Procedure Settle Search Results

How To: Draw blood with the butterfly method

If you are having a difficult time drawing a patients blood, you might want to considering doing the butterfly procedure. Watch this instructional medical how-to video to learn the proper way of drawing in blood with this method. The butterfly procedure involves drawing blood from the back of the hand. Start by placing a band around the wrist, palpating the back of the hand and identifying the direction of the veins.

How To: Make caramel custard

In this video, we learn how to make caramel custard. To make this, you will need: 10 eggs, 1 liter fresh milk, and 150 grams sugar. First grab your six eggs and take 6 yolks and 4 whole eggs, then mix your sugar with milk until it tastes how you like it. Now, mix the sugar and milk and eggs all together. Now make your caramel by heating up equal parts of sugar with equal parts of water and cook until it gets to a dark brown color. Pour the caramel into the bottom of separate trays when you ar...

How To: Build a proper drip irrigation system

This video illustrate us how to build a drip irrigation system. Here are the following steps: 1. To build a drip irrigation system you need a pipe, hydro cyclone, screen filter, Pressure building pump and micro filter.step 2: Connect the pipe to the water source and let it pass through the hydro cyclone to settle down all the sand. 3: Now from the hydro cyclone pass it through the pressure gauge for building up the pressure ant then this pipe passes through the network of horizontal and verti...

How To: properly mow your lawn and use different mowers

This video gives you several important do's and don'ts when it comes to mowing your lawn. It starts out by going through a couple different types of mowers, including a manual mower, which has blades on the bottom that are turned from the motion of pushing the mower. He then gives you a tip for how high to keep your grass. Make sure you only take off 1/3 of the length of the grass at a time or it will leave your grass very unhealthy. After you cut your grass, if you've only taken that third o...

How To: Make a Cricut "you're a winner" birthday card

Learn how to personalize birthday cards with this informative video! This tutorial will show you how in just a few steps, you can make a race car birthday card with the help of a simple pattern. Why go out and buy a card from the drugstore that looks like everyone else's when you can create something unique for your birthday boy? All you will need to make this fun card is some colorful card stock, the Cricut racer paper doll pattern, glue, and a little time. This video also shows you how you ...

How To: Make elemental sulfur (sulphur)

This video tutorial is in the Education category which will show you how to make elemental sulfur (sulphur). The chemicals you need are nitric acid and sodium thiosulphate. The reaction produces toxic SO2 gas so keep it coved with a watch glass. Put 12.9 grams of sodium thiosulphate in a beaker and dissolve it in minimum amount of water. Pour about 15ml of nitric acid in to the beaker. Let it sit in a warm place for a couple of hours and the sulphur will settle at the bottom of the beaker. Th...

How To: Use MIDI in Record

In this tutorial, we learn how to use MIDI in Record. First, automatically find your controller keyboard and set it up in your software. With this set up, create an ID8 instrument by clicking on the icon. Settle for a grand piano and record something to test it out. All clips are recorded and save mini notes, data, automation, and more. Clips can be moved, resized, duplicated, split, and joined through Record. These make up the arrangement and make the music. You can automate anything you wan...

How To: Set up a Weebly website

In this video, we learn how to set up a Weebly website. This can be used to build a complete site with multiple pages. First, go to Weebly and enter in your information under the sign up now text. Next, click the sign up button and enter in the Captcha phrase. After this, title your new site and continue on until you see the tabs at the top of the screen. Elements, designs, pages, and settings will all be listed. Go through the designs until you find one you like, then settle on that. Once yo...

How To: Use magnets to stick things to the roof of someone's car for a prank

The prank is one of the most cherished traditional forms of expression around the world, from Japan to the Middle East to the good ol' US of A. Without them, how would people settle their disputes with one another while having a good laugh at the same time? Every time a new phenomenon enters our lives, new pranks emerge that can be performed with it. We at Wonderhowto love pranks as much as anybody, and to that end we've scoured the internet for videos demonstrating the proper setup and execu...

How To: Style short hair in a classic Hollywood style

In this tutorial, we learn how to style short hair in a classic Hollywood style. To start this look, pin your hair up in different layers and start off with the very bottom layer. Next, heat up a barrel roller until it's hot. Next, grab a small piece of hair and place the barrel roller into it for several seconds until you feel the curl has settled in. After this, release your hair and spray hair spray into it. Your hair will come out with more of a crimp than a curl when you are finished, de...

How To: Install a BMW E46 M3 AFE Magnum Force Intake

Performing minor and major tweaks to your car can not only help it perform better, but look cool as well. Why settle with what you got at the dealership? Why not improve your car's overall value and in the same time add something that will make others jealous. In this tutorial, if you have a BMW E46, you'll be finding out how to install a M3 AFE magnum force intake for your car easily. So sit back, enjoy, and good luck!

How To: Plant an iris

This video shows how to plant an iris. Be sure to select a spot that gets about six inches of sun a day to plant an iris. When planting more than one iris, be sure to space them about a foot apart. This will encourage them to grow tall. When you dig the hole, don't dig it too deep. Also, make a little mound in the center of the hole. Spread the roots of the iris over the little mound so that the hole drains and the plant doesn't rot. You want about a third of your rysem sticking up out of the...

How To: Pan for gold in a lake

In this Outdoor Recreation video tutorial you will learn how to pan for gold in a lake. You will need the sand that you mined for gold. Put some sand in a pan, put water in the pan and mix it with your hands. Then stir the pan underwater. Loosen the sand with your fingers and keep stirring the pan. Gold being heavy, this will make the gold to settle down at the bottom of the pan and the dirt will remain on top. Then give the pan a good shake and tap it at the bottom. Now you pan the dirt out....

How To: Plant bulbs

Scott from Spring Hill Nursery with Step by Step Gardening talks about planting fall bulbs. Planting bulbs is very easy. You just need a shovel, good soil, and lots of water. The bulbs he plants are tulips bulbs, lily bulbs, glad corms, and iris rhizomes. All of these must be planted in the fall to bloom in the spring. It's easiest to dig one big hole - about 6-8" deep - and plant all of your bulbs at once. A random pattern yields a natural look. Once you've placed your bulbs, put about 2"-3"...

How To: Assemble a shock assembly on an RC vehicle

Squirrelod shows you how to put together a shock assembly or a shock absorber on a Factory Team remote control car kit. He takes us through building the piston - shaft, dampener, nuts and over rings step by step. Practical tips and tricks involved in building up the shaft and the recommended oil used are presented. This is not something that should be done in a hurry since time is needed to let the oil settle thus removing any air bubbles in the piston. Although the instructions for different...

How To: Control dog fleas with home remedies

This video illustrate us how to control dog fleas with home remedies. Here are the following steps.Step 1: First of all take some water and wash the dog with it.Step 2: Now take markotic powder and spread it on the dogs fur. If the fur hair is long then comb in the opposite direction for the powder to settle down. Leave it for some time.Step 3: You will find all the fleas on the surface of the fur.Step 4: Now dip a towel in water containing alum and sponge the dog with this towel .All the fle...

How To: Make a pumpkin spice martini

You need to have three kinds of ingredients – Vanilla vodka, pumpkin spice liquor, and Baileys. Find your martini shaker and fill half of it with ice. Add one ounce of vodka, one ounce of pumpkin spice liquor and one ounce of Baileys all in equal parts. You do not need to measure it exactly; you could just pour them into the shaker just approximately in equal parts. Put the cap on your shaker and shake until the outside of the shaker is frosty cold. Then pour the contents of the shaker into a...

How To: Make homemade cheese

Alexa from SustainablePantry demonstrates how to make homemade cheese in under 5 minutes. Pour 1/2 gallon of whole organic pasteurized milk in the pot. Heat it to a rolling boil over medium heat. Add plain distilled white vinegar. Stir frequently until you see the milk splitting into lump of curds. These curds are your homemade cheese. When the curds have settled, slowly pour the curdled milk into the colander with a cheese cloth. Drain off all the liquid until it become more and more cheese ...

How To: Practice saying the "t" sound in the middle of words

In words like bottle and mitten, the "t" really isn't a "t" sound; it is more of a "d" sound or a very fast "t" sound. Practice the "t" sound with the words button, carton, brighten, tighten, fatten, eaten, rotten, matter, butter, flutter, water, bottle, settle, and metal. In American English, the "t" sound is very difficult to hear in some words. An example of this is the word butter, where the "t" sounds more like a "d." Remember, the way people speak English in the United States is differe...

How To: Add mixed numbers with different denominators

This simple video tutorial teaches you how to add mixed numbers with uncommon denominators. It takes a step-by-step approach to the issue by first explaining how to separate the whole numbers into whole numbers and fractions, and then adding up those two groups of numbers separately. The video uses simple and easy calculations with audio instructions to illustrate the procedure. Lasting for only a little over a minute, the video manages to explain the procedure rather adequately.

How To: Adjust a front derailleur on a mountain bike

The video is about adjusting the front derailleur of a performance bike. To adjust the front derailleur you have to first adjust the rear derailleur to the smallest gear. To adjust the front derailleur shift the gear to the largest. If it does not slip into largest gear then adjust the barrel adjuster by turning it counter clockwise till it settles into the largest gear. Turn the barrel adjuster until it stops rubbing against the chain. The full process can be carried out whilst riding, it is...

How To: Make your own customized clock

Clocks are an essential part of your home, but you don't just have to settle for whatever clocks you can find at the store. Is this tutorial from Decor it Yourself, you'll learn how to make a funky timepiece that suits your style. Almost anything can be a clock, as long as you put a drill through it and stick it the wall!

How To: Discontinue an IV line in nursing

Studying to be a nurse? Then a very common procedure in nursing involves removing a saline lock or an IV line. This procedure is also called DC IV, or discontinue an IV. Follow along in this nursing how-to video to learn the proper protocol for discontinuing an IV line. Before DCing the IV always double check the doctor's orders and have your materials handy.

How To: Review casting and splinting basics

This medical how-to video reviews the basics of casting and splinting procedures. Follow along and learn how to splint and cast the wrist and forearm in case of a broken or fractured bone. A splints and casts can be placed in many different positions and aid in stabilizing injuries. Note that this medical procedure is intended for medical professionals.

How To: Splint the wrist and forearm

This first aid how-to video demonstrates how to perform a splinting procedure. Follow along and learn how to splint the wrist and forearm in case of an emergency. A splint can be placed in many different positions and aids in stabilizing injuries. Note that this splinting procedure is intended for medical professionals.

How To: Learn basic hemostatic technique in veterinary surgery

Some bleeding is to be expected from any procedure when even the most skilled veterinary surgeon performs an operation. Hemostasis is the physiological process of stopping the loss of blood, and a skill required of any veterinarian, from the most fundamental of procedures to advanced. This video animal surgery tutorial shows some basic hemostatic techniques for use in veterinary surgery.

How To: Perform basic suturing for veterinary procedures

This surgical how-to video shows several different basic techniques for veterinary suturing stitches. Various tools, such as forceps, grips, hand positions, and stitches are demonstrated. Learn how to comfortably and efficiently execute good suturing in veterinary procedures by watching this video animal surgery tutorial.

How To: Perform first aid CPR on an adult

Knowledge of first aid procedures can help save lives. Cardiopulmonary resuscitation (CPR) is a first aid emergency medical procedure for a victim of cardiac arrest and/or respiratory arrest. Watch this first aid video tutorial to learn how to do CPR to an adult casualty.

How To: Safely lockout electrical disconnects during repairs

This video aimed at electricians, is designed to help employers and employees what is required in the standard that is applied for the control of energy during maintenance and servicing of equipment and machinery. Employers are required by law to develop proper lockout safety procedures and provide proper protection materials and safety training. This video is highly important for any electrician, apprentice or journeyman, because it will help prevent injury… or even death.