Pvc Innovation Search Results

How To: Make fake intestines

Gross out—and fake out—your friends by making some frighteningly, disgustingly real-looking intestines. Inspired by the Instructables project: http://www.instructables.com/id/Great-looking-disgusting-intestines-for-horror-f/

How To: Make and play a didgeridoo

This music tutorial video shows how to make a didgeridoo, an aboriginal instrument, out of a PVC pipe, beeswax, and other household materials. Making and playing your own didgeridoo will be easy with the instructions in this helpful how-to video.

How To: Easily build a rain barrel

A whole is drilled into the cap of a barrel with a 3 1/4 inch bit and another one an inch or more below the top and one of 3 inches width on the next side. Spreaded adapters ends are wrapped with plumbers tape; to prevent water leaks. The ends are then screwed together and placed into the top hole in the barrel. The spiget is held into the side hole with a piece of pvc pipe and a garden hose is attached. A funnel is made with a piece of window screen mesh slightly bigger than a pvc pipe it co...

How To: Use an electrical box extension

This is a video tutorial in the Home & Garden category where you are going to learn how to use an electrical box extension. Bob Schmidt shows how to use an electrical box extension during remodeling; when adding drywall, tile or wood over existing surfaces. For this you will need a PVC box extension which is designed to fit over the box that is already embedded in the wall. It extends out of the wall which will be covered by the layer of tile or drywall. Disconnect the power source to the plu...

How To: Make your own cheap camera dolly

In this video we learn how to make your own cheap camera dolly. First, place down two PVC pipes and place a board on top of that. Then, you can place the tripod on top of that. You can use this to take shots where the camera is sliding from one position to the next but you want to avoid shake from someone handling the camera. Make sure to glue wheels and a track to the board that you place on top of the pipe and it will travel along them more easily. Enjoy using this and have fun making diffe...

How To: Throw a football against the blitz

In this tutorial, we learn how to throw a football against the blitz. First, start with some extension drills. Do these by using a piece of PVC pipe held at shoulder level so the thrower keeps their shoulder over where the pipe is at. This will help the thrower feel the power of the triceps. In a normal throwing environment, the quarterback must follow through inside the left leg to prevent them from injury. The next drill is to help the player feel someone against them in a rush. To do this,...

How To: Install a dishwasher

In this video, we learn how to install a dishwasher. First, take out your directions from the package and throw away the rest of the packaging. Also, discard your old dishwasher if you don't need it. Next, attach the PVC hose to the water supply, making sure it's turned off, then connect the valve to the hose. Next, attach the outlet hose to the waste water pipe so the dirty water won't go back into the machine. This only takes around an hour and is a home project that you can do by yourself....

How To: Unclog a sink in the bathroom or kitchen

In this Home & Garden video tutorial you will learn how to unclog a sink in the bathroom or kitchen. It's extremely simple. Put a bowl under the U joint. Unscrew the plunger rod located under the sink and pull it out. Then remove the sink blocker and remove any dirt from inside the pipe. Now unscrew the PVC U joint at both ends and remove it. This can be done with your hands. Most of the time this part is clogged. Clean it up. Then clean up the pipe coming down from the sink. Look from top an...

How To: Modify a Nerf Nite Finder toy rifle

This is a video tutorial describing how to modify a nerf nite finder toy rifle. The first step is to take the nerf nite finder toy rifle out of the box and unscrew all of the screws on the gun. Then unscrew the light in the gun and then unscrew the back wiring and pry the metal out of the back. Next pull out the plunger tube assembly by unscrewing the two screws. Next add a pvc pipe to the connector piece from the gun, connect it to a piece of brass. Then add springs to your gun, and add a pi...

How To: Build a raised garden bed for sustainable living

Having a raised garden bed is great in the city because you can fill it with good soil and create a healthy environment for your plants. Install a hoop house made from PVC pipe. To build the raised bed, use 2x10x8 lumper. Predrill the holes at the corners to make it easier to assemble. Butt the ends together and use exterior deck screws to assemble it. If you want the raised bed higher, build another box the same size and stack them. Fasten a wire screen onto the underside of the frame to ke...

How To: Create a desert tortoise habitat

If you need to make a desert tortoise habitat you should be sure to do it properly since they are endangered animals. Desert tortoises like to eat plants because 90% of their diet should come from natural grasses. You should make sure they have dandelion, muellen and a bit of alfalfa. You can also feed them lettuce and make sure they get the right vitamins. You also need to make sure the soil is right for the desert tortoise. To build a habitat properly you need PVC pipes and slice these in h...

How To: Set up plumbing for a pond

The Pond Digger demonstrates how to set up plumbing for a pond. First, sleeve all pipes coming through the cement foundation to protect the plumbing from elemental stress and provide additional flexibility. Next, use a clear primer and a clear glue to seal areas where you need a clean, finished looking product. Paint the PVC piping to protect it from the sun's UV rays and prevent from becoming brittle. If you need to do cutting, use a chop saw for a quick, clean and efficient cut. Extend the ...

How To: Understand how a basement sump pump works

This video is from AskMeDIY and covers how basement sump pumps work to keep your basement dry. The sump pump fits underneath the basement below the concrete slab. The sump pump in the video pumps 2,000 gallons per hour. The presenter turns the pump off to demonstrate how quickly the water would fill in with the pump off. He contends that the basement would be flooded in only three minutes if the pump would malfunction. The pump is plugged into a GFI protected outlet and the pump outlet flows ...

How To: Make a potato gun/bazooka

Bill is in fact an expert in this field and refers to his book. He knows potato guns. So many small and not so small boys and girls would like to make a potato canon or bazooka. This is taken from the Backyard Ballistics book. Not only is this a fun activity, but it also teaches you about physics. You need some PVC pipe, glue, a hacksaw, and, of course, some potatoes! You also need an igniter and some hairspray. The potato fires out with some force and speed so adult supervision is required. ...

How To: Build a raised garden bed & hoop house

In this video you are taught how to build a raised garden bed and hoop house. You first begin with a layer of gravel and then place the layers on top of it. You can use leaves you can find to fertilize the soil. The video also teaches you how to build a hoop house using PVC pipes. This video is for urban gardeners or anyone who wants total control during the planting process of beautiful plants and flowers.

How To: Adapt a working bench into your RV hitch receiver

This RV tutorial video demonstrates how to create and adapt a traveling vice and working bench into your RV hitch receiver. You can also see how to strengthen the storage compartment support beneath the bed by using closet rod hangers and a PVC pipe, cut to size. Finally, for those occasions where you need to get under the rig, the video recommends to carry a lightweight camping pad and it will also double for exercising. Learn a few quick tips to improve life on the road in your RV with this...

How To: Simulate a gun shot wound special effect

Watch this short tutorial on how to make a realistic bullet hit to simulate an actor getting shot by a gun. Materials needed include a pressure sprayer, clear tubing that will fit on to the hose of the pressure sprayer, a small Translucent PVC elbow, fake blood, duct tape, a funnel, a shirt you don't mind damaging.