Flooring Search Results

How To: Prep plywood subfloor for hardwood & laminate with Lowe's

In this tutorial, we learn how to prep plywood subfloor for hardwood and laminate with Lowe's. Before you prep your floor, read the manufacturers direction and information on the flooring. After this, gather all of your materials and tools you need to complete the job. Then, measure out the floor to figure out how much material you will need. Take off all the carpet and base boards from the room, then clean off the floor from dirt or dust. When finished, cover the subfloor with the right type...

How To: Install laminate floors in your home with Lowe's

Lowe's home improvement expert Mike Kraft is back again to show to help us install laminate wood flooring in our homes. It has been assumed that proper sub-floor preparation has been done. All the tools, equipment, and materials are gone over in detail for your safety. Proper tests for moisture are described which is very important when dealing with concrete. Laminate floors are called "floating floors" because they are not physically joined to the sub-floor and can be installed over many dif...

How To: Tile a kitchen floor with a border

In this video, we learn how to tile a kitchen floor with a border. First, you need to remove the flooring that is currently on the ground and sweep it clean. After this, lay down the paste and then the filling for the middle of it on top of the paste. Make sure this is pressed down firmly, then lay down the white paste on top of it. From here, you will be able to la down the tiles in a pattern that will make all of them line up together. Place the border around the sides and you will be finis...

How To: Remove carpet to install concrete floors

Bob Harris of decorative concrete institute explains how you can remove your tiled or carpeted flooring for a concrete substitute. He suggests when your removing carpeting that it can be very heavy and advises you to hire someone who can lift and carry it out, or rent a dumpster for easy take away. He states that after the carpet is removed you'll need to remove the adhesive from the floor. You can do this by stripping or grinding, and at other times the use of harsh chemicals may be needed. ...

How To: Put laminate floors in your home

This video demonstrates how to laminate floors into your home. In this case, this is an episode from HGTV which is a home improvement show with the motto of "Start at Home." The laminated floors in this video are click and lock floors. First you would clean out the floor, install flooring and then cut the pieces to fit. If you follow the steps slowly in this video, you'll be able to laminate the floors. Some basic carpentry skills are needed for this task.

How To: Easily Replace a Damaged Laminate Floor Plank

Laminate floor planks look beautiful and add elegance to a home. However, if a plank gets damaged, it detracts from the beauty of the flooring. Do you call in a professional and pay tons of money to replace the plank? Thankfully, no. There actually is an easy way to replace a damaged laminate plank if you are ready to spend some time and have a little bit of patience.

How To: Sand a hardwood floor

Aba Wood Flooring demonstrates how to sand between coats when working with water-based finishes on hardwood floors. When you use an electric sander, avoid overheating the surface when sanding between coats of a water-based finish. Accomplish this by replacing conventional sand screen pads with a Velcro triple head sanding plate and soft interface pads. The triple head sanding plate and interface pads offer better dust extraction and a more effective final sanding. This system also offers bett...

How To: Install flooring in your basement

In this series of video clips you’ll learn how to install new flooring in your basement, including tips on how to prepare your existing basement floor for the installation process, the equipment and supplies you’ll need to install your new floor, and the various flooring options available. Our expert will demonstrate how to spread adhesive and apply vinyl flooring evenly, how to mix mud and apply grout for ceramic flooring, and measure and set ceramic tile correctly. Watch these free video cl...

How To: Install hardwood floor on concrete

This video shows you how to install a hardwood floor over concrete. You will need a plywood base. This video demonstrates the nail down method. You will need 15 nails per 8 feet by 4 feet sheet; plan according. The entire process is very easy and gives you easy steps to follow. The demonstrator gives some good pointers that might help you avoid any serious mistakes. The flooring installed will be suitable for solid flooring or multiply engineered flooring with a heavy wear layer. This is a ve...

How To: Easily set a ceramic tile floor in your bathroom

If you have an old bathroom with vinyl flooring installed, it may be time to upgrade your floors. Although vinyl is sturdy, it can look cheap and possibly bring down the value of your home. This tutorial will give you the advice needed to replace your old bathroom floor with new ceramic tile that looks much better than your old flooring. Good luck and enjoy! Easily set a ceramic tile floor in your bathroom.

How To: Install a tongue and groove floor

There are fewer things finer in a home than a hardwood flooring. For the do-it-yourselfer, however, it can be a fun, yet daunting task. Installing a hardwood floor can best be described as a combination of rough and fine carpentry. Pounding the nails home and bending warped flooring to fit is certainly rough work. However, it is detailed as well, because even small mistakes will show.

How To: Install laminate floor under a door

In this tutorial, we learn how to install laminate floor under a door. First, take your floor and pop it into place like you do for the entire floor. Then, take a piece of scrap and place on the end. After this, grab a tool and push it into the door with a hammer until it reaches underneath the door. Once you have this finished, it will give you a nice and clean look on your floor. Make sure you don't miss with the hammer and hit the flooring, so you don't cause cracks in it at all. To finish...

How To: Make linoleum asphalt mosaics with Craftzine

Linoleum asphalt mosaics, also called Toynbee Tiles, are artworks permanently embedded in pavement. In this video I'll show you how to construct your own from inexpensive materials. You can get real linoleum (don't use vinyl flooring) for this project by ordering free samples online. By cutting out a mosaic design in the linoleum and sandwiching it between layers of paper, wood glue, and asphalt crack filler, you can affix the mosaic very permanently to an asphalt surface, such as your drivew...

How To: Spin on your head

The next time you hit a dance floor, show that crowd what you're made of with an impressive head spin! Head spins are dance moves that should be done under the supervision of an instructor, and a beanie or skull cap should be worn to avoid injury. Discover why wood flooring is the best for head spins with help from these two experts. Bliss & Zetta are professional hip-hop dancers and choreographers. Learn more dance moves from these two by searching WonderHowTo! You're only practice time away...

How To: Update your kitchen for cheap

This quick informational tutorial, gives you some tips for transforming your old kitchen into something new and improved. You'll find out how different lighting can help create a better mood for the area, how certain faucets can be used to wash dishes and fruits and veggies, as well as find the right kind of flooring of countertop. So check it out and see if you agree with The Home Depot. Enjoy!

How To: Replace and install an exterior door with Lowe's

To replace a door, refer to Lowe's do-it-yourself for a step by step guide. Replacement is not very difficult. To replace just the door, tools and material required are: a new door, hammer, screw driver, tape measure, pencil, combination square, saw horses, clamps, chisel, a door lock installation kit, a drill with bits, circular saw, level, work gloves, dust mask, safety glasses, plane, shims, cardboard, and a utility knife. Before removing the old door, take a few measurements like the widt...

How To: Design a safe kitchen

Home accidents. It's up to you to protect your family… your children… from accidents in the home. And there's one place that seems to get the most attention when dealing with safety concerns… The kitchen is one of the busiest, most accident-prone rooms in the house. Design a kitchen that will keep your family and guests safe.

How To: Install ceramic tile in your home

Installing ceramic tiles to your house is an easy way to add character. Many tiles come in a beautiful earthy pattern that looks great in kitchens and bathrooms. In this tutorial, you'll find out how you can add this great flooring to your home today. So check it out and good luck!

How To: Use color, texture & style in your home

In this tutorial, we learn how to use color, texture, and style in your home. When choosing a paint color for your walls, first make sure the color is something you don't mind seeing everyday. After this, choose furniture that has different textures on it. Use a combination of different flooring materials to create contrast in each of the rooms. Use plants and paintings for decoration, but have them in popping colors to make the room come together. Use area rugs on floors, this can bring the ...