Bent Backward Search Results

How To: Do a v-wrap pogo stick move

Looking for some new tricks to perform on the pogo stick? Start off in bus driver (twisted hand) position, then while jumping high do a backward 360 reverse, and graduate to a reverse leapfrog done between the legs. That's called a v-wrap. Learn how to do a v-wrap move by watching and following along with this video pogo stick trick tutorial.

How To: Make a boring paper clip into a really fun spinner

In this video tutorial, viewers learn how to make a plain paper clip into a spinner. The materials required for this spinner are a paper clip and a pair of pliers. Take the paper clip and straighten it. Now use the pliers to bend the tip of the clip at 90 degrees. Then bend it 90 degrees to left side and start bending the wire into a circular shape. The shape will look like a pretzel. Now bend the end tip of the wire 90 degrees to the opposite direction of the first bend. You should end up wi...

How To: Shoot a bow in Pivot

In this Software video tutorial you are going to learn how to shoot a bow in Pivot. Open Pivot and select a stick. You can adjust the size of the working space. Adjust the position of the stick in to an arrow shooting position. Then put a bow in his hand and move up the arm to a horizontal position and move the bow in a similar manner. For every new position, click on ‘new figure’ and then adjust the position. While stopping, make the gaps smaller. Now start moving up the other arm. Then move...

How To: Draw Mickey Mouse on a computer

The video is about how to draw a Mickey Mouse in a computer. First draw a little big circle, as head. Then make ears by adding two ears to it. Then draw nose attached to the open mouth. Make eyes above the mouth and nose by putting two rounds. Then make hands like extended to back. Then make the body, slightly bent backward. Then draw legs to the body. Add shoes to the legs. This is the sketch of the Mickey Mouse. Then make the boundaries bold. Darken the round tip of the nose. Color the eyes...

How To: Bend a spoon with your mind

Want to know how to bend a spoon and a fork and a steel bar with just your mind? Check this out. Of course, there are many ways to bend a spoon, and for some strange reason they all require touching the spoon at some point, so that's one clue to how psychics do the trick.

How To: Solder wires when circuit bending

In this video, we learn how to solder bend points on wires. Before you apply the wire, you will want to solder the end point lightly, then take your wire and strip it slightly on the end. Then, add solder to the actual wire, now it will stick easily to your next bend point. When you do this, you can get a lot of wires next to each other without shorting them out. This is the easiest way to do it, just make sure you coat the wire so it sticks on easier. Be careful while doing this and use tool...

How To: Practice the tennis serve knee bend

Welcome to a tennis lesson from FuzzyYellowBalls, the the best place to learn how to play tennis online. Our free video tennis lessons teach you how to play the game in a new way that combines technical analysis, visual learning, and step-by-step progressions.

How To: Tie a double sheet bend knot

Need to know how to tie a Double Sheet Bend? This is a more secure version of the standard sheet bend, and an excellent way of joining two ropes of equal or different diameter. He's using flex rope, but it's a generally good way of securing two lines together.

How To: Bend a carrot

Check out this instructional science video that demonstrates how to bend a carrot. From the Oregon Museum of Science and Industry's teacher curriculum, "No Hassle Messy Science with a Wow", this is an activity using common vegetables. Learn how to bend a carrot by watching the step by step instructions outlined in this science tutorial video.

How To: Do a forward bend in hatha yoga

Forward bends in Hatha yoga can help with headaches and increase creativity. Learn how to do a forward bend in Hatha yoga in this fitness video. Take action: sit in bound angle, bend from waist, keep back straight, inhale & lengthen, and sink with exhale. Cindy Mastry, the instructor of this how-to video, has practiced yoga since the age of eight, and also has a background in Jazz and Ballet. Active in the fitness industry for nearly twenty years, she teaches aerobics, kickboxing, and yoga at...

How To: Use displacement in Photoshop

It might take Einstein to help explain the complex physics of bending light, but when it comes to bending pixels, it is an art commonly referred to in Photoshop as displacement. Displacement can let you use the lumonosity values of one image to bend the pixels of another; a "relativity" of sorts. Bert explains how this all works in this episode.

How To: Tie the Hunter's Bend decorative knot

In this video you will learn how to tie a knot known as the "Hunter's Bend". A "bend" is a type of knot used to join two ends of a rope together. Generally, it should be possible to untie this type of knot, once it's usefulness has passed. This knot was originally created by a man named Phil D. Smith during WWII, at which time he dubbed it the "Rigger's Bend". An English physicist, by the name of Edward Hunter, rediscovered the knot in 1978, and popularized it's use, leading to it's current n...

How To: Do 20 warm-up exercises to build heat

Whether you're preparing for a thirty minute bout of interval running or for an intense weight lifting session, warming up is vital to building heat in your body so your joints are lubricated and there is less of a chance of injury. Warming up before exercising also boosts your metabolism so you get your heart rate up early and burn more calories during your workout.

How To: Strech using the "cardio barre"

Joanie Greggains shows us some stretching exercises using the "Cardio Barre." This is a great way to start your day or to warm up for a mild to moderate cardio workout. She introduces a portable ballet or cardio barre to use for balance and support. If you do not have a cardio barre, you can always use the back of a chair or bookcase. You hold on to the cardio barre facing forward and place your feet shoulder width apart, knees slightly bent as you bend at the waist, keeping your back straigh...

How To: Tie the adjustable bend knot

The Adjustable Bend, demonstrated in this how-to video, was invented by the Canadian climber Robert Chisnall sometime before 1982. More accurately a coupling of two identical knots, the bend is a great way of lengthening or shortening two rope ends tied together. Watch this video survival training tutorial and learn how to tie the adjustable bend knot.

How To: Bend on a harmonica

Watch this harmonica tutorial video to learn how to perform a popular technique called bending on your harmonica. This instructional video covers several different ways to perform this fundamental technique. Bending is not easy--it takes practice. Any level harmonica player will find this how-to video helpful when learning how to bend on a harmonica.

How To: Do Advanced Aikido Rolls

This is an advanced Aikido Ukemi tutorial which explains 11 different exercises seen and unseen. The tutorial includes detailed explanations of how to perform soft high falls from different techniques, various backward rolling tricks and other unseen ukemi variations.

How To: Do a seated yoga shoulder and chest opening sequence

Stretching on rainy days on rainy days is a means of transforming your mood, in to a more positive one. To begin, sit on the floor. With your right leg extended and your left leg bent, with your legs creating the shape of a number 4, hold your right toe with your right hand. If you are unable to reach your right toe, you can use a strap to help you. Open you chest, by extending your left arm, looking left with your head, making a T with your upper body. You can modify the stretch, while you a...

How To: Bend acrylics (like Plexiglas) with a hot air gun

Have you ever wanted to bend a small piece of acrylic? Well now you can with the help of a traditional hot air gun and this informative video. Make sure to wear safety glasses and gloves before trying this project. Clamp the acrylic to a work table, and proceed to turn the gun on and heat up the piece of acrylic, using a steady back-and-forth sweeping motion. As it heats up, you can use your fingers to gently bend the acrylic upward. Leave it at 90 degrees to cool down for a couple minutes, a...

How To: Scratch on turntables for beginners

The video is from the DJ tutorial and it shows us the basic principles of scratching for the beginners. And the first lesson you should learn is that there are basically four movements and here you will actually be not going to scratch put will be moving the record forward and backward. These four moves form the basis for starting to learn scratching. First you need are the type of sounds which are either acapella (song with no music) or with sounds (tracks with breaks on it). Before starting...

How To: Increase spine mobility with pilates side bends

This Pilates Side Bend exercise is used to enhance lateral mobility of the spine. It primarily targets the transversus abdominis, obliques and scapular stabilizers. Attention should be paid to the abdominal contraction to maintain rib connection and prevent the hips and shoulders from rotating. The cervical spine should stay aligned with the thoracic spine.

How To: Tie a bent solomon bar on a line

The Solomon Bar is one of the more versatile ties in the paracording genre of knot tying. Although most prefer the straight line, in this video you will learn how to tie a bent line in your knot. You will get a full tutorial of the entire process with each step shown up close with extreme detail.

How To: Use the bend deformer tool in Maya 7 or later

Learn how to use the bend deformer to make your models a little more dynamic without having to learn all that bothersome animation stuff! Whether you're new to Autodesk's popular modeling software or a seasoned 3D artist just looking to better acquaint yourself with application and its workflow, you're sure to be well served by this video tutorial. For more information, including detailed instructions, watch this free video guide.

How To: Tie a simple overhand bend knot

Know your knots! With this free video tutorial, you'll learn how to tie a simple overhand bend knot. Overhand bend knots are extremely simple, but there are several variations to them as well. The knot is easy to tie provided, of course, you know how to go about making it. For an easy-to-follow, step-by-step overview of how to tie this useful fisherman's knot in a minute's time or less, watch this free video knot tyer's guide.