chosen the Barbie Jeep given the choice, but 40 bucks on Craigslist is an amazing deal.
What we do is strap heavy duty bottle rockets to the cast's respective asses. Their pants will have padding of cource. We then stick them on skateboards and light the rockets and see how far they'll go. To make this more fun they dress up like whatever they want to. This should be funny due to the painful reactions from the cast when the rockets explode. Its not like the cast isn't used to things blowing up in there ass right?
Take a bunch of shopping carts and attach bottle rockets; this is just like what knoxville did when he did "rocket skates" in the 1st movie.
Jackass guys will play paintball with a twist weeman's pale skin would look fantastic covered in bruises1) They will be wearing no clothes, only facemask and underwear2) They will be riding pocket rockets (mini motorbikes) 3) Teams of 2 - each team connected by a 4m rope (this will hopefully makes things a lot harder)Last man standing (riding) winscheers guysjosh mckee
A hay wagon with some hay bales on it is rigged with several of same type of rocket Johnny Knoxville rode in JA2. The entire cast is onboard the wagon when the rockets are ignited, sending the wagon flying down a grass field.A second option is everyone ride a haywagon that is pulled by one of 2 completely opposite vehicles: 1. A Chevy Geo Metro, or 2. A fully loaded NASCAR stock race car, possibly driven by a woman, pulling the haywagon all around a grass field.A third option would be to have...
You can easily make an inexpensive silicone mold in your kitchen for cheap! This is a great project to do with your kids, or just for fun! You can also use this method to easily make theatrical props and prosthetics.
This extensive video series is all about making your own simple steam engine and boat, which is known variously as the "putt-putt" or "pop-pop" boat. Science Toy Maker gives the full details on making your own homemade steam engine model boat, which is similar to the one seen in the move "Ponyo".
This instructional video series is on how to build any type of 2/5th (40%) scale, fully functional tank. The specific model demonstrated is the M60 Patton. An MBT. A destructive force. If you have any questions about your backyard tank build, please address them to "Dave's Tank Foundry" at Scaled Tanks.
Okay, you've got all of your feed wires set up on your model railway track, now what? Ballasting. Check out this video tutorial to see how to ballast your model railroad track.
If you're at the point where you need to start ballasting your model railroad track, then you might want to check out this video tutorial on wiring. Learn how to wire your model railroad track.
Need to secure your track to the road bed for your model railroad? Well, this video tutorial will show you how to do it, not to mention show you how to weather your flex track.
Are your hobbies building model trains? Well, I hope you are building your own model sets the way you want to, but if you're stumped in the model railroading process, check out this nine-part video tutorial to see how to model railroad scenery using extruded foam. If you aren't into miniature rail transport systems, you will be now. Your landscape has to look good for your trains, doesn't it?
Watch this video series to learn how to make the base shell, terrain, trees, bushes, tufts of grass, and cast plaster rocks for a fantasy landscape diorama.
Upgrade the shocks on your RC vehicle to new aftermarket parts with this informative video. This video details how to install the Universal Shock Mounting kit with Proline Power Strokes. Tools needed for this install are a 5.5 driver and a 2.0 hex.