Purifying Bottle Search Results

How To: Bottle mead

In this tutorial, we learn how to bottle mead. When you are bottling mead there are a lot of things to take into consideration. You can use different styles of bottles that are clear so you can see what's inside of them. Use the #9 types of corks because they work very well with bottles and create a great seal. If you use a cheap one the cork will break off into the mead. Prepare the corks before mottling by placing them in boiling water and leaving it to steam for a few minutes. Use these ti...

How To: Make a silicone mold of a toy figurine

In this tutorial, we learn how to make a silicone mold of a toy figurine. First, roll out clay and press the bottom of the figurine into the center. Next, use a plastic bottle to create the mold box. Cut the bottom off of the bottle, then press the bottle into the clay to make sure the figurine is centered. Now, press the bottle down into the clay and make the silicone mixture. When you're done mixing, pour it into the bottle. Pour in a stream to avoid any bubbles inside of it. Let this sit o...

How To: Do chakra purification with mantra

In this tutorial, Dina Prioste shows us how to purify chakras with yoga. First, go into a gentle back bend while chanting a mantra. Then, lie on your back with your feet flat on the ground. Next, lift up your hips and place your fingers under your thighs and look up at the ceiling. When you do the chant, feel the vibrations through your body and remember to deep breathe while focusing intently. When finished chanting, lower your back down to the floor and relax the body. This will open up you...

How To: Make an awesome cup of coffee for cheap

Kelly Sutton shows How to make awsome coffee for five bucks. Coffee only needs two ingrediants to be good, purified water, and good coffee. Get a cup, coffee holder, and coffee filters. Grind your coffee right before you make your cup for the best flavor. Fold the filter and put it in the coffee holder, then put your coffee grounds in it. Now boil the water and let it cool off a bit. You want it to be around 180-190 degrees. Pour the water into the filter that has your coffee in it, and stir ...

How To: Practice food safety on a camping trip

Before you make that extended camping trek out into the wilderness, there are a few things any self-respecting camper should know how to do. And one of those things is how to safely feed oneself. With this free video guide, you'll learn how to practice food safety when roughing it in the wild.

How To: Locate water in a dry desert water bed

When trying to locate water in a dry desert look around to see if there are any disingenuous trees since these trees are usually near lakes and falls. Once you have located one find a low spot or a damp area near the tree. Using a stick or another tool available dig a hole into the area until you find water. Make sure to keep the edges of the hole your digging nice and round so that the hole won't fall in on it self. When you've found water it should flow into the hole. The water is usable so...

How To: Make a cloud, then make it disappear

This video features a really cool science experiment that is easy to do and fun to watch. Items you will need are a plastic 2-liter bottle with a sports bottle type cap (the kind you pull up on in order to sip liquids through the top), about a quarter of a cup of water and two matches. First, take the cap off the bottle and pour the water into the bottle before putting the cap back on the bottle. Then, simply open the pull top on the cap (so that when the bottle is squeezed and released air i...

How To: Breastfeed with a day-old baby

As Sarah Martin testifies to, breastfeeding can be difficult. Despite receiving lots of advice, after five unsuccessful days she decided she would not be able to breastfeed her son. Dr. Su Laurent suggests giving it two weeks before giving up on breastfeeding while making it clear that there is nothing wrong with bottle feeding. The breast bottle is introduced as a great alternative to mothers who want to breastfeed but cannot get the baby to latch. This bottle makes the baby work to get the ...

How To: Shoot unique product photography with long exposures

This video shows you how to light a bottle with long exposure in photography. The end result is to have a picture of a bottle with glowing edges with a black background. For starters you set your SLR camera settings to a 30 second manual shutter speed and a f5. 6 set aperture. Put the camera on a tripod for steadiness and set up your subject. For the subject, on a table, place your bottle in front of your chosen drop cloth. It is best to choose a color similar to the bottle. Then you use a li...

How To: Preserve Sooji for roasting

Anuja and Hetal from Show Me The Curry show how to roast Sooji. Sooji is otherwise known as semolina which is purified wheat used for making pasta. Semolina is known as Sooji in India and is used in many many dishes as a grain and sometimes as a meat substitute. Some recipes like Upma require that the Sooji be roasted before being added into the recipe. This video shows you the easiest way that you can roast Sooji in your microwave so that it can be used in various Indian dishes.

How To: Open a bottle of champagne

The trick is to pop the cork with style and flair—and without creating a dangerous projectile. You will need a cold bottle of champagne, a towel, a bucket of ice water, and salt (table or rock). Tip: To speed up the chilling process, ass cold water and a little salt. Watch this video to learn how to open a bottle of champagne.

How To: Put an egg in a bottle and retrieve it

Here is an inventive way to retrieve an egg once it has been magically placed into a bottle. Dazzle the audience with two magic tricks in one as you make an egg appear in a bottle and then magically make it appear outside of the bottle. This is a great two for one trick that takes only minutes.

How To: Lift fingerprints from a bottle of water with super glue

Does someone keep drinking part of water bottle and leaving them around your house or office, taunting you with their wastefulness? Thanks to forensic technology, it is possible to catch the culprit with easy household materials. This video will show you how to use super glue to lift fingerprints off of a water bottle where normal fingerprint-lifting technology would not be sufficient. Plus, you get to use a heat gun! Always fun.

How To: Make a lava lamp as a cool science experiment for kids

In this Family video tutorial you will learn how to make a lava lamp as a cool science experiment for kids. For this project you will need food coloring, water, vegetable oil and antacid pills. Take a bottle and fill quarter of the bottle with water. Fill up the rest of the space with oil. The water and oil will remain separate. Now drop food coloring in to the bottle. Each color will behave differently. For example, green settles at the bottom, yellow stays in the middle, red dissolves right...

How To: Recycle plastic bottles and make decorative flower art

In this tutorial, we learn how to recycle plastic bottles and make decorative flower art. Start out by cutting around the cap of the bottle until the body is cut off. Then, cut small slits in the bottle until it's completely cut up. From here, you will spread these out so they are opened up like petals. Take different colored plastic bottles and repeat this process. When you're finished, you will then attach these together using heat and use them as decorative art for your wall! This is great...

How To: Flatten a bottle cap in the Cuttlebug

In this video, we learn how to flatten a bottle cap in the Cuttlebug with Sara Sandberg. Before you do this, make sure you purchase bottle caps from a store, the ones from your home beer will not work with the Cuttlebug. Place your thick white A mat in the Cuttlebug, then place the bottle caps flat side down on top. Next, place a dye on top with the metal side down. After this, crank the lever and pull the papers through the machine. When you remove the top, your bottle caps will have flatten...

How To: Make a catfish jug rig

In order to make a catfish jug, you will need the following: an empty jug (or 20 oz. soda pop bottle), a1" PVC pipe, eyelet screws, a 6" piece of rebar, hot glue, swimming noodle, fishing line, a sinker, and a circle hook.

How To: Hack a Monster soda can to stash a beer bottle

In this tutorial, learn how to hack a can of Monster - or any large soda can - to stash a bottle. This is great if you are drinking a beer in public when you aren't allowed or if you'd just rather no one knew what kind of embarrassing beverage you are actually consuming. Follow along with the clip and learn exactly how to disassemble a simple can and use it as a cover for any bottle that will fit inside.

How To: Run a Windows app on a Mac OSX using Crossover

In this Computers & Programming video tutorial you will learn how to run a Windows app on a Mac OSX using Crossover. Search for the program, download and install it. Open the program, go to configure and then to manage bottles. Then click on the little ‘+’ button, name your bottle, select a version of windows and click ‘create’. This will take a few minutes to create the bottle. Now click on applications > install software. In the crossover software installer window, click on ‘insta...

How To: Make water bottle rocket with vinegar and baking soda

This video presentation is a tutorial of how to make a baking soda and vinegar rocket. Materials involved include a water bottle, vinegar, baking soda, toilet paper, and knife. First step is to use the knife to gouge a hole in the cap of the bottle. It should not be too large, and should be placed in the center of the cap. Once the hole is made, the cap is to be removed, and the bottle is to be filled partially to half-way with vinegar. After the vinegar is added, the baking soda is then laid...

How To: Cheat on any test with a soda bottle

This video teaches the secrets of cheating on any test with a soda bottle. You will need: a beverage bottle, glue, scissors. First remove the brand label from the beverage bottle. Now scan the label to your computer or take a picture of it and use it. With any photo editing software remove the nutrition facts from the label and replace it with your notes. Now print it horizontally by adjusting the page setup for the full label to be printed. Use a quality glossy paper for printing to make it ...

How To: Make a homemade fly trap

Do you have a problem with flies and you're not sure how to get rid of them? In this video, learn how to make a homemade fly trap to get rid of those pesky insects with wings! If you have too many flies buzzing around your house, here's a quick way to make an inexpensive fly trap.

Walkthrough The Saboteur: Act 1, M2: Bottle Shock

Champagne is great, rare champagne is even better in The Saboteur for the Xbox 360. Prove yourself and find the bottle in the second mission in Act 1: Bottle Shock. Luc needs antibiotics for his wounds. Luckily, Santos can provide them if you do him a favor. You'll need to steal back a bottle of champagne for him. Leave the new HQ and hop in a car. Now follow the GPS to the location of the champagne bottle. A pair of Gestapo agents will be guarding the front gate of the courtyard the bottle s...