When your clutch pedal is dropping down and not coming up again, the cause is most probable one of the cylinders in the hydraulic clutch system. The video will give you a step-by-step tutorial on how to replace both, the master and the slave cylinder. In addition, it is a good idea to also replace the pressure hose in-between the cylinders.
Does the clutch pedal in your car go all the way to the floor? You probably7 have a problem with your hydraulic clutch cylinders. This video will teach you how to diagnose the problem and then fix it yourself at home.
This video will teach you how to operate a Simplicity 3112v light agricultural tractor.
Hydraulic brakes require occasional bleeding in order to get rid of all the air bubbles and keep the brakes working smoothly. This how-to video demonstrates the process of pumping out old oil and replacing it with new, while taking out as much air as possible. You will need a driver, an 8mm spanner, brake fluid, a 4mm allen key, a small flat (chisel tip) screwdriver, a bleed pipe, tissue, and old pads or wood block for pad spacer. Watch this video bike repair tutorial and learn how to bleed h...
Is your power steering binding when you're trying to turn? Or maybe it turns real easy to the right, but extremely hard to turn to the left? Well, that's a classic sign of a power steering rack that has problems. But before you go out and buy an expensive rack and pinion, and take the whole front end of the car apart to replace it, you might want to try a little trick first— Sea Foam Trans Tune, which is also for hydraulic and power steering systems.
Someday, maybe not today, maybe not tomorrow, but someday, you'll find yourself on the road in your car, maybe on the highway, and you'll hear something.
This video tutorial is for educational purposes only. See how to pick a normal lock with a tension allen wrench and a small screwdriver.
Your vehicle's power steering pump is integral to your car functioning at all. That's because the power steering pump is what provides the hydraulic power for steering. Without it, your car would pretty much go nowhere. Inside the pump, retractable vanes spin, pulling hydraulic fluid in with low pressure and spitting it out at high pressure. Every pump has a pressure relief valve to make sure the pressure is never too high, but still your steering pump may wear out over time.
It's almost impossible to fold a piece of paper in half more than seven times under normal circumstances. Sure, the guys on MythBusters managed to fold a piece of paper eleven times, but they used a sheet of paper the size of a football field and needed the help of a forklift and steamroller to get the job done.
If you're Mitsubishi transmission is acting up, there could be something wrong with the DSM valve body, which is the hydraulic control center located in the engine. This video is super helpful for anybody needing to troubleshoot their valve body. You'll learn how to take the valve body out, and then reinstall it.
Hydraulic brakes are the new kid in town in the world of bike brakes, but their simplicity and functionality make them a good choice if you want to upgrade your brakes. This video features a professional bike mechanic explaining how to overhaul a Hayes caliper brake and reset the piston on it.
There's still a ton of gold to be had out there, you just need to know how to find it. There a certain spots to look for, like ancient riverbeds and high benches. This video will show you where and how to pan for gold in ancient riverbeds and high benches. Learn how to find them and what to look for.
One day, your car may break down and you won't be able to afford to hire a mechanic, so what do you do... you look on the web for some how-to vehicle repair videos and become your own car mechanic, that's what. You don't need any advanced training to perform repairs and simple maintenance on your automobile, but you may need a few tools. Invest in the basic tools and you'll be prepared for just about any car malfunction you can think of. These tutorials will help get you on your way, as long ...
As Alfred monologued in The Dark Knight, "Some men aren't looking for anything logical, like money. They can't be bought, bullied, reasoned, or negotiated with. Some men just want to watch the world burn."
This may just be the most in-depth guide out there for replacing ball joints on trucks, so be prepared. You'll be learning the full details on replacing both the upper and lower ball joints on a 2-wheel drive, full-sized vehicle. To begin, grab all the necessary tools below, then proceed to watch all 31 parts of this repair video walkthrough.
The video gives you a step by step instruction how to replace the rear shock absorbers on your Audi 100/A6. The replacement is necessary when the absorbers loose their hydraulic fluid, you have problems driving the car, or you find places on the tire where the profile has vanished. Such a tire you'll see in the video.
When you're using vacuum power, moving water, or compressing air, it's more than likely being done with some sort of pump. I'll be needing a pump for some of my future projects, so in this tutorial, I'll be showing you how to make your own customizable PVC hand pump that will let you do all three.
Six Flags is teaming up with Samsung to make riding a roller coaster a little more thrilling, and quite possibly a little more nauseating as well.
Here's how to build a sexy looking water-fuel generator that will convert your tap water into an extremely powerful, clean burning gas!
MATLAB, an acronym for "matrix laboratory," was created over 40 years ago to service the applied mathematics community. The powerful programming language now has over four million users worldwide and is of particular import to engineers, scientists, and economists.
Changing the rear disc brakes on your 2001 Chrysler Town & Country (henceforth referred to as T&C) can be quite a challenge, but if you can spare a few hours (remember that you need to budget time to get the brake parts from the parts house) and are willing to get a little dirt on your hands, then you can save quite a bit of coinage!!! If after reading this article you do not feel like you can safely change your brakes, then bring your vehicle to a repair shop and let a professional do the jo...
Brake fluid is used in hydraulic brake systems to help apply immediate force to the brakes when you step on the pedal. It's essential for your road safety to use the correct type of brake fluid and keep it at the recommended level at all times. So fill your car's brake fluid with this video's advice. Fill your car's brake fluid.
In this video, This Old House General Contractor Tom Silva demonstrates how to repair a basement wall leak around a drainpipe.
This tutorial shows you how to mount a front blade on a Simplicity tractor from the 60's or 70's. This method works for most 60-70s era Simplicity tractors with front blade mounting brackets and a hydraulic lift. Mount a front blade on a 60 - 70 Simplicity tractor.
I want to drive one of these monsters around this winter. DC Shoes Co-Founder and Rally Team Driver Ken Block collaborates with Subaru to create the worlds fastest cat track operation automobile for backcountry access for snowboarding.
Heatherwick Studio's London based rolling bridge is an engineering marvel. Lots of fun, and immensely satisfying to watch (via YouTube, assuming you can't see it in person).
A group of industrious, like-minded friends built this amazing DIY metal motor home from scratch, converting an old semi into luxury-style living.
In 1782, an English plumber named William Watts came up with a clever method for making shotgun ammo. Watts constructed a six story "shot tower", consisting of a series of perfectly lined up holes, drilled into all six floors of the structure. Watts then poured molten lead through a sieve from the top story, through the holes of each floor, finally landing on the bottom floor in a pool of water. The cushioned impact resulted in a perfectly formed bullet.
LIFE magazine has posted a gallery of bizarrely wonderful old school scientific models. Don't miss the giant fetus or massive colon (double ew). Behold, science education before computers ruled our world.
Gil Adam, a student of Industrial Design in Bezalel Academy of Arts and Design in Jerusalem, Israel, has created a 3:1 scale model of his favorite plastic camera, the Holga. While the camera is just a model (non-operational), it's pretty fun to see the oversized object next to Adam's face, and his dog.
Pull up outside any construction site and you'll see tools scattered about—hammers, jigsaws, nail guns, hydraulic pipe benders—these are the tools of the trade. You would be hard-pressed to build a home or office building with just your hands! On that same page, security professionals also have their own go-to tools that they use on the job site, only their job site is your server.
Pour expanding foam in the sun roof of Bam's Hummer and he will never drive it again or you could line the car with plastic so you could get it out. Keep in mind that even with the plastic it will break out all the windows and maybe the windshield. It's expands really fast so you have to be quick. Your best bet would be to mix four 5gal buckets at once. The faster you mix it and the hotter it is outside the faster it will expand. Also there is several types of this foam some of it is weak and...
Before one of the crew goes to bed, put high power numatic/hydraulic equipment under the bed. While he's sleeping, activate the hydraulics and launch him across the room.
