How To: Make a dramatic spotlight from a household lamp
In this video tutorial, viewers learn how to make a guerilla spotlight using household items. Users will simply need a cardboard cylinder and a light source. Te materials used in this video were a toilet paper roll, piece of aluminum, gaff tape and a lamp. Begin by cutting a couple of 90 degrees slots in the middle of the foil, slide in the tube ad secure it with tape. It should be a bit longer than the tube. Now wrap it around the light source. This video will benefit those viewers who produ...
HowTo: Create a Six-Frame Animation with a Single Sheet of Paper
Pioneered by Rufus Butler Seder in his popular children's picture book Gallop!, and ably demonstrated by WonderHowTo favorite brusspup in the video below, "scanimation" refers to a novel (but distinctly old-timey) technique for cramming multi-frame animations onto a single sheet of paper by a process of superimposition and selective interference. Interested in creating your own scanimations? It's easier than you'd think. In the following clip, Paul Overton of Dude Craft presents a complete ov...
How To: Frame an interview shot for maximum effectiveness
This tutorial focuses on framing your shot, especially when you're planning to film an interview. However, this also touches on how you can frame people for the greatest effectiveness in your shot. Be aware of what is both inside and without the frame, as well as headroom.
How To: Make Slipknot full head masks
No matter what you think of Slipknot's music, you gotta admit they have a cool, horror movie look. This video will walk you through how to make your own Slipknot full head masks. You'll be surprised how simple the process is.
How To: Use a piece of developed film and a camera to see through clothes
The ability to see through clothing has been pursued by voyeurs for millenia, and today with the help of cheap video cameras we are closer than ever. This video will show you how to use a piece of blank developed film and IR to see through different types of shirts and other clothing. It also covers the effects of different colors and fabrics on the technique's effectiveness.
How To: Make your own Masked Magician mask
Make a Magician's Mask Have you ever heard of the Masked Magician? With the television series Magic's Biggest Secrets Finally Revealed, the so-called Masked Magician (Val Valentino) revealed secret after secret of the magicians repertoire. Valentino creates “the magic” then proceeds to reveal the reality of the illusions before a captivated television audience.
How To: Build a 3D camera rig for recording and shooting 3D videos and films
This guide goes over the basics of 3D video recording and the mechanics behind it before delving into something a little more specific. The host discusses how to build a rig that allows for adjustments to be easily made to the interaxial distance and convergence of the two cameras.
How To: Datamosh or combine two videos to create digital art
Datamoshing is a cool new art form that takes uses digital videos to create original artistic works by combining them together using software. It takes advantage of the way that digital video is encoded to make one video appear to dance across and destroy the other video is a very psychedelic way. If you use a Mac, all you need are videos and two programs, which you can get in one .zip here. The programs are FFmpegX and Avidemux. If you have a PC, you'll need to use VirtualDub instead of FFmp...
How To: Make Realistic Fluffy Cloud Props from Things Around the House
If you need a cloudy background for a photo or video, you can always turn an old aquarium into a DIY cloud tank. But, if you want something more fun and less creepy, these fluffy cloud props by Serena Thompson might be more what you're looking for. It'd even make a good Halloween costume if you tweak it a little. All you need is some balloons, tape, flour, newspaper, and a bunch of pillow stuffing. Serena made them by taping balloons together and applying a mixture of water and flour, then co...
How To: Build a fake rock movie prop
We all know that movies now-a-days don't use real rocks, but fake rocks for their film sets. Why? Because it's safer, lighter, easier to movie, and you can design them exactly how you want them. So if you need a rock for your indie film project, make it yourself. There's nothing better than imitation. Watch this video tutorial to learn how to build a fake rock movie prop.
How To: Make an Iron Man Inspired Gauntlet (in Metal)
Here's my latest gauntlet, made in 22 gauge stainless steel using ordinary hand tools you probably already have in your garage. I used Iron Man for inspiration, but it's far from an exact replica. Unlike my previous gauntlets, there is minimal riveting, as most of the parts are held to the glove using epoxy, along with some small nuts and bolts. Aside from cutting out all the parts, which is a little tedious, it's actually fairly easy to do. A fun project for anyone into metalworking, prop ma...
How To: Get a 35mm film look with a depth of field adapter
Shoot digital footage to rival film by incorporating a 35mm DoF adapter into your camcorder rig! For detailed, step-by-step instructions, and to get started shooting footage to rival anything shot on a video-capable DSLR, watch this video guide.
How To: Make an anime gravity defying spiked wig for cosplay
Watch this step by step instructional video on how to do impossible & gravity defying hair we see in Anime/ Manga and Games xD! Great how-to video for those interested in learning how to do cosplay.
How To: Make a fake tree for a play
Well it's time to put on the school play! This year, the school's going to put on Chekov's "The Cherry Tree". Only problem? You have no tree. Well, this helpful how to will guide you through the steps to make a light, portable tree that will turn your school play on its head.
How To: View Golden Globe Nominee Inception Via Code
Inception may not be the lead contender for the 68th Golden Globe Awards, honoring the best movies and television from 2010, but Christopher Nolan's film still collected four nominations— Best Motion Picture, Best Director, Best Screenplay and Best Original Score.
How To: Make a breakable 2x4 wood board prop
Yes, a smashable board of wood. Just what the propmaster called for. A long 2x4 piece of wood prop is perfect for smashing overtop somebody's head during an action scene. The smashable board is easy to make, too. But not as easy as breaking it. Watch this video tutorial to learn how to make a breakable 2x4 wood plank prop.
How To: Make a Lightweight Body-Mount Rig for Filming Unique Front & OTS Shots
Cinema is a matter of what's in the frame and what's out, according to director Martin Scorsese, who asserted that when describing his life's work. Getting the perfect shot can turn an otherwise ordinary scene into something great, both on and off screen.
How To: Create a Cardboard Shader in Maya 2011
Create Your Cardboard Masterpiece Before you can create the shader, you must create an object to test the shader out on so that you will feel comfortable with your results. I have chosen to do the traditional cardboard box for this.
How To: Make a fake pregnancy belly prop on a budget
If you're a filmmaker on a budget and you've got some farce up your sleeve, this video is for you. Watch Indy Mogul's Backyard FX explain how to build a really realistic looking latex pregnancy belly, so that your romantic comedy can grow!
How To: Create an effective candle lit scene in your movie
If you're trying to film a romantic dinner, you'll want the setting to seem dim and candle lit - but you'll still want the lighting quality of the film to be good. Here's how you can shoot an effective dimly lit scene.
How To: Create a realistic, severe burn using cinema makeup
In this tutorial, we learn how to create a realistic, severe burn using cinema makeup. You will need to start out with unflavored gelatin made to be placed on the skin to create texture and a glossy look for blood. Start by applying the gelatin to the face with a flat wood stick for makeup. Apply in strokes so you have a textured look, not just smooth. Give this time to cool and set, then apply different colors of makeup onto the gelatin with a brush. Use browns, purples, and reds to create a...
How To: Build your own DIY police taser for your film
If you remember in the Hangover, there was an incredibly funny scene where the guys were stuck getting out of going to prison by helping the officers demonstrate a police tazer in front of a group of kids on a school field trip. If you've ever wanted to make your own prop police tazer for one of your films, check out this hilarious and informative video! In it, you will learn how to create your own police tazer!
How To: Make feet and hand paws for a fursuit or other costume
If you like fur, and you want to make your own fursuit, the head is the hardest part and you may want to just order that from someone. But the hand and feetpaws are much easier, and as this video will demonstrate you can make your own at home. The video explains all of the steps, and should have you all furry in no time.
How To: Make a realistic Fallout 3 dart gun prop
One of the many reasons for the Fallout series enduring popularity is the wide variety of creative and retro-futuristic weapons available for the player to lay waste with. Most of them are not real, but by gumption this girl has made one of them so! This video will show you how to make something like, but probably not as good-looking as, this amazing replica of the dart gun from Fallout 3. It's made of pretty much the same materials you make it out of in the game, and might be the single best...
How To: Make a LEGO stop-motion movie
In this how to video, you will learn how to make a LEGO stop motion movie. First, you must create your set. The base plate must be taped down to the table or a hard surface. To create the animation, move the LEGO man's leg and take a picture. Move it again and take another picture. Keep on doing this until he reaches the destination you want. The more pictures you take the smoother the video will be. To edit the animation, import it to your computer and open up your movie editing program of c...
How To: Change lenses on a camcorder
Make sure you have the appropriate lens for your digital camera. Look for markers on the lens that correspond with any mark on the camera body. Different brands have different markers. Some have square dots while some have red dots. Line these marks In one hand, hold your camera body firmly pointing to you. While holding it, push the lens button. Firmly hold the bottom of the lens (where the lens meets the camera body), and twist. Some cameras let you twist clockwise, others counterclockwise....
How To: Make a movie poster in Adobe Photoshop CS4
Are you in production for the next big blockbuster film? Well you might need a movie poster and this video will help. This video will show you exactly how to conjure up a custom movie poster using Adobe Photoshop CS4.
How To: Make the quick-draw sleeve gun from "Taxi Driver"
This video tutorial from IndyMogul shows you how to make the quick-draw sleeve gun from "Taxi Driver".
How To: Make cheap moving dragon wings controlled by the body
Check out this video tutorial on how to make cheap dragon wings, controlled by body posture. You can do this project for $18 if you use plastic garbage bags and Scotch tape for the membranes. You'll see how to make very light and strong costume wings. How strong? That strong.
How To: Build a fake wall that you can smash
This video will give you tips on how to make your very own fake wall that is perfect for smashing, thrashing, or just plain old throwing people through. This backyard special effect should really spice up your amateur film making. Just be careful, this fake wall can sometimes look like a real wall.
How To: Boffer sword fight with ten basic strikes and blocks
A lot of you probably don't know what a boffer is. That means a lot of you probably don't know what LARPing is either. Well, get your head out of your *** an listen up...
How To: Make a fake brain
This video from Backyard FX and Indy Mogul shows you how to make a fake brain. Making a brain is not hard but it does take time and creativity. You can make cauliflower brains, gelatin brains or the one I am going to show you out of bread and glue.
How To: Create a falling effect
Steve Nelson from Indy Mogul shows you how to create cool falling or jumping from a building effect. Use a combination of camera angeles, green screen, and editing to create this cool action effect for your films.
How To: Set Up an SJ4000 to Take Timelapse Pictures
This video teaches you how to setup a SJ4000 to take timelapse photos.
How To: When Life Gives You Lemons, Make Lemon Grenades (Portal 2's Cave Johnson Would Be Proud)
Portal has been one of the most critically acclaimed and universally loved games of the last few years, and there's plenty of fan art to prove it. From building a Portal gun, to a gravity defying Companion Cube, and even installing Portal onto a graphing calculator, fans have found some innovative ways to show their love for the games.
News: Bored with Your Cycle? Turn It into Your Very Own Batpod!
Christopher Nolan's Batman trilogy has been one of the most successful film series of all time, so it comes as no surprise that everyone wants their own real-life versions of the Dark Knight's gadgets and vehicles.
How To: Make your own stop motion animation
You don't need a ten-figure budget to make a great movie! With nothing more than iMovie, a camera, and your imagination you can make a stop motion animation. With stop motion, you can bring anything to life. This is a really fun project for aspiring directors of all ages.
News: Born With Three Mouths
Okay, been a bit rampant with the twisted animations lately (exhibits A, B, C), but this is too amazing to pass up. By photographer and filmmaker Alva Bernadine, behold the magic of After Effects:
How To: Add skin and paint to a stop motion puppet
Are you a fan of those old-school animated stop-motion movies? You can make your own easily, and the best way to get started is to make some durable, bendable puppets.