Bumper Pull Search Results

How To: Install a chin spoiler on a Ford Mustang

In this tutorial, we learn how to install a chin spoiler on a Ford Mustang. First, you will need to remove the four screws below the front bumper of the car. Now, remove the underneath section that is located just below the license plate. Drill holes inside the new spoiler, then reattach the sensor and put it back in place where the old chin spoiler was located. Make sure you replace any bolts that you took out in the beginning. You can use double sided tape to make sure the spoiler sticks, a...

How To: Prevent road rage

The road can sometimes resemble a battle field. Tailgaters, horn-honkers, and jerks who cut you off are enough to drive any driver batty. Here's how to keep your cool behind the wheel and stay calm during moments in which you'd like to explode.

How To: Tune your car in Photoshop

In this tutorial, we learn how to tune your car in Photoshop. First, open up the image of your car and then add in a picture of different wheels. Then, place these wheels over the existing ones on the car and blend them in, then change the color as you prefer. Do this for the wheels that you are able to see on the image. After this, lower the car and add in a bumper to the front of the car, importing images in from various sources. Continue to add in parts to the vehicle, using shading and bl...

How To: Install a headlight upgrade on a Ford Mustang GT

In this tutorial, we learn how to install a headlight upgrade on a Ford Mustang GT. To start, remove the radiator cover and the clips around it. Now, take a 10 mm socket and remove the bolt next to the headlight. Now, turn your wheel to remove the screws around the headlight. Next, there will be 2 (10mm) bolts you will have to remove, as well as a fender lining. Disconnect your marker lights by pressing on the tabs on both sides of the car. Lay out a blanket to lay your bumper on. Now, remove...

How To: Draw a racing car

In this video tutorial, viewers will learn how to draw the character Lightning McQueen from the Disney movie Cars. Begin by drawing a 3D rectangle. Make it rounded. Add the wheels and windshield. Draw the mouth on the bumper and the eyes on the windshield. Draw the spoiler and add the details of the car. Then erase the guidelines. Then start adding the colors. Add a darker shade of red for shading. Finish by adding the details on the car. This video will benefit those viewers who enjoy drawin...

Walkthrough Left 4 Dead 2: C2, Dark Carnival - Barns

Need a little help with your L4D2 gameplay? Watch for some tips and tricks for Campaign 2: Dark Carnival - Barns. Grab supplies and go out the door. Make your way to the left, past the booths. You will see a bumper cars attraction to your right. Go inside here and back out to the alleyway. In order to get the gong show achievement you will need adrenaline and a melee weapon. If you have neither, you should be able to find a guitar and some adrenaline in the tent across from the bumper cars. N...

How To: Paint a car bumper

In this online video series, learn how to paint your car bumper, from car painting expert Marcel Porter. This experienced auto technician will show you how to sand your car bumper, how to mix the primer for your car and how to apply the primer, how to prepare the car paint and pour it into the paint gun, how to apply the various coats of paint, and how the newly painted bumper should look.

How To: Make hand pulled noodles

Making delicious hand pulled noodles is no longer Asia's best kept secret! In this two part tutorial, learn exactly how to create those delicious noodles - fresh from your own kitchen! Enjoy these noodles in all of your favorite Asian inspired dishes. Delicious!

How To: Replace a control arm on an LLV postal truck or Chevy S-10 pickup truck

The control arm on a Grumman Long Life Vehicle, or LLV, postal truck (used by the United States Postal Service (USPS)) is exactly the same as the control arm on the Chevrolet S-10 pickup truck, so the replacement procedure is almost identical. This video will show you that procedure, but it's important that you get the right part for the side you're replacing. The LLV is right-side steering, so the driver's side is the passenger's side on the S-10. It's a little confusing, so be careful.

How To: Make and freeze pesto using fresh basil

Pesto recipes keep summer going all year long. Rita Heikenfeld, from AboutEating.com, had a bumper crop of basil this year. And one of her favorite ways to keep that basil on her table year round is this pesto recipe for the freezer. Pair this basil pesto recipe with pasta for a fresh and delicious dish that will keep you thinking of your garden all year round. Watch this how to video and learn how easy it is to make homemade pesto with fresh basil. All you need is basil, olive oil, garlic, p...

How To: Make DIY bumper stickers

Bumper stickers are a great way to spread the word about just about anything. If you want to make some, watch this video to learn about both getting professional bumper stickers made and how to print your own using an inkjet printer.

How To: Score foosball goals with the pull shot

Foosball, the tiny table-based version of soccer, is one of the most popular games in fraternity houses and bars across America. It's great for bringing four people together, and is easy to learn but difficult to master. If you're looking to improve you game, watch this video. It will show you how a foosball pull shot works, and how you can use several different variations on the pull to score more goals.

How To: Fix a Huge Dent in Your Car at Home Without Ruining the Paint Job

There are two options when it comes to a dent in your car — live with it, cringing each time it enters your view, or get rid of it. While the latter is obviously the best option, most of us will probably just live with dents and dings since spare money is better spent on the actual functionality of the vehicle. However, there is a way to knock out automobile dents yourself with relatively little cash in the bank.

How To: Wind a bobbin and thread the needle on a machine

Tracie Cunniliers demonstrates how to wind a bobbin and thread the needle using an automatic needle threader in 'Elna 2800'.To wind a bobbin, place a spool of thread on the holder. Place a thread holder next to the spool of thread. Take the end of the thread and wind it around the clip situated on the other side of the machine. Now take a bobbin and pull the needle through the bobbin inside-out. Now place the bobbin on the holder and click into place. Hold the end of the thread and slowly pre...

How To: Crochet an extra puffy puff stitch

In this tutorial, we learn how to crochet an extra puffy puff stitch. First, insert the hook and pull it through. Pull all the loops up even so the hook is horizontal, then wrap the yarn over and enter the hook through the top of the stitch. Pull the loop up and then wrap the yarn over, pull it through, then pull the loop up so the hook is horizontal with your work. Continue to repeat this process until you get to the end of the row. Place chains on the top to secure them, then you will have ...

How To: Make pulled chicken

In this online video series, you will learn how to make pulled chicken from Lori Schneider. Lori will tell you what ingredients you need to make the pulled chicken and how to prepare the ingredients.

How To: Teach your dog to pull a weight

To teach your dog to pull a weight you will need a harness. If you don't have one available you can fashion one out of a rope making sure to tie it around the dogs chest, which is very strong, and around his stomach. Make sure that the ropes pulling area is on top of him so your dog can harness all of his strength to pull forward. Start off with a weight light enough so it won't hurt your dog. Don't make him pull on the weight immediately, have him tug on the weight to get the sensation and t...

How To: Tie your ice skates and keep the laces tight

In this video from Prolite we learn the right way to tie your ice skates and keep the laces tight. First you need a lace hook. It's a metal piece that helps you lace the skates. With the skate on and the laces loose, pull tight on the laces just enough so it's a little tight. Now take the lace hook and start at the bottom. Put it underneath both laces and pull tight. Keep doing this as you go up the skate. As you pull tight with one hand, with the other you put one finger where the tension is...

How To: Use the push pull tool in Google SketchUp

Take a look at this tutorial and learn how to use the push pull tool in Google SketchUp. This tool is the core of SketchUp. It allows you to pull any flat shape into 3D. This instructional video covers how to pull any flat shape into 3D, tips for accuracy and efficiency, how to cut away geometry and infer to other geometry.

How To: Do the Neck Pull #1 pilates exercise

Neck Pull #1 is an easier version of the original Pilates exercise Neck Pull which helps build strength and increase spinal flexibility. By focusing on keeping the abdominal muscles pulled in flat throughout the exercise, the lower back is always protected and the abdominal muscles are being strengthened in their flattest position. Watch this fitness how to video and you will be toning your body with pilates in no time.

How To: Pull text from Excel cells & separate into columns

Mastering your Excel skills? Have a busy Excel workbook or spreadsheet that needs to some organizing? In this two-part tutorial, learn how to pull text from cells & separate them into multiple columns in MS Excel. You will learn how to use the LEN(), FIND(), LEFT(), and RIGHT() functions to pull text from Microsoft Excel 2007 cells & assign them to different columns.

How To: Do pull-ups

Find a fun environment and get ready to work out the chest, back and arms with pull-ups. Learn how to do pull-ups to improve overall health in this fitness tutorial. To practice pull-ups you should grip shoulder-width, contract arms, and pull shoulder blades together. With this how to video you can learn to do pull-ups more effectively.

How To: Start doing pull-ups

In this video, we learn how to start doing pull-ups. First, stand up while you pull down on the machine at a weight you can handle. After this, do wide lat pulls using a weight that is heavy for you, but you can still handle. Next, do seated row exercises in sets to where you can't do anymore of them. Low cable rows are your next exercise, making sure you have the right form while doing them. Start to do W's next, while sitting down on your knees and using control with your arms. After this, ...

How To: Factor polynomials by grouping

A factoring problem that has to be solved by grouping is easy to identify, because you can always identify if there are any similar terms in a polynomial. Now, if you find any variable common in any terms pull them out as the common leaving the rest of the terms. After pulling out the common terms you can group the rest of the polynomial. Be careful while pulling out signs. Pulling out a positive number does not effect the signs of terms in the polynomial, where as pulling out a negative numb...

How To: Use the 3rd row seats on a 2010 Toyota 4Runner

This video produced by Toyota USA shows an owner of a 2010 Toyota 4Runner how to use the 3rd row seats in this vehicle. First we learn that only certain 2010 Toyota 4Runners have the 3rd row seats that fold into the floor. Next we are shown how to raise the seats, to do so you simply pull down on the handle at the top of the seat and then raise the seat back into position. Next pull the seat base forward. Finally go to the rear of the vehicle and rotate the headrests into the upright position...

How To: Tie a scarf using four versatile looks

Wendy Woods from The Refinery teaches you different ways to tie a scarf. The three things to consider when buying a scarf are: size/shape, fabric, and pattern. First style: Fold scarf in half, put around your neck, pull ends through the loop, pull to the side and fluff out ends. Second style: Wrap scarf around neck (with right side twice as long as left), cross long side over short and pull up through loop, pull short side down until tight, pull to the side and fluff out. Third style: Wrap sc...

How To: Make a turtle-shaped pull-apart cake

Interested in making a turtle-shaped pull-apart cake with cupcakes? It's easier than you'd think. So easy, in fact, that this free video cooking lesson can present a complete overview of the process in about two minutes. For more information, including the full recipe, and to get started making your own turtle or tortoise-shaped pull-apart cake, watch this video guide.