How To: Fold an origami man in a hood firing a kamehameha wave
This is quite possibly the most awesome origami project we've ever seen, and trust us, we've seen A LOT of origami tutorials.
Never Before Seen Search Results
How To: Saw through your neck with floss like Criss Angel
In this tutorial, learn the secrets begind the mystery of Criss Angel's saw through the neck trick. You will learn how to take a piece of dental floss and make it look as though you are pentrating your neck straight through. At the end of the trick, pull the floss back out and there isn't even a scratch! Amazing!
How To: Build your own bird house
Give a bird a home with help from this handyman tutorial! Learn step-by-step how to build a professional looking Bluebird nesting box bird house. To build this nesting box you will need the following tools & materials: rough cedar or pine, a tape measure, pencil, speed square, hand saw, compound miter saw (if possible), exterior wood glue, drill bits, screw gun or drill, paddle bit, coarse thread drywall screws, deck screws, galanized finished nails, and a hammer.
How To: Create a basic scroll saw pattern in Corel Draw
This software tutorial is for scroll saw woodworking pattern creating beginners. If you haven't done much scroll saw work, or created any of your own patterns, this tutorial will show you how to make a basic scroll saw pattern in Corel Draw vector drawing software.
How To: Operate a reciprocating saw to cut wood
This Home & Garden how to video demonstrates the proper operation and use of the reciprocating saw. Remodeling your home doesn't have to be such a daunting task. Make sure to get a high amp reciprocating saw to cut your time in half. Cut pipes, wood, and things that are hard to reach with a typical round saw.
How To: Use a water diamond blade tile saw to cut tiles
Remodeling a home can be a daunting task if you don't know how to properly use equipment. This Home & Garden how to video demonstrates the proper operation of the tile saw (wet saw) for cutting tile. Cutting tiles with a water saw doesn't have to be so difficult anymore.
How To: Use a table saw to cut long pieces of lumber
The table saw is the most efficient way to cut long pieces of wood. This Home & Garden how to video demonstrates the proper operation and use of a table saw for cutting wood. Use these table saw tips next time you are working on a home project.
How To: Use a hole saw
Tim Carter demonstrates how to use hole saws. These tools drill perfectly round holes from one-half-inch diameter up to 2 and 1/4-inch diameter using your standard drill.
How To: Use a table saw the right way
Tim Carter shows how to use a table saw and explains its benefits at a project site. Tim's table saw has wheels on it showing the portability of the table saw.
How To: Draw Figma Black Gold Saw from Black Rock Shooter
How to draw Figma Black Gold Saw from Black Rock Shooter From the anime "Black Rock Shooter" comes a figma of the mysterious ''Black Gold Saw', who was seen fighting with Black Rock Shooter at the very beginning of the movie. Have fun creating your own version of Anime Guys! Looking forward to see yours! For the full tutorial with step by step & speed control visit: how to draw.
How To: Build a table saw crosscut and miter sled
Check out this woodworking video from Eagle Lake Woodworking. Learn how to build a table saw crosscut and miter sled by watching this five-part series.
How To: Make an easy back flipping origami frog for beginners
We've all seen origami frogs, as they are typically some of the easiest animals to make in origami. We've even seen jumping origami frogs that leap forward when you press down on the frog's back. But we bet you've never seen an origami frog that can do backflips.
How To: Play "Has Anybody Seen My Gal" on the ukulele
Want to play "Has Anybody Seen My Gal" on your ukulele? Learn how with this free video ukulele lesson from Ukulele Mike. Whether you play the ukulele or bass kazoo, there is no better way to improve your chops than by learning to play your favorite songs. Not only is it more fun and much easier than running drills or memorizing a chord book by wrote, it's obviously also a wonderful way to build your repertory of songs. For more information, and to get started playing "Has Anybody Seen My Gal"...
How To: Split or cut concrete landscape blocks
This video describes the process of split and cutting concrete blocks. For splitting concrete blocks, a hammer as well as a chisel are required. For cutting concrete blocks, you can either use a skill saw with a masonry blade or a masonry saw. Next, proper safety guidelines and equipment are discussed. For splitting masonry blocks, two types of blocks that are manufactured with splitting notches are shown. To split these blocks, they must be scored with the chisel along the entire length of t...
How To: Play the Beatles' "I've Just Seen a Face" on ukulele
Want to play "I've Just Seen a Face" by Paul McCartney of the Beatles on the ukulele? Learn how with this free video ukulele lesson from Ukulele Mike. Whether you play the ukulele or bass kazoo, there is no better way to improve your chops than by learning to play your favorite songs. Not only is it more fun and much easier than running drills or memorizing a chord book by wrote, it's obviously also a wonderful way to build your repertory of songs. For more information, and to get started pla...
How To: Use the Corel Draw bezier tool for scroll saw patterns
The bezier tool in Corel Draw allows you to create a certain type of curve. In this tutorial you will learn how to work with and control the bezier tool in Corel Draw as you create scroll saw patterns.
How To: Use the interactive contour tool in Corel Draw X3
This Corel Draw X3 vector graphics drawing software tutorial shows you how to use the interactive contour tool. Learn how to use the interactive contour tool in Corel Draw X3 to create scroll saw patterns for your scroll saw woodworking projects.
How To: Move and position objects in Corel Draw X3
In this Corel Draw tutorial you will learn how to move and position objects in Corel Draw X3 to help create scroll saw patterns. If you create scroll saw woodwork and are into making your own patterns, this Corel Draw X3 tutorial will help you move and position objects.
How To: Trace clip art with Corel Draw X3
In this scroll saw pattern making tutorial you will learn how to use the drawing software Corel Draw X3 to turn clip art into patterns. Learn how to trace the clip art in Corel Draw X3 and turn it into scroll saw patterns.
How To: Build a camera jib crane
In this DIY video, we show you how we built our camera crane. This was all done with a table saw, drill and hack saw.
How To: Use the Saw Stop table saw for woodworking safely
Watch Al, Bobby, and Tommy discuss (with big words) some table saw safety tips and demo the Saw Stop table saw. Tommy breaks down the process of setting the saw up, engaging the safety systems, firing the blade break and resetting the saw.
How To: Make cheap moving dragon wings controlled by the body
Check out this video tutorial on how to make cheap dragon wings, controlled by body posture. You can do this project for $18 if you use plastic garbage bags and Scotch tape for the membranes. You'll see how to make very light and strong costume wings. How strong? That strong.
How To: Use a jigsaw with Lowe's
In this tutorial, we learn how to use a jigsaw. First, measure and mark the size of the circle you need to cut. You can use a compass or trace around a round object. Now, place your wood off of a table and clamp it into a place. Now, drill a starter hold inside the circle and put on your protective glasses. Now, place the saw in the starter hole and saw half way up, or to where you feel comfortable. After this, reposition yourself, then continue on. Make sure you don't force the saw, just let...
How To: Use a circular saw and miter box with Lowe's
Lowe's teaches how to Use a Circular Saw and a Miter Box. You'll need to learn how to use a circular saw for this approach Learn how to guide the blade to make smooth cuts in your wood. You will also learn how to use a miter box to cut small wood pieces easily. Once you have mastered your wood cutting techniques you'll be able to put together some crafts at your home. This video help you to simplify projects around the home.
How To: Build a looping rolling marble machine with magnetic elevator
Wow! No longer do you have to buy those huge marble machine roller coaster toys — you can DIY one! This video covers the materials, tools and techniques used to make a homemade rolling ball marble machine. If you haven't seen this rolling ball marble machine toy in action yet, WATCH IT. It's a looping rolling marble machine made with wood, rebar tie wire and polyurethane tubing, featuring a magnetic elevator.
How To: Make a cheap lock pick set from saw blades
It's time to pick a few locks, but with what? Check out this video tutorial to see how to make a cheap lock pick set from saw blades. You can make any lock pick you want with saw blades, a little grinding, a little more grinding, and yes... grind, with a few finishing touches.
How To: Use a circular saw to cut plywood
Watch this video to learn how to use a circular saw to cut ply wood. Do it the right way, without wasting material. The more teeth your saw has, the finer cut you will have.
How To: Use hand saw tips
One rusty old traditional hand saw can sideline any beginner. Just say no to exasperation. Get the winning saw.
How To: Use a table saw
Tim Carter discusses the many uses of table saws and shares some table saw tips. Watch this video to learn about how a table saw can help you rip lumber and make difficult cuts.
How To: Easily remove pressed-on bearings
If you're having a hard time removing pressed-on bearings on a certain part of your car, have you tried using a saw? It may sound a bit unorthodox, but in this next tutorial, you'll find out how you can easily remove pressed-on bearings using nothing more than a saw. It's easy to follow, but can be dangerous for those who are unexperienced. So check out the video to find out more and good luck!
How To: Use a holesaw
Looking for an easy way to cut out a large hole from a plank of wood or a sheet of plastic or metal? A holesaw (also styled hole saw) might be just the right tool for the job. For a complete overview of how to use a holesaw-type circular saw to carve holes into your materials, watch this free video handyman's how-to.
How To: Stabilize your table saw
Shopsmith Academy shows you stabilize your table saw. Some projects may require precision down to a few thousandths of an inch. This video shows you how to accomplish very exact measurements. Apply this lesson to your next woodworking project. Search Shopsmith Academy on WonderHowTo for more woodworking videos.
How To: Learn the Arabic letters ra, zay, seen and sheen
This lesson is part of a series of video language classes which will build a solid foundation for learning how to speak Arabic. The instructor in these instructional videos is a native Arabic speaker who started making his own teaching tutorials in an effort to demonstrate clearly how the language is really spoken back in his home in the Middle East. In this video segment, the instructor will teach the letters ra, zay, seen, and sheen in Arabic.
How To: Use a wet saw to cut tile
This how to video is brought to you by Handy Magazine. The Handyman Club of American provides reviews and how to's on a variety of home & garden project. This video covers what you need to know to use a wet saw to cut tile.
How To: Start fires with bamboo Army style in Afghanistan
Operation fire-saw. The British Army use tips from Bushcraft & Survival Skills Magazine to boost morale in Afghanistan and to practise their firelighting skills using an article written by firelighting expert Dave Watson.
How To: Create portrait scroll saw patterns in Corel Draw
In this Corel Draw software tutorial you will learn how to draw portrait patterns to be used in your scroll saw woodworking. In this tutorial you will not have to draw portraits from scratch but convert photos into patterns within Corel Draw.
How To: Cut a circle on a table saw
Watch this video to learn how to cut a circle on a table saw. The idea behind this technique is to create a pivot point for the piece of wood.
How To: Position crown molding in a miter saw for perfect cuts
Tim Carter, of AsktheBuilder, demonstrates how to position crown molding in a miter saw for perfect cuts every time.
How To: Use a miter saw
The mighty miter saw manual! Learn how to make straight cuts, bevel cuts and angle cuts, along with safety tips from OodleboxTV power tool diva Jackie Taylor.
How To: Use a table saw with Skil & Lowe's
In this video we learn how to use a table saw with Skil & Lowe's. The rip cut and the cross cut are two cuts that are most useful. A rip cut goes with the grain of the board to cut it to width. The cross cut goes against the grain and cuts it to length. First, position the board next to the blade and then raise the blade. The blade should be just above where the board is at. Slide the rip ends over to the dimensions you want and then lock it down. Put your safety glasses on, then turn on the ...