Clean Cut Search Results

How To: Clean cut using a table saw, mitre saw or power saw

This short video tutorial Bob Schmidt will show you how to make clean cuts in wood. The blade rotation of any pretty much dictates the best way to run your material through. To get the cleanest cut possible remember these tips: Whenever you run wood through a Table saw, always make sure that your finished side is up. Do the exact opposite when you are using your Power saw. The finished side of your wood must be at the bottom. When you use a Mitre saw, make sure the finished side of the wood i...

How To: Clean cutlery

Sandra Redmond shows a great way to bring a sparkle back to your cutlery. Using tin foil, a bowl and a towel, Sandra adds bicarbonated soda to water and drops the cutlery into it. Watch video for best results. Clean cutlery.

How To: Clean a cut on your pet before you get them to a vet

Sometimes pets get injured, just like people. If your pet has been injured by something in the house, outside or another animal and suffered a cut, you should get them to a vet as soon as possible. However, before you go, you will need to clean up the cut for your pet's comfort and to avoid infection. In this video, Dr. Lauren tells you how to clean and care for a cut on your dog or cat, until you can get it professionally patched up.

How To: Clean and cut a whole pineapple

Chef Dan Bobo explains the proper way to clean and cut a whole pineapple, putting safety and cleanliness first. The first step is to wash the pineapple. Then, you can start cutting it: First, try to find the flattest side of it by rolling it over the table. Then, hold it firmly, make sure you keep your hand clear the knife and just cut the top of it. Discard the cut piece and repeat the same to cut the bottom of the pineapple. Now, you can use the new, flat surfaces of the pineapple to cut th...

How To: Clean and cut an artichoke

This helpful tutorial video demonstrates how to properly cut and clean an artichoke before cooking it. Learn how to do it quickly and easily with minimal fuss. The video covers both the flower and the stem. - First, use a large knife to cut off the stem of the artichoke. You can set it aside to prepare later, if you wish. - Moving about 2/3rd of the way up the flower, cut off the top of the artichoke. - Slice the remainder in half. - Switching to a smaller knife will make the next part easier...

How To: Clean and cut leeks for cooking

In this Food video tutorial you will learn how to clean and cut a leek for cooking. This is really very easy and simple to do and takes very little time. A leek has a green part at one end, then the white part and the roots at the other end. Never cut the root otherwise, you will not be able to hold it together. Cut off the dark green part. You can use it for stock or soups. Then you got to clean the leek. Holding the root end, make a long slit with the knife, turn it a quarter and make anoth...

How To: Make homemade cleaning wipes

Learn how to make your own homemade cleaning wipes and save money with this video tutorial. You will need a roll of paper, 2-3 cups of you favorite cleaner, and a storage container with a lid, a cutting board, and a knife. Cut the paper towel role in half using only one half now. Put the half paper towel roll in the container and soak with the cleaner. Remove the cardboard from the center of the roll and the cleaning wipes will be pulled out from the center of the roll.

How To: Split and clean rock shrimp

In this video tutorial, viewers learn how to split and clean rock shrimp. The rock shrimp looks similar to the regular shrimp, except it has a hard outer shell. Begin by taking off the head of the rock shrimp. Now take a knife and cut down the middle of the shrimp to open the shell. Users may also use scissors to cut. Cut straight down into the back and crack it open. Take the vein out and remove the meat from the shell. This video will benefit those viewers who enjoy eating seafood and would...

How To: Clean skates or rays

In this video, we learn how to clean skates or rays. First, use a sharp knife to remove the roughness from the top of the ray. After this, stick the knife in both of the sides and cut all the way down. From here, you should just have the middle left and the two sides should go in a bath of clean water to get the dirt off. Continue to repeat this process for all of the rays that you have. You can cook however you want when you are finished cleaning. Make sure you cut the right parts off, the m...

How To: Clean and flush gutters

Cleaning gutters is really not that hard. Get out your ladder and position it so that you can reach the gutters. Start by removing all the big stuff such as twigs and bigger sticks that have gotten into the gutter. These bigger items can be removed with your hands. What is left can be pretty yucky? There is a mud like substance that is made up of water, decomposing leaves, newer leaves, and smaller sticks that you won't want to touch. So use a scoop made out of a mild container that is cut in...

How To: Clean a coyote

In this tutorial, we learn how to clean a coyote. Start out by cutting the legs and up to the inside of the rear end. Cut the skin around the feet and then peel the fur and skin upwards. Trim into the butt of the coyote, then cut around the tail into the middle. Keep pulling the skin up around the legs of the animal and around the thighs, using a sharp knife to loosen the skin. Remove the skin completely from around the legs, then cut the tail so only the bone is left and the skin is off. Aft...

How To: Prune & clean a Japanese black pine bonsai for spring

In this Home & Garden video tutorial you will learn how to prune & clean a Japanese black pine bonsai for spring. First you got to prune off the branches that you don’t want and allow only the branches that you want in order to design the tree. After about a year of pruning off the branches cut off the studs created by the left over branches so that the area is flush with the rest of the trunk. Then cut off any dry stubs around the foliage. Next cut off the foliage that is growing out of the ...

How To: Clean and sanitize the kitchen

Looking to give your kitchen a good cleaning this spring? Don't go out and spend a ton of money on sanitizing sprays and cleaning equipment. Cleaning and sanitizing your kitchen is easy, effective, and inexpensive, because everything you need is likely in your kitchen!

How To: Use a rotary cutter for right handed quilting

Watch an experienced quilter glide through four layers of fabric to make a clean cut with a rotary cutter. This instructional quilting video shows how a right handed person would cut fabric. You will also need a straight edge and a cutting mat in addition to a rotary cutter in order to make straight cut in quilting fabric.

How To: Clean your CDs or DVDs with a banana

This video answers the question "does cleaning your CDs or DVDs with a banana work?". First, take a freshly cut piece of banana and rub it in circles on the disk gently. Rub it well for about two minutes. Then, take the peel and rub the inside of the banana peel in circles on the disk for about three minutes. The peel apparently provides some wax for the cleaning process of the disk. Next, take a cotton cloth and wipe it around the disk for as long as it takes to clean up the banana from the ...

How To: Keep a cut from scarring

Keep it clean, covered, and coated, and say goodbye to that scar from the get-go. You will need running water and mild soap, self adhesive bandages, antibiotic ointment, petroleum jelly, sunblock, and silicone gel sheets. Warning: See a doctor immediately if your cut is extremely deep, won't stop bleeding, or appears infected.

How To: Clean a microwave with citrus and water

In this video, we learn how to clean a microwave using water and citrus. You will need 1 lemon, 4 cups of water and microwave safe bowl. On a cutting board, slice the lemon in half. Next, place the lemon halves in the microwave safe bowl and fill it with water. When you are done with this, place the bowl into the microwave and set to 5 minutes. Turn on the microwave and when it's done take the bowl and turn table out. Wipe the inside of the microwave out with a cotton towel. If you have stubb...

How To: Stuff a zander fish for a taxidermy mount

Fishing enthusiasts don't need to waste the skin on a prize catch. Eat the meat, but when cleaning the fish, cut the skin so that it stay in tact for mounting. The delightful English demonstrator walks through the steps of cleaning, prepping, and stuffing a mounted taxidermy fish. Watch this video taxidermy tutorial and learn how to prepare a fish (in this case a zander) for creating a taxidermy mount.

How To: Do a long layered hair cut step by step

This video illustrate how to do long layered hair cut step by step. Here are the following steps:Step 1: First of all clean your hair and then take all your hair and hold them through a clip.Step 2: Now release a inch of your hair from the lower bottom and cut it.step 3: Now release the upper inch layer and cut it slightly above the lower most layer.Step 4: Similarly take the next layers and cut them so that each layer has sharp cutting and is differentiated easily.Step 5: Release hair on the...

How To: Clean the trackball on a BlackBerry Tour 9630

Follow these simple instructions from Zeevideo to clean the track ball on the RIM BlackBerry Tour 9630 device. Using two simple items: a clean sheet of paper and a pair of scissors can clear most of your track ball issues. The BlackBerry Tour 9630 dose not have a removable track ball unit so to clean the trackball cut a small piece of paper that can be use to manure under the inset of the trackball, using your thumb move the trackball to the side allowing just enough space to slid the slip of...

How To: Reconstruct your t-shirt with a fringe design

This video shows us the method to reconstruct your t-shirt with a fringe design. You will need a long fitted t-shirt, scissors and a sewing machine which is optional. Cut off both sleeves of the t-shirt. Now cut the middle of the shirt on only one side. Cut off the collar. Hem both sides of the cut so that you have a clean finish. Now take the scissors and start cutting the fringes. Open the t-shirt so that all the fringes are even. Mark the length of the strips and start cutting. Once you ha...

How To: Set up plumbing for a pond

The Pond Digger demonstrates how to set up plumbing for a pond. First, sleeve all pipes coming through the cement foundation to protect the plumbing from elemental stress and provide additional flexibility. Next, use a clear primer and a clear glue to seal areas where you need a clean, finished looking product. Paint the PVC piping to protect it from the sun's UV rays and prevent from becoming brittle. If you need to do cutting, use a chop saw for a quick, clean and efficient cut. Extend the ...

How To: Make rabbit toys

There’s nothing a rabbit likes more than toys they can climb inside, shred, and drag around. With a good pair of scissors, you can make a steady supply of bunny-pleasers that won’t cost you a thing.

How To: Devein and brine shrimp with Simply Ming

Ming Tsai with Simply Ming explains some shrimp basics. When you prep shrimp, you have to de-vein it, and you have to take the shell off. First cut off the head. Take a knife and slice sideways through the shell. Take out the vein, then get 3 bowls of water and add salt to 2 of them. After de-veining, put the shrimp in the first bowl of water. Keep adding shrimp until you get about a half pound of shrimp, or however much you wish to cook. Then peel the shrimp, and put it into the second bowl....

How To: Clean a dead goose, duck, or pheasant

To clean fowl (ducks, geese, pheasant, etc) in the field, begin by turning it on its back. Lay it down on a flat surface. Grab a handful of flesh, underneath the head and neck and rip it away. Continue ripping the skin and feathers off around the torso. You will need to retain one wing for identification. Cut one wing off with clippers.

Prev Page