How to Build a Shed, Part 10: Applying Roof Sheathing
Henry shows you the right way to install roof sheathing (1/2" Plywood) including the proper spacing and importance of using H-Clips to extend the life of your roof.
How To: Install a T-Mold Transition Between Laminate & Ceramic Tile
Installing a T Mold Transition Between Laminate and Ceramic Tile There are several different types of laminate transitions that you may need when installing laminate flooring. Each one is used specifically for where the laminate flooring ends, such as where the laminate stops at ceramic tile. Other transitions are used where the laminate ends at carpet, vinyl flooring, a threshold or a step down such as a sunken living room or stairs.
How to Build a Shed, Part 11: Installing Fascia Boards & Soffit Materials
The fascia boards and soffit material installation is very important. This is the finishing part of the shed. Henry shows you how to do this in great detail and get perfect results. In this video he shows you how to use his exclusive jig to make it easy to install long trim without any help!
How to Build a Shed, Part 9: Building & Installing Gable Ladders (Rakes)
Using ladders (Rakes) to build your gable overhangs on the shed is one of the fastest and easiest ways to do this. Henry shows you how to layout, build and install the ladders on our shed.
How To: Remove a Shark Bite Fitting Without a Special Tool - Adjustable Wrench Trick
Here's a fast easy way to remove and disconnect your Shark Bite quick connect fitting, without a special tool to do it. We'll show you a awesome little trick using an adjustable wrench. This will work an all different size Shark Bite fittings.
How To: Build and install a cheap dumbwaiter in your home
Home improvement expert Danny Lipford shows how to build and install a cheap dumbwaiter in your home in this video tutorial.
How To: Attach Timber to Concrete Using Concrete Anchors
How to install concrete anchors.How to attach timber / wood to concrete or any other SOLID masonry surface using masonry anchors / DynaBolts. DynaBolts (that's the name for this particular anchor in Australia. They are know by other names in other countries) are the ideal anchor for attaching almost anything to solid masonry such as concrete. This video will look at attaching timber to a concrete floor.
News: The World's Biggest Machine
Introducing the Bagger 288, built by Krupps in Germany. Weighing in at 45,000 tons, this bad boy is the biggest moving machine on the planet.
How To: Install a Split Jamb Door
Let Home Depot show you what it takes to install a split jamb door and the tools needed for this relatively easy job. Go step-by-step in this straightforward project, from centering and leveling the new door to placing shims and where to drive the nails. For more, or to get started on your own split jamb door installation project, watch the video on Dailymotion.
How To: Completely remove an interior door in your home
Have a new door that needs installed? Well, first thing you're going to have to do is remove the old one! Check out this home improvement video tutorial on how to completely remove an interior door in your home.
How to Build a Shed, Part 13: Installing a 3-Tab Asphalt Shingle Roof
Henry shows you how to install a 3 tab asphalt shingle roof in this video. This video covers everything from the type of roofing felt to use, making the starter strips, layout with chalk lines right through to making and installing the ridge caps.
How To: Make a poplar wine rack
In this tutorial, we learn how to make a poplar wine rack. First, cut the top, bottom, and sides of the rack. Then, use a router to cut out the center of it. Now, assemble the rack together by using wood glue. After this, measure the length of the diagonals, then add in pieces of wood that are criss crossed throughout the box. Next, keep these in place with some wood glue and then place wine bottle on the inside of them. This will make a great wine rack for any home and you can paint it as we...
How To: Build a PVC greenhouse
In this tutorial, we learn how to build a PVC greenhouse. The dimensions of this will be 12' x 18'. First, you will use 1/2" PVC pipe that is 12' long that crosses in the middle to make a "t" shape. The frame can be made of treated 2'x 4's. Once you have the frame up, you can use thick plastic to securely cover the pipe and wood and clamp it into place. Once you have this done, you can place your tables inside of the greenhouse and start growing your plants! If you notice the plastic not hold...
How To: Easily cover screws and nails using drywall mud
In this video tutorial, viewers learn how to cover screws and nails with drywall mud during drywall installation. Users will need a taping knife tool. Apply the drywall mud over the screw or nails and use the taping knife to flatten the mud over the screw or nail. Use the knife to take off any excess mud. Apply 2-3 layers of drywall mud over the screw, depending on how long the screw head is. This video will benefit those viewers who are in the construction trades or doing home renovation and...
How To: Salvage a clogged caulk tube
How do you salvage a clogged caulk tube? In this Quick Tips with Chuck Miller video, you will see there is an ingenious and simple way to salvage a clogged caulk tube. Take a utility knife and simply make a slice on the side of the caulk tube nozzle. Probably the entire length of the nozzle is clogged and you may not be able to clear it with a wire or nail. After slicing it, take a sharp tool and remove the clogged material from the nozzle and clean it up. Then wrap the nozzle with electrical...
How To: Cut the perfect inside corner with a miter saw
This video, from Superior Building Supplies, demonstrates the proper technique for cutting the inside corners of crown molding. The presenter suggests downloading several diagrams from the Superior Building Supplies website. These diagrams show the correct position of the miter for several different cuts. When using a miter saw think of the fence as the ceiling and the table as the wall. Cuts for inside corners will always be made using 45 degree angles on your miter saw. Using these techniqu...
How To: Tie a string line
Are you trying to construct your dream house with your own two hands? Learn the tricks of the trade and watch this video tutorial on how to tie a string line.
How To: Use a spirit level when bricklaying
This video shows you how to use a spirit level when bricklaying.
How To: Install a Ceiling Hook
The tools required for this project are: an electric hand drill, a drill bit of the appropriate size and goggles to protect the eyes from falling debris. You will also need a ceiling hook kit, available in most major home stores. In the kit, there is a hook; a spring-loaded anchor; a threaded shank or screw, which is threaded on both ends; and another threaded shank or screw, which is threaded on one side and has screw thread on the other side for wood installation. To install in a sheetrock ...
How To: Knock out a wall
Many homeowners wish that their master bedrooms were larger or perhaps their dining room and living room were one. You can often create larger living spaces in your home by removing non-weight bearing walls. It is always tempting to just start knocking things down but demolishing a wall can be tricky. But with a little planning, you will avoid a house full of dust, long waits to duplicate moldings and trim, and other unplanned construction expenses. The main problem with demolishing walls is ...
How To: Adjust the Alignment of Cabinet Doors
Poor alignment of cabinet doors will cause a kitchen to look run-down and may be embarrassing to the homeowner. Luckily, with a single screw driver and a little ambition, the door alignment can look brand new.
How To: Install a ceramic or porcelain tile floor with Lowe's
In this tutorial, we learn how to install a ceramic tile floor. Before installing, you need to prepare a solid base. First, you want to take off the trim, then calculate the area of the room. Prepare the floor by inspecting low or high spots. You will want to apply mortar, then set the backer boards into place. Screw these into place, then finish covering the floor with seam tape. Apply mortar over these then let dry. Now, you can start laying your tile onto the top of this! Once you are fini...
News: Careful. Swim off the Edge, Fall 55 Stories to Your Death
This is one serious example of trophy architecture. Extreme engineering in prosperous countries like this one in Singapore is meant to stir envy. The Marina Bay Sands infinity pool opened this month, and is located 200 meters off the ground, 150 meters in length. The entire hotel complex is part of a $5 billion investment, and the opposite of a DIY sensibility.
How To: Add a door In an exterior brick wall
If you've got a brick house and are looking to install a door in the brick, this how to will get you there. Be prepared, it's a big job and you'll need to be comfortable wielding several power tools. Are you ready to take the challenge?
How To: Remove a threaded stud from a threaded hole
Ultimate Handyman demonstrates how to remove a threaded stud from a threaded hole. You will often find threaded studs when you are doing car repair. First, remove the nut from the stud. Then, spray it with lubricant. Next, screw the nut back on the stud. Screw another nut on top of the first nut. Grip the bottom nut with a wrench while tightening the top nut. Grip the bottom nut and turn it in a counter clockwise direction. The stud should then pull out of the threaded hole. It may be difficu...
How To: Build a retaining wall with an outside 90 degree wall
This video tutorial shows you how to build a retaining wall system with an outside 90 degree wall. This how-to video is a must-watch for everyone in the building and construction business.
How to Build a Shed, Part 15: Installing Exterior Wood Trim
In this video Henry shows you how to finish all the exterior trim on the shed. This video includes lot of tips to make the finish carpentry in this video easy and accurate.
How to Build a Shed, Part 4: Building Homemade Trusses
Henry shows you how to build homemade trusses. This video includes instruction on how to layout your truss jig to make sure all trusses are identical. After you watch this video, you'll see how easy it is to build your trusses!
How To: Install patio doors in a brick wall
If you've got a brick wall and you're thinking of installing a door, you may have thought you were out of luck. Not so! This helpful how-to walks you through the steps so you can see how it's done. First off, know that this is not a simple task, so be prepared to wield a brick cutter, which is a serious tool in itself. After that you'll be framing out the door, shimming it up, and installing the door. Go for it!
How To: Install Laminate Flooring on Stairs
Installing Laminate Flooring on Stairs Laminate flooring can be installed on a flight of stairs, and this process can also be used when installing laminate on a floor and having to drop down a step to a sunken room.
How To: Remove the air from your boiler or heater
If you hear a lot of banging coming from your boiler or heating system, you may need to perform a little repair. The banging could be the result of not enough water in your system, but it could also mean there is too much air in your expansion tank. And expansion tank is attached to your boiler and helps regulate the air to water ratio for optimum performance. If the air in your expansion tank expands too much, you may need to release some of the air in order to use your tanks properly and st...
How To: Do a 16 inch layout on stud wall
Bob Schmidt from Home Remodel Workshop demonstrates how to frame a wall 16 inches on center. His tutorial is especially helpful, so pay attention to his tips, tricks, and specific techniques.
How To: Install post and dowel fencing
My how-to on Post and Dowel Fencing. My buddy Sven and I, with the help of landowner Rex, installing a massive post & dowel Fence. You need a level, post hill driller, rock bar, and stakes. There are terminator, corner and line posts that have holes specifically for its position in the fence. It's like Lincoln logs that snap together. Lengths of the post vary, but you want 1/3 of the post underground. This is great for lining your property or farm.
How To: Check out foundation cracks below your carpet
Danny Lipford shares some tips on foundation cracks. Watch this video tutorial to see how to check out foundation cracks below your carpet.
How To: Build a retaining wall with an inside radius curve
This video tutorial shows you how build a retaining wall system with an inside radius curve. This video is a must-watch for everyone in the construction business.
How To: Build an anchor-retaining wall system
Are you interested in learning how to construct an anchor wall? Watch this video tutorial to learn how to build an Anchor Retaining Wall System. This a must-watch for everyone in the construction business.
How To: Stack bricks to prepare for a job
This video explains how to properly stack bricks as a part of loading out the job. This is an essential step to do before starting your brick laying.
News: Stone Workers Play Dominoes with Bricks to Create Perfectly-Aligned Wall Cap
Usually, when I see a video that is captioned "wait for it," I'm quick to dismiss what could possibly come at the end of the clip. In this case, however, I was totally wrong and the final result was definitely worth the wait.
How To: Offset a Door in a Door Frame
This video will show you how to move or offset door in a door frame.