Reminiscence Foam Search Results

How To: Fix sticking power steering with Sea Foam Trans Tune

Is your power steering binding when you're trying to turn? Or maybe it turns real easy to the right, but extremely hard to turn to the left? Well, that's a classic sign of a power steering rack that has problems. But before you go out and buy an expensive rack and pinion, and take the whole front end of the car apart to replace it, you might want to try a little trick first— Sea Foam Trans Tune, which is also for hydraulic and power steering systems.

How To: Make a great chai latte

This video tutorial is going to show you how to make a great chai latte. Take four ounces of cold milk. Foam it up with a whisk. The volume more than doubles. It becomes ten ounces. Now put it in the microwave for about 30 seconds. You will know when it is done when it begins to expand even further. Remove it from the microwave, add one table spoon of sugar and stir it. Pour the milk into a slightly larger size mug. Get the tea ready and decant it into the mug. After the tea or chai is added ...

How To: Make simple small foam umbrellas with your kids

Small umbrellas are perfect for martinis and cocktails, but your kids don't have to know that. But this variation of the mini umbrellas aren't the kind you'd like to stick in your drink, but the kind your kids can have tons of fun with. They're cute, easy to make, and a fun afternoon of crafts with the kids. To see how to make these foam umbrellas, watch and learn. You'll need:

How To: Mount a fish finder on your kayak

In this Outdoor Recreation video tutorial you will learn how to mount a fish finder on your kayak. There are many ways of doing this. All the methods work. It’s just a matter of personal choice where you want to mount it. Some boats are designed for a through hole transducer and have a space for it to mount it in a hole. Take a piece of foam, trace out the transducer and cut out the foam. Now open the front hatch of the boat and glue down the foam on the flat surface of the boat. Once that ...

How To: Insulate garage doors with foam board insulation for a warmer winter

When it comes to winter weather, the garage should not be neglected, especially if you have a room directly above it. Neglecting to properly insulate and seal your garage doors will create a constant rush of cold air inside, making the garage really cold, in turn making the floor upstairs really cold. This will drive up your gas or electric bill in no time during the winter months. But you can fight higher heating costs with some DIY ingenuity, and Dave Mars will show you how!

How To: Make foam gaillardia amber wheel flowers with the kids

Gaillardia may be a foreign word to you, unless you're a botanist or flower enthusiast, but the gaillardia plant can be simply defined as a daisy. The American plant is usually cultivated for its bright red and yellow flowers, but it can also be the perfect craft project with the kids. This video will show you how you and your kids can make a foam amber wheel of gaillardias, which will surely please your young ones. To make this flower wheel, you'll need:

How To: Make a professional latte

Head Judge for the World Latte Art Championship, Paul Meikle-Janney, shows how to make a latte using the Brasilia Opus Sublima espresso coffee machine. Paul briefly explains that the process is somewhat similar to creating a cappuccino, noting that the major difference is how much foam you'll be creating on top of the beverage. This video shows the necessary steps taken to create the latte, creating the foaming texture and the single espresso at the same time. During this process, Paul offers...

How To: Make a creature puppet that bites and wags when held

If you're in the mood to make a horror movie, complete with creepy creatures and all, then you could make your dreams come true. Just check out this video tutorial on how to make a creature puppet that bites and wags when held. You can make this mechanism using string, craft wood, and hot glue, the action can be controlled with one finger, so the puppet appears to be alive when cradled in your arms. A nifty horror prop for a "pet monster."

How To: Make Ornate Frame 3D Layer Card

This is a great card, and built by creating the layers using one of the Ornate frames die, it looks amazing when it is finished and not to high that it won't fit in the envelope, as long as your 3D foam isn't the really thick foam. Step 1: Now Watch the Tutorial

How To: Preserve your Halloween Jack-O'-Lantern to keep it looking fresh

Carving Jack-O'-Lanterns is actually one of the safest parts of Halloween, despite the sharp knives involved. There are all kinds of techniques and styles, and this video will give you some great tips to help your pumpkin carving. It includes tips for keeping your pumpkin from getting mold and making it smell nice, and also advice on the use of foam pumpkins for those who want to eschew the mess of using the real thing.

How To: Make a fake tree for a play

Well it's time to put on the school play! This year, the school's going to put on Chekov's "The Cherry Tree". Only problem? You have no tree. Well, this helpful how to will guide you through the steps to make a light, portable tree that will turn your school play on its head.

How To: Upholster a full occasional chair

This is a demonstration of how to upholster full an occasion chair. First the seat upholster is removed carefully. The new cloth is cut accordingly to the shape. The edges are folded and stitched. The cloth is spread over the seat, tucked under the hand rest stretched to the bottom and nailed. For the hand rest a rectangular cloth of required color is cut. A piece of foam is spread over the hand rest and covered with the upholstery cloth and stapled at the sides and bottom. The back rest is r...

How To: Make Sailor Moon feather & pearl cosplay hair clips

This video is a demonstration of how to make Sailor Moon style hair clips. Start with two alligator clips, six half pearls, craft foam, glue, a pencil and scissors. Draw an outline of a feather shape on the craft foam and cut it out. Trace around the cut-out to make several more and cut them out. Spread some glue on the top of an alligator clip and stick the feathers shapes on in an overlapping design. Put some glue on the back of each half pearl and stick it to the clip at the base of each f...

How To: Make Ghee from unsalted butter

In this video Hetal and Anuja are demonstrating how Ghee (clarified Butter) can be made out of unsalted butter. Ghee is a very important ingredient in Indian cooking. Also, since its smoking point is higher than butter, it does not burn very fast as butter does. To make ghee you have to take unsalted butter and heat it in a heavy bottom pan on a low flame. Keep stirring it so that the milk solids do not get burnt at the bottom of the pan. After about 20 minutes the butter is completely melted...

How To: Make a 'Thor - Ragnarok' Costume That Will Rock Halloween

You can bet Thor costumes will be prominent among the superheroes seen this Oct. 31. Since the summer, there has been no shortage of coverage for Thor: Ragnarok, and the timing of its November release couldn't be better as a tie-in with the cosplaying holiday known as Halloween. This year, the success of pulling off the Thor costume will rely on how well your new Thor helmet looks, which as it happens, you can DIY at home, using a few simple supplies and perhaps a trip or two to the craft and...

How To: Do three fast upper-body warm-ups

In this video, we learn how to do three fast upper-body warm-ups. The first warm up is jumping rope for three minutes, then doing 30 seconds on a foam roller. After this, use the foam roller against a wall and then again on the ground, working both sides of your body. Now do 10 reps of push ups, followed by five kneeling reaches on both sides of the body. After this, you will use exercise bands to pull weights and do these on both arms. After doing this for as many reps possible, you will be ...

How To: Build a magnetic stirring device

In this video, we learn how to build a magnetic stirring device. First you will need: a block of 1 inch thick Styrofoam, a piece of cardboard, 2 magnets, a small electric motor, a piece of non-magnetic metal, a hot glue gun, and a soldering iron. First, draw the shape of your cardboard square on the foam and cut it out. After this, take your soldering iron and melt away the Styrofoam from the outside. Then, make a hole in the middle for where the motor will be placed and push it inside. After...

How To: Insulate an attic pull down

In this video, we learn how to insulate an attic pull down with Roy Honican. Doing this can help keep your home warmer and more energy efficient. First, measure around the top of the attic so you can build a box that will stand on top of it. To build the box, use foam board that is 1" thick. Cut the size to the sizes you just measured. After this, use foam tape to tape all the pieces together. Once you're done with this, you will have a large box and you will be ready to go back upstairs. Pla...

How To: Clean nubuck and suded leather like a pro

This video tutorial is in the Beauty & Style category which will show you how to clean Nubuck and Suede leather like a pro. For this you will need the Nubuck leather home care kit with eco protector. You will also need a couple of white terry towels and a hair dryer. Put a little bit of cleaner on the sponge and squeeze it till you get the foam. It is the bubbles that do all the work. Apply the foam all over the leather. Now take a clean, white terry towel and dab it over the leather to remov...