Bubbles Search Results

How To: Make a balloon Wall-E

You need 5 balloons-2 gray, yellow, black and white and a pump. Inflate yellow balloon leaving 4 inch tail. Knot the end. Alternate sausage bubbles and pinch twists 8 times. This will create two squares. Inflate the black balloon leaving a 2 inch tail. Make 4 small bubbles and 2 flower petals to make wheels. Inflate gray balloon. Leave 5 inch tail. Make 3 small bubbles for hands-twice. Pinch twist. Make small bubbles for the shoulder. Inflate second gray balloon leaving a 5 inch tail. Make 2 ...

How To: Poach an egg with Chef Meg

In this Food video tutorial you will learn how to poach an egg with Chef Meg. Heat water in a pan to 185 degrees. When tiny bubbles appear at the bottom of the pan, the temperature is right. Now add a little bit of vinegar. Crack an egg and pour it in to another bowl, never crack an egg over hot water. Now swirl the boiling water and pour the egg in to it slowly. The egg will sink to the bottom and as it cooks, it will come up to the top. This is a very moist and gentle method of cooking an egg.

How To: Frost a cupcake with a 1M tip for a stacked appearance

Learn how to frost a cupcake using a 1M tip or large tip. The supplies you'll need are cupcakes and a bag with the frosting and the tip. First, squeeze the bag to remove any air bubbles. Take your cupcake in your hand and start at the outside and work your way in. Then, in one motion, go over the first layer to create a stacked second layer of icing. This method gives you a pretty ice cream cone type effect on your cupcakes. Next, you'll learn how to make your cupcakes look like roses. Using ...

How To: Make healthy wholemeal flat bread,chapati , tortilla

Devlopyourqi teaches viewers how to make wholemeal flat bread, chapati or tortilla. All you need for this is wholemeal flous 2.4 cups, 1 teaspoon of salt and one cup of water. Stir this all together in a large mixing bowl. Next, you should knead this for about 10 minutes. Next, leave this dough, wrapped, to rest for about an hour. Now, after an hour, divide this dough into about 16 pieces. This depends on how big you want your flat breads to be. It does not take too much dough for each though...

How To: Make no knead bread

Watch this video to learn how to make no-knead bread. In a large mixing bowl, dissolve yeast into water. Stir in flour and salt (dough will be sticky). Cover with plastic wrap and let sit in warm place for a minimum of 8 hours at room temperature (approximately 70 degrees). Ten to twelve hours may be necessary, so letting it sit over night is a good idea, provided there aren't any dogs that will jump on the counter! The dough will be ready when the surface is covered with bubbles. Lightly flo...

How To: Make aluminum nitrate nonahydrate

Aluminum nitrate nonahydrate is a crystalline hydrate - a salt of aluminum and nitric acid - Al(NO3)3·9H2O. It's used for a variety of things such as antiperspirants, corrosion inhibitors, and petroleum refining, or… glow-in-the-dark powder. Watch this science video tutorial from Nurd Rage on how to make aluminum nitrate nonahydrate with Dr. Lithium.

How To: Bleed brakes on a 2008 Ninja 250R motorcycle

In this video, we learn how to bleed brakes on a 2008 Ninja 250R motorcycle. To do this, you will need: brake fluid and a Phillips screwdriver. To start, remove the bracket around your brake system, then spin the top of your brake reservoir open. When bleeding the brakes, you will need a plastic pump to remove the fluid. You can purchase this at any auto parts store. Next, open the valve to the fluid and insert your pipe into it and allow it to leak into the bottle. If the fluid has air bubbl...

How To: Create realistic smoke and dust particles in Maya

The key to being able to animate realistic smoke or dust is being able to master the particle texture rate technique in Maya. Once you have gotten this down, you can create any sort of particle effect, such as sand or bubbles in addition to smoke and dust. This three part tutorial series goes in depth into the subtleties of Maya, showing you how to get the most out of working with particles to lend an extra layer of realism to your project.

How To: Create a subtle ocean-like underwater scene in After Effects

This After Effects tutorial will show you a nice underwater scene, complete with light rays, rising bubbles and cloudy ocean mist. You don't have to be a professional AE user to recreate this great animated scene, either! Laurence Grayson demonstrates all the techniques for this subtle ocean-like underwater look using the standard toolkit in Adobe After Effects (CS3, CS4 & CS5). Using Fractal Noise, CC Snow and a Lens Blur with Depth Map, Laurence will have you chilling out in no time!

How To: Hang wallpaper with tips from Lowe's

In this tutorial, Lowe's teaches us how to hang wallpaper. Wallpaper can update a room and give it personality. Make sure you prep and measure your wall before you begin to hang. Now, cut out your paper to the appropriate size for your wall, then draw a line on the wall from the corner to a few inches out of the wall. After this, apply a clear adhesive to the wallpaper if it isn't already adhesive. Now, dump them into a water box and fold the water together and let set. After this, apply the ...

How To: Tape a hockey stick like the pros

Before beginning to tape your hockey stick, take your desired cloth grip tape and score it in half with a knife making sure to not cut through the cardboard core. The purpose of this is to make thinner strips of tape. To begin the taping process, start at the top of the stick and go down the stick in a diagonal for about six inches. Then, back at the top of the stick, wrap with white (shin guard) tape around and around to make a knob. Now, we focus attention on the blade end. Run a thin strip...

How To: Boil water without pots or pans

This video illustrate how to boil water without pots or pans. Here are the following steps:Step 1: You need fire, water and any plastic container with lid.Step 2: Now take water and fill it in the bottle so that there is no air present in the bottle.Step 3: Now put on the fire and put the seal bottle on fire with a distance of around 12 inch.Step 4: Now let the heat warm up the bottle and be careful while handling the bottle.Step 5: After the water has heated up, bubbles will appear in the bo...

How To: Get a nice, even stain on wood

You will learn how to get a nice, even stain on wood in this Home and Garden video tutorial brought to you by TheSoapGuy. It’s really easy and simple to do. Get a finished piece of wood. You should work in a well ventilated area because wood stain generates a lot of fumes. Wood stain comes in aerosol spray and in cans. Mix the stain in the can by rolling the can. Don’t shake it, it will generate bubbles. Open the can and apply the wood stain with a brush evenly on the surface. The more coats ...

How To: Make a pentakis dodecahedron out of balloons

The amateur shows how to make a pentakis dodecahedron of balloons. This balloon has 90 bubbles and is made out of six balloons. Its a good balloon exercise to do to challenge your balloon making skills. On the shape there are either six or five balloons meeting in one space. It is a shape of a sub divide pentagon. On the top is a vertex and coming off the top is a face. This is the kind of balloon you should make to practice your 3-d skill making.

How To: Make a polymer clay jellyroll cane

Jill Erickson from Art Jewelry Magazine demonstrates how to make a Jellyroll cane with polymer clay. Condition two different colors of clay by running them through a pasta machine set on medium. Then, trim off any rough edges. Stack the clay on top of each other and place a little bit of pressure on it to confirm the two layers. Using a blade slightly bevel the edges. Slide the blade underneath the two layers of clay for easier handling. Place a think snake of clay in the contrasting color on...

How To: Create a sunprint cork board & jewelry tray

Grace Bonney from Design-Sponge shows how to create a corkboard and tray from sun print fabric (similar to the craft sun print paper, and available at bluesunprints.com). First iron the sun print fabric, far away from a light source. If printing leaves, first flatten them in a book. Arrange the leaves, then put the fabric in the sun for 10-30 minutes. The longer the time, the darker the print will be. Rinse the fabric in water until the water runs clear, then dry the fabric and re-iron. To ma...

How To: Make Thai spring rolls

Place 2 Tbsp. oil in a wok or large frying pan over medium to high heat. Add garlic, galangal (or ginger), shallots, and chili. Stir-fry until fragrant (about 1 minute). Stir-frying Tip: Add a little water to the wok/pan when it gets too dry instead of more oil.

How To: Make a maple leaf with two balloons

This video shows viewers how to create a maple leaf using two long balloons which are used for making animal balloons. You will begin by inflating the first balloon, leaving a few inches of empty space at the end of the balloon. Begin by making two small bubbles by twisting the balloon and creating consecutive bubbles in the balloon. Follow these with two larger bubbles and 3 more smaller ones, to create a hexagon shape. Continue to create small bubbles, folding them into each other to create...

How To: Make a simple balloon sunflower out of 2 balloons

his video show viewers how to make a basic sunflower out of 2 balloons. First, you should begin with the green balloon which will make the stem. Make sure that both balloons have some empty space at the ends for allowance of air movement during folding. Make two small bubbles on the green balloon and then twist this together with the yellow balloon which will make the petals. Make 6 rather large bubbles to form the petals. Make a loop with the yellow balloon after all 6 bubbles are made and a...

How To: Solve power steering moans

In this video tutorial, viewers learn how to solve power steering moans. Users will need a vacuum pump. Begin by filling reservoir about half way full. Then draw a vacuum of approximately 20"/Hg and let the vacuum sit for 5 minutes. Now recheck the fluid level in the reservoir. Continue this process until the fluid level remains stable. Then top off the fluid level to the "cold" mark of the reservoir. Start the car to check if there are bubbles. Apply for vacuum if there are bubbles. If there...

How To: Make a balloon animal teddy bear with just one hand

Learn how to make a balloon teddy bear using only one hand by following the steps outlined here in this tutorial. You will need one balloon already filled with air. At the end, create a nose. Then, add two bubbles for the back of the head. Twist the five bubbles that will comprise the head of the bear. Once the head has been formed, you will stick the nose in through your ring for the head to create the overall head and face. Pinch twist to create the ears at the top of the head. The body is ...

How To: Enable Dark Mode in Telegram for More Comfortable Late-Night Messaging

Whether gabbing via cloud chat or Secret Chat, there's no denying that private messaging is one of Telegram's strengths. Communications can often occur at night, where Telegram's default bright white theme can be a bit uncomfortable to use, but Telegram supports dark mode on Android and iOS — with a few different themes to match any late-night chatting style.

How To: Make a balloon basket

In this video, we learn how to make a balloon basket. This will be a square anti-prism made of white balloons and pink balloons. But, you can change the color if you would like. Start out by creating large and small bubbles inside the first balloon. Then, tie this with the other balloon and connect them both together. After this, you will have the bottom of the basket. Create a bunch of bubbles connecting both of these and attach it to other bubbled balloons to create a large top above the ba...

How To: Make a balloon flower vase

In this video you'll learn how to make a balloon vase. These are fun balloon vases to hold your balloon flowers. The design of the vase in the video is based on a truncated triangular prism, but with a few added bubbles to make your vase a bit more stable. You'll go step by step on everything you need to use and how to properly twist your bubbles to make your super cool and fun balloon vase. This is a good video for more experienced balloon artist, but beginners are always welcomed to give it...