How To: Make an air vortex cannon
You've seen what a vortex cannon can do, so now it's time to build your own! Okay, this air vortex cannon is not huge, but it's definitely a fun thing to construct if you have some junk plastic laying around, and it works really well for its size. Grab a cheap plastic container and follow along to the video instructions and build yourself a homemade vortex cannon!
How To: Assemble a store bought diamond kite
Here is a instructional how to video walk through for assembling a kite. This demonstrations is quite useful if you store bought kite did not come with instructions or if you lost them.
How To: Make a Balloon-Powered Paper Plate Racer
With a little spare time and and a few items you can find around the house, you can make your own balloon-powered paper car. This is a great and easy DIY project that's perfect for competitive kids.
How To: Change the Batteries in a Nerf Vulcan EBF-25 Blaster
Bottoms up Turn the Nerf Vulcan EBF-25 so the bottom side is facing up.
How To: Make your own mylar balloon
Mylar balloons are the best party favors. They are big and shiny and last longer than normal latex balloons. In this tutorial, learn how to make a mylar balloon at home, from scratch. Stop spending so much money at the party store, and next time you have a big event, make your own! Not only will you save money, but it will give your party a cool personal touch.
How To: Make an easy no-sew voodoo doll
Caroline Dean show us how to make a voodoo doll in this tutorial. Start by grabbing two pieces of copy paper, and tear one sheet in half length wise. Next, roll one of the half sheets into a ball, this will become the head. After this, roll the other half of the paper into a tube shape, which will become the doll's arms. Next, place the ball into the center of the copy paper and then gather the corners of the paper around the doll, and roll it into a body shape. Now place a sharp object in th...
How To: Modify a Duncan Reflex Auto-Return yo-yo
Your brand new Duncan Reflex Auto-Return yo-yo may be great, but it could always be greater. That's why you mod it.
How To: Add headlights and a horn to a Power Wheels vehicle
So, your children have the same old boring Fisher-Price Power Wheels that all the other kids on the block have. Do you really want your child to be like all of the rest? No, I didn't think so. Turn those miniature Power Wheels, Dumar or Peg Perego vehicles into a little bit of realism, if you can handle it. All it takes is a little modification and you'll be wishing you were five again. With a few simple hacks, your son and daughter will be burning rubber, jumping curbs and burying those othe...
How To: Construct a Korean fighter kite with your kids
This creative kite is perfect for high flying! Watch this instructional how to video to learn how to build an intermediate level Korean kite. For this project you will need: rip-stop nylon, bamboo sticks, cloth tape, double stick step, scissors, magic marker, yard stick, toothpick, string and fuzzy string. Have fun creating your kite with an adult helper.
How To: Curl your American Girl doll's hair
In this video, we learn how to curl your American Girl doll's hair. What you will do is leave her hair in curlers for a couple of days and then take them out. To put her hair in curlers, you want to spray water on her hair so it's just damp. After this, you will section the hair off, them place the strands into small curlers. Do this all around the head until you have no strands left. When finished, leave her hair to dry for a couple of days. When you take the curlers out, your doll will have...
How To: Make your own Brown Jenkin from H.P. Lovecraft's stories
This tutorial shows you how you can make a stop motion puppet modeled after Brown Jenkin, the eldritch horror that features in in the Cthulhu Mythos of H.P. Lovecraft. Brown Jenkin is a rat familiar with a human face, and this video shows you how to pull off this incredily creepy character.
How To: Apply green wash to vinyl when making reborn dolls
In this tutorial, we learn how to apply green wash to vinyl when making reborn dolls. First, you will need to gather all of your tools to create your doll project. After this, mix up your paint and then apply it to a sponge with a brush. Then, start to dab the paint onto the stomach and chest of the doll, then brush over it with the paint brush. When you finish with this, dab on the sponge again, then set aside to let dry. Continue doing this same process for the limbs and the face of the bab...
How To: Add weights to your RC crawler tires
If you're looking for a video on how to add weights to your RC vehicles tires, you've come to the right place! In this tutorial, you'll find out what you can do to add weight to your tires as well as where are some of the best places to get them. Weights can help add of course weight down on your tires making them a bit more stable and useful when out in a rocky area. So check out the video and enjoy!
How To: Make a replica FG-42 machine gun for Lego figures
The FG-42 machine gun is one of the many brilliantly-designed weapons the Nazi war machine produced during its misguided attempt to take over the world. If you want to make a WWII battles set out of Legos, having some tiny versions of these guns will make your Nazi pieces much more historically accurate and intimidating. This video features detailed instructions for modifying one of the Lego Storm Trooper guns as common as raindrops to look like a FG-42 using only some common hobby tools.
How To: Make plaster molds
When making a plaster mold you must first decide on the shape and size of your mold. Then you need to order your plaster and supplies. Select something to make a mold from, a container to house the plaster lined with a layer of clay to make for an easy removal of the plaster, a weighing scale, plaster, spatula, a mixing tup and jug of water. Weigh out the amount specified by your suplier onto the scale, then add it to water a little at a time. Stir the plaster into the water, scraping the bot...
How To: Make a really good paper airplane
This video shows you how to make a very good paper airplane, that will fly in the air for about 10 seconds before it falls. Start by folding your paper in half length-wise, and then at one end fold triangles from the corners into the middle. Then flip your paper over, and fold the same corners in again, so that your paper looks like a taller point. Take the last 3 inches of the point and bend it into the middle of the paper, creating an X out of the folds. Then fold it all in half so that you...
How To: Make a Lego minigun
This is a Hobbies and Toys video tutorial where you will learn how to make a LEGO mini gun. For making this toy, you will need the LEGO mini gun kit. The mini gun consists of eight parts. Probably the pieces do not have names. So, the kid who is demonstrating in this video keeps referring all the parts as pieces. You first take the long grey piece and put a small light grey piece on top and push all the way down. Then you take another similar piece and fix it at the top and leave it aside. Th...
News: Ex-Dentist Crafts Insanely Anal Model Airplanes
Young C. Park, retired dentist of Honolulu, Hawaii, has satisfied a life long interest in model airplanes with his meticulous, incredibly detailed models of the Corsair and P-51 Mustang. Pictured below is Young Park's Corsair.
How To: Build a classic sled kite in eleven easy steps
Here is an instructional video on a little kite history and step-by-step instructions on how to build a sled kite from a kit. For this project you'll need a pre-cut sled sail, two one-inch dowels, two 2-foot long dowels, bridle string, and six labels.
How To: Make a diorama waterfall
If your son or daughter is planning on making a diorama for a classroom project or just because, making a cool water feature can be a great idea. Using real water may be fine and all, but if you want to prevent any kind of mess from happening, you can build one using materials that give a water like feel. So in this tutorial, you'll be finding out how to make a diorama waterfall from scratch. It's great for dioramas and is sure to be a much better fit than actual water. So good luck and enjoy!
News: Beautiful Kites From 1957
Usually when I see people flying kites at the beach, I associate the pace to a humdrum senior citizen activity. Serene for a few initial moments, dull for the rest.
How To: Make bubbles for a miniature bathtub
In order to make bubbles for a miniature bathtub, you will need Amazing Casting Resin, Triple Thick, micro marbles/decorative beads, a dollhouse tub, and a miniature rubber ducky. You can purchase it in hobby stores: e.g. Hobby Lobby. Open it. Mix it well, according to the package. Poor it into the dollhouse tub. Allow the resin to set. It takes about 1 minute.
How To: Make swords & hearts out of balloons
This video demonstrates how to make a balloon sword and heart. To make a sword, pump up a balloon as long as possible and tie the end. Twist the balloon at this end making a small ball. Bend the balloon at around 20 cms in length and twist both the ends of the balloon at the same level as the ball creating a loop. This is named the 'elephant bend'. Now insert the long end of the balloon into the loop leaving behind a small part. Your sword is ready.To make a Heart flower. Take a red balloon a...
How To: Make a 'redneck' wind chime from old gas tanks
This video is about how to make a wind chime from empty oxygen cylinders. It may be also known as a "redneck" wind chime. As a safety precaution use a small nail to go inside and make sure all the air is out. Use a small hand hack saw and cut slowly to make sure all the air is out. To suspend the cylinders from the middle use wire wrap. Make one loop to begin with and go around to the opposite side and mark the place. Make a single loop cross the wires over, use a pair of pliers where they cr...
How To: Build a cool cardboard RC airplane
Model airplanes are cool and all, but making them out of your typical 8 1/2 X 11 printer paper isn't going to cut it for long, especially if any sort of rain or misplaced foot is involved. Make your awesome model airplanes even more awesome by crafting them out of sturdy cardboard instead.
How To: Adjust and align the brakes on a Nitro RC car
In this tutorial, we learn how to adjust and align the brakes on a Nitro RC car. It's very important to adjust and align your brakes so your RC car stays in top shape and doesn't get ruined while you are using it. Take the caliper out and see what the strength of it is, if it needs to be tightened, tighten it on both sides. Make sure everything is hooked up to a radio, then look to see if everything is reacting in correct order. When you pull the throttle back, everything should be moving in ...
HowTo: Build a Robot That Will Clean Your House
Cheaper (and perhaps cuter) than a maid, the simple scrub bot is easy and cheap to make: "This state of the art cleaning robot is great at polishing floors and shining glass tables (provided that you soap it up first). It also disperses small particulates evenly across your floor in such a manner that your home may look cleaner than it actually is."
How To: Remove money from the cash box in a slot machine
If you have a casino, or maybe just a single slot machine, chances are you're making money. But how do you actually get the money from the slot? All of that cash will sit in there for ages if you don't retrieve it, and it could cause a malfunction if not removed in a timely manner, because of getting too full. This video will show you how to remove money earned from the cash box in a casino slot machine. There's two ways to access the cash box in a IGT S+ model slot machine, so check them bot...
How To: Make a simple balloon snail
In this video, learn how to make a balloon snail! This snail is a perfect addition for a street entertainer act or someone who does birthday parties. Bring the snail to your next party and hopefully make some extra tips! Your Balloon Man, Mr. Fudge, is full of balloon tricks! Be sure to find other balloon videos on WonderHowTo from Mr. Fudge teaching everything from animals to planes! In a few twists and a few ties, you'll be an expert balloon artist in no time!
How To: Make a balloon princess crown
Learn how to make a balloon princess crown - perfect for crowds with children and young adults! Impress your next crowd with some serious ballooning skills with help from this tutorial. Your Balloon Man, Mr. Fudge, is full of balloon tricks! Be sure to find other balloon videos on WonderHowTo from Mr. Fudge teaching everything from animals to planes! In a few twists and a few ties, you'll be an expert balloon artist in no time!
How To: Modify your laser pointer
In this video, learn how to modify your laser pointer to make fun, new shapes. This video will show you how to make an extremely cool new toy and impress everyone. Imagine what your class reaction will be when you start pointing to things with a funky shape instead of a typical pointer. Laser pointers are great for presentations, cat toys and just general fun. Why not modify yours and make it your own?
How To: Install traction bands onto Power Wheels tires
So, your children have the same old boring Fisher-Price Power Wheels that all the other kids on the block have. Do you really want your child to be like all of the rest? No, I didn't think so. Turn those miniature Power Wheels, Dumar or Peg Perego vehicles into a little bit of realism, if you can handle it. All it takes is a little modification and you'll be wishing you were five again. With a few simple hacks, your son and daughter will be burning rubber, jumping curbs and burying those othe...
How To: Make a dragon kite
The awesome kite in this how-to video has a long tail just like a dragon and is traditionally flown to celebrate the Chinese New Year! You will need RSN, tyvek, heavy duty plastic garbage bag, cloth tape, a bamboo stick - 48" long (window blind source), magic markers, a ruler (yardstick), objects to make 2 circles i.e. pot lid, string, a pencil, a toothpick, a hobby stick, and the step-by-step instructions in this video kite-making tutorial. Make a dragon kite.
How To: Fix a loose transmitter antenna on an RC vehicle
This instructional video demonstrates how to fix a transmitter antenna that won't tighten. To do this you will have to take apart your remote control radio. Luckily, this is not as difficult as it may seem.
How To: Build an expert level Bermuda kite with your kids
In Bermuda, people celebrate holidays and special occasions by creating and flying colorful kites! Now you can join in the fun and learn how to build this traditional kite.
How To: Make a spiderman balloon on a stick
Make a simple Spider-Man on a stick. Use a red balloon, a blue balloon, and another color for the stick.
How To: Make a Bridge Out of Popsicle Sticks
Do you have free time? Then build your own bridge out of Popsicle sticks. Bre Pettis goes over the basics of building bridges. As a bonus, you get to watch other people stand on their own bridges and break them.
News: Stabilizing Bracelet Helps Artist with Parkinson's Draw Again
Having control of your basic motor functions is something most people take for granted, but for individuals with Parkinson's disease, that is not the case.
News: Meet SALTO, UC Berkeley's Bushbaby-Inspired Robot with Insane Leaping Skills
It's odd to see grown humans attempting to bounce off walls doing parkour. It's another thing altogether to see a robot doing it.
News: This Jet-Powered, RC Dragon Can Fly Over 100mph—And It Actually Breathes Fire!
WonderHowTo has seen its fair share of dragon-related projects, from dragon wings, to dragon kites, to less-complicated origami dragons, but we've yet to see anything quite like this. Radio-control plane builder Richard Hamel built this incredible seven-foot-long, fire-breathing dragon using a JetCat P80 turbine and a 50,000 volt stun gun, with a 2.4-gigahertz touchscreen radio controller to fly it.
Next Page
Prev Page