Clean Cast Iron Search Results

How To: Wax a snowboard properly

In this video tutorial, viewers learn how to wax a snowboard. The materials required for waxing are: wax (cold, medium or warm temperature), scraper, brush, iron, wax paper, cloth and gloves. Begin by wiping the board with the cloth. Now rub the wax on the board. Then hold the wax against the iron to melt it, and then rub it on the board. The press the iron on some wax paper and spread it across the board. Leave it too cool for about 20-30 minutes. Then use the scrape to remove the wax layer....

How To: Solder electronics the right way

New to soldering? This how-to video answers the questions for these common beginner soldering questions: what is flux? what tip should be used? do solder fumes contain dangerous amounts of lead? why regularly clean and tin the iron tip? Watch this video computer-circuitry tutorial and learn how to solder correctly.

How To: Clean a stain in your washing machine

This video shows how to clean a stained washing machine. Stains are typically caused by brown dirty water in the washing machine. Water is usually brown because it contains high levels of iron. The narrator demonstrates a product called CLR, which can be purchased at Home Depot. It is a product designed to remove iron and lime. He shows how to apply a small amount of the product with a sponge to the inside tub of the machine. He advises to let it soak for about 5 minutes. He then wipes the in...

News: Will JB Weld Repair a Cracked Engine Block?

I went to get my boat ready for the summer and discover that my engine block was cracked. I looked online to find the cost of a new block to be way out of my range so I decided to see if I could repair the cracked block. Cast iron is very sensitive to heat and I do not have the skills to weld cast iron. So I decided to see if JB Weld would repair the block or not. To discover if it worked or not, watch the video below.

How to Walkthrough Darksiders: Journey to the Iron Canopy

To get out from the Soul Bridge in the Ashland of Darksiders on the Xbox 360, you should watch this video to make sure you do it without getting killed. Make your way up the western rocky ramp and head due west to find the Soul Bridge. Approach it riding Ruin and you'll be able to cross the long gap via a bridge made of souls. Ride Ruin through this long tunnel to enter the Iron Canopy at the far end. For more info, watch the whole gameplay.

How to Walkthrough Darksiders: Iron Canopy

In the Xbox 360 game Darksiders, you'll eventually have to play the Iron Canopy level, which consists of The Seesaw, Webbed Floor, Two Lifts 1 Bomb, Loom Wardens, Broodmother, Silitha and Return Silitha's Heart. War will be ambushed and captured as he enters the Iron Canopy. When he comes to, you'll find him hanging from a spider web. Tap the Action button to break free. Make your way around to the left to discover a Soul Chest in hidden nook behind your starting location. Now cross the webbe...

How To: Make a homestyle spaghetti with meat sauce

If you are looking for a slightly healthier, and homier, way to make spaghetti with a classic meat sauce then you've come to the right place! In this video you will learn how to make a fantastic home style spaghetti meat sauce with a pinch of love from grandma. And the best part is: she is doing it all in a cast iron skillet!

How To: Mass cast complex parts with a parting line

Check out this detailed video that covers how to mass cast an object with no flat sides. This video is only for very experienced mold makers or the particularly ambitious. When mass casting a part without a flat side, you must create a two-part mold. We create a two-part silicone rubber mold with a clean parting line and then cast the part with Repro. This process can be used in automotive, mechanical, fine art and film special effects uses.

How To: Iron trousers

This video will teach you how to iron your trousers or dress pants so you look your best. Also learn how to iron in a crease! You will need a steam iron, an ironing board, a spray bottle with water, and of course a clean pair of pants. Remove the wrinkles and get a more professional, put-together look. Iron trousers.

How To: Get candle wax out of your carpet

Want to remove dried wax from a carpet? You'll need four items: a white towel, a regular electric iron, a carpet cleaning solution and a hot-water extraction machine. For a complete, step-by-step demonstration of how to remove pesky paraffin wax stains from your own carpet, watch this free housekeeping video tutorial.

How To: Stencil a t-shirt with inks

This video shows you how to stencil a t-shirt with inks. Tape the t-shirt onto a piece of cardboard with masking tape. Lay the stencil on the t-shirt and tape some blank paper at the edges to ensure that there is no splashing on the sides. Some mist paint in blue Hawaiian is used. You do not need to apply a lot of it. Add some orange paint too. To make the print permanent, you must take out the cardboard put the t-shirt on the ironing board with the design uppermost. Cover the design with a c...

How To: Solder a wire

This video describes how to solder a wire. The first thing you have to remember is that the wires should be cleaned, shiny, and bright. Then trim about 1/2-inch of the insulation of the wires and then make a secure mechanical connection. Next, put some soldering pencil clean and shiny 60/40 rosin core solder. Do not use 50/50 core solder. Start by making sure that the soldering iron is tint. Put the soldering iron underneath the joint. Heat tends to rise and then touch the solder to the joint...

How To: Get big bouncy curls like Kim Kardashian

In this tutorial, we learn how to get big bouncy curls like Kim Kardashian. First, have straight and clean hair and heat up a 1.5" curling iron. Now, section your hair off and start with the bottom half. Wrap your hair around the curling iron, then after 15 seconds release the hair and spray with hair spray. Now, curl the next piece of hair facing the opposite direction. Continue to curl your hair all the way around until you have reached all the way around. Now, loosen the curls by brushing ...

How To: Clean and used dried chiles

In this video from Gourmet Magazine, Ian Knauer shows us how to clean and use dried chilies. Chile de arbol is the spiciest. To make a great hot sauce, boil about 40 of these with the seeds in and blend with some garlic and water. Next is the chipotle chili. You can often find these in a can but they are more potent when fresh. The larger the chili, the less heat it contains. An ancho is like a poblano. A guajillo is often paired with an ancho in a recipe or an adobo sauce because they comple...

How To: Get voluminous Mariah Carey hair

Get hair like Mariah Carey's with these simple steps. Start with clean dry hair, BioSilk, two-inch curling iron, and a hair straightener tool. Add BioSilk to hair and dry to protect hair. Starting at the top, and working in sections, lightly tease hair at the base and curl hair to the back, or down for the sides of the head. Each section takes only a few seconds on the curling iron. Once done over the entire head, use the straightener and pull curl through. Fluff hair and done!

How To: Make no knead bread

Watch this video to learn how to make no-knead bread. In a large mixing bowl, dissolve yeast into water. Stir in flour and salt (dough will be sticky). Cover with plastic wrap and let sit in warm place for a minimum of 8 hours at room temperature (approximately 70 degrees). Ten to twelve hours may be necessary, so letting it sit over night is a good idea, provided there aren't any dogs that will jump on the counter! The dough will be ready when the surface is covered with bubbles. Lightly flo...

How To: Iron a men's button up shirt

This Home and Garden video tutorial shows how to iron a men's button up shirt. This video will show you how to iron a cotton shirt. Switch on your iron and set it to the hottest setting or cotton setting. Place the shirt on an ironing board and start with the collar. Iron both sides of the collar. Now get on to the sleeves; first iron both sides of the calf and then the whole sleeve. Repeat the other sleeve. Then iron the front of the shirt; pull the fabric slightly to even out the creases, i...

How To: Solder wires

Soldering properly is a skill every electronics and computer hobbyist needs. Proper soldering appears deceptively simple, but it requires practice. One has to do the steps below to solder the wires which is as follows, First Clean the area you wish to solder and scrape the wire down to the metal and then wiping it clean with alcohol or acetone. Then you want to use a rosin-core solder for electronic applications, which comes normally with coils. Tin the tip of the first Wrap one or two inches...

How To: Use a pressure washer to clean outdoor furniture

Outdoor furniture is made of a lot of different things: Wood, iron, aluminum, even plastic. Dust, dirt, mold, mildew and moss on your outdoor furniture can be cleaned off almost immediately with a pressure washer. Watch this how-to video and learn to use a pressure washer to clean your outdoor garden furniture. Use a pressure washer to clean outdoor furniture.

How To: 9 Unconventional Uses for Paper Towels

Paper towels are great for absorbing your kitchen spills, but did you know that they're also perfect for cooking bacon in the microwave? Simply place bacon side-by-side on a layer of two paper towels and place two more paper towels on top of the bacon. Zap in the microwave at 1-minute interval for 3-4 minutes until desired crispiness is reached. No greasy pan-cleaning to worry about afterwards.

How To: Sear a steak

This video is a demonstration of how to cook a perfect steak. She explains how to sear a steak in a cast iron skillet. She turns the burner on pretty high. She explains that a non-stick pan doesn't work well for this recipe, because a cast iron skillet is better for high heat. She uses a rib eye steak and takes it out of the fridge 20 minutes before cooking so it won't be cold when it goes into the pan. She sprinkles the steak with salt, and freshly ground pepper. She puts unsalted butter int...

How To: Iron a dress or sport shirt

Need to iron a shirt for an important occasion? Smooth out your ironing technique with this housekeeper's how-to, which demonstrates the proper technique for pressing a men's dress or sport shirt using an electric iron and ironing board. For more information, including a step-by-step breakdown of the process, watch this free video tutorial.