An important part of surgery is knowing the various types of closures to perform. This medical how-to video demonstrates how to do a two-hand tie for wound closure. Follow along and learn the special technique for doing two-handed tie wound closures for surgery.
Studying to be a podiatry nurse? Then here is a nursing how-to video that teaches you how to treat a wound that came as a result of toe nails being cut too short. Every nurse should know the basics of this technique, follow along and see how easy it is to care for a toe nail wound on a diabetic patient. These medical tips are sure to help you pass your nursing exam with flying colors.
In this song tutorial, you'll learn how to play the introductions to two popular songs, "Dust in the Wind" by Kansas and "Wildfire" by Michael Martin Murphey. While this tutorial is best suited for intermediate and advanced guitarists, players of all skill levels can play along. Watch this lesson to get started playing "Dust in the Wind" and "Wildfire" on your guitar!
Get started on sewing projects today! Winding thread onto a bobbin will be second nature very soon. Watch this video sewing tutorial and be on the way to smooth bobbin winding.
Want to know from which side the wind is blowing? Learn how to make a wind detector with this video tutorial.
This video is a short demonstration of the wind king rope lighter, a small lighter that uses a length of cloth rope and a flint to create an ember for fire making. With this helpful lighter, you can make fire in places where the wind would normally destroy your lighter's flame.
The economy is down, so what's one way you can save money? Build a vertical axis wind turbine! This eco-friendly four-part video tutorial will show you just how to make one so you can save money. These are detailed steps for making the vertical axis wind turbine. The blades can be easily interchanged offering different shapes and materials to experiment with. This design can create turbines up to 90 inches in diameter and up to 15 feet tall.
This video from Danny Lipford explains how to make a cover for raked leaves so that the wind won't blow them away. Get a tarp and cut it to the right size. Get two wooden dowel rods and put them along two ends of the tarp. Turn the tarp edge over the dowel rods and tape them down with duct tape. The cover can be used to cover leaves that are in a wheelbarrow or on the ground. You can also lay the tarp on the ground, rake the leaves into the tarp, drag them where you want them and pick up the ...
Like getting your watercolor papers and paints ready before you unravel a Monet-worthy masterpiece for the ages, knitting takes some prepwork that many beginning knitters may forget about. While it may seem that alll you need are two knitting needles and a ball of yarn, skeins of yarn often need to be unwound and then wound back up into a ball of yarn to make them usable.
In this Education video tutorial you will learn how to build a wind turbine with PVC windmill blades. This project when completed will charge a 12V battery. You can turn a motor in to a generator. When you spin the shaft on the generator, electricity is generated. So you get a motor with a flywheel and attach the turbine blades to it. When the blades turn with wind action, electricity will be generated. Take PVC pipes, 8" in diameter and 24" long. Cut the blades out of the pipe as per directi...
The wind is one of the most dynamic of all natural forces, and rendering it properly in a digital environment is important and challenging. This video will show you how to create and animate wind in the 3D graphics suite Blender by showing you how to make a flag, then make it wave realistically. Unless you want to make a replica of the flag planted on the moon, you're going to need some wind in your 3D flag model, and this video will show you how to make it so.
Many people who use braided line complain that it gets wind knots which may have to be cut off and expensive line discarded. Almost all "wind knots" have nothing to do with the wind and are caused by user error. This video explains how to avoid those knots and start taking advantage of braided fishing line.
Are you picking up sewing for the first time, or simply looking to brush up on your sewing machine skills? This video covers all the basics of how to sew with a sewing machine.
Joe Richardson, Five Sprockets consultant, demonstrates how to build your own functional boom microphone. First, if you don't already have one, get a microphone from your local electronics store. Then, pick up a mic holder. Next, you'll also need a telescoping pole like a painter's pole. You'll also need zip ties and metal bonding glue. A piece of fake fur from a fabric store will act as a wind sock to cut down on noise. Attach the mic head to the painter's pole with the metal bonding glue. N...
If you want to perform an interrupted and a subcuticular suture you should first make a bite through the skin. In order to make a bite through the skin you should put the needle point perpendicular to the surface, turn your wrist and make sure it arrives at an even point from the entry point. Grasp the needle as it comes from the tissue. Make sure you always keep the needle in view. Then ti e the suture with an instrument tie and form the knot on the side of the wound so it does not effect th...
If you want to have your character punch a very hard object, or punch a person very hard, then it will help if you can show their damaged, bloodied knuckles afterwards. Now you can with help from this video. It will teach you how to create a very gory fake knuckle wound out of basic prop and makeup materials. Now your characters can punch with authority.
Looking for a quick video lesson on how to play Earth, Wind & Fire's "Let's Groove Tonight"? It's a pretty easy tune (and consequently one well suited for budding bassists) - there are only two parts to the song and this video provides a thorough breakdown of each. For more information, and to get started playing the bass line from "Let's Groove Tonight" yourself, watch this free video bass tutorial.
First of all you have to understand that if you don't have a rudder in you kayak, still you need not worry. The rudder is far from being any essential piece of the kayak. However if you still decide to want one then you can add one later. Rudder is placed on the side of the kayak. When you want to lower it then you have to pull the chord to move it down from its stored position. You have to control the rudder with foot pedals. The main purpose of the rudder in a kayak is not to turn a kayak. ...
For anyone who has ever used a microphone, trying to record something during a windy day can be a bit of a pain. Of course we can eliminate most of the interference with a simple wind screen that can be purchased at the store, but many times they can be a bit pricey. Well, in this tutorial find out how to make your own wind screener for a Zoom H2 mic. Enjoy!
Tacking is an important part of windsurfing and, of course, it's best to start learning when there are light winds. Usually, at this level, most time is devoted to the gybe move, and the carve tack is a variation of this, a transition that you need and will give you the confidence to get on smaller boards and go out in stronger winds. When done well, the tack can also look impressive. Watch Sam Ross teach you how.
Starboard made this video in order to make an intro to windsurf. It's a windsurf academy video that goes over the start to windsurfing. It covers basic techniques like equipment setup, tacking, gybing and getting up.
Watch this winds tutorial video to learn several different ways to play sharps and flats on your pan flute. You can push the flute into your lip, tilt the instrument, lower your jaw, or push your top lip out to cover part of the opening. These four methods allow even beginners to easily play sharps and flats on the pan flute.
When a wound is particularly messy or has been sutured improperly, a dog ear can form. A dog ear is a flap of skin that does not fit cleanly into the suturing of the rest of the wound. This video features a doctor explaining how to suture a dog ear properly. One handy tip: if you lengthen the laceration away from the dog ear, the skin will hang looser and be easier to suture. Counterintuitive, but effective.
One of the many great things about Mumford and Sons is that many of their songs are achievable for all levels of guitar players to play. This video will teach you how to play their song "Winter Winds" on guitar, and don't be scared! You can do it.
You can use the FreeForm plugin to create the look of cloth blowing in the wind - like an animated ribbon, or a banner waving in the wind. The key is in designing the displacement map to get a truly realistic effect.
Killing bugs used to be the domain of fancy chemicals that, it turns out, hurt us as much or more than the bugs. If you have a flying pest problem and need a green way to control it, watch this video to learn how to make a DIY wind tunnel trap for your insect nemeses.
This medical how-to video demonstrates how-to suture an open wound. Follow along and learn the step by step process of closing open skin. Note that suturing should be performed by a medical professional.
This is a video tutorial that explains how to make a wind powered LED out of a pinwheel and an old VCR. Why have just a pinwheel when you can have an LED pinwheel?
This video demonstrates how to treat a chest wound outside of a medical facility using the plastic wrapper of a battle dressing and bandage.
In this video hip hop lesson, dancer, choreographer and vocalist, Samantha Davies teaches us 5 counts of 8 of an intermediate hip hop dance to the song Wind it Up by Gwen Stefani.
Learn how to wind a cable so that it will unwind without kinks and tangles.
Watch this winds tutorial video to learn how to play a common Irish hornpipe, "The Boys of Blue Hill," on the tin whistle. This instructional video is intended for intermediate whistlers who are able to pick up songs just by listening. Intermediate tin whistlers will see their technique improve after watching this helpful how-to video and learning how to play "The Boys of Blue Hill" on tin whistle.
Want to learn how to play Bob Dylan on the guitar? With this tutorial you can learn how to play "Blowing in the Wind" by Bob Dylan on the acoustic guitar. This version is a simplified version of the song and is not exactly how Bob Dylan plays it. "Blowing in the Wind" uses the capo on the 4th fret. This lesson is geared towards intermediate guitarists because it assumes prior knowledge of guitar playing. Watch this how to video and you will be able to sing and play along to "Blowing in the Wi...
There are a lot of videos out there that offer instructions for creating all sorts of fake wounds. Most of them, however, focus on cuts and gashes rather than that other devious and action-packed type of wound: the burn. This three-part video features detailed instructions for making a burn wound on your face or other body part using makeup and other household products. Now your characters get lit on fire and you can render the results accurately.
Want to play Donovan's "Catch the Wind" on your ukulele? Learn how with this free video ukulele lesson from Ukulele Mike. Whether you play the ukulele or bass kazoo, there is no better way to improve your chops than by learning to play your favorite songs. Not only is it more fun and much easier than running drills or memorizing a chord book by wrote, it's obviously also a wonderful way to build your repertory of songs. For more information, and to get started playing this classic Donovan pop...
This is a tutorial on how to make a $2.00 didgeridoo. This musical instrument is made Redneck style out of ABS pipe. The Digeridoo is an Australian wind instrument. This one is a non-traditional plastic version.
Nina Perlove teaches vibrato for the flute in this instructional flute video. This technique can be applied to other wind instruments, too. This tutorial is great for a beginner attempting the vibrato for the first time, or for someone looking for ways to improve their vibrato. These exercises have a long history and have been tried and proven. Practice your vibrato on the flute and improve your flute playing skills!
Watch this winds tutorial video to learn how to play the pan-flute. This instructional video covers the tuning and some basic techniques for beginners who have never played the pan-flute before. This helpful how-to video will help you get started playing the pan-flute.
Watch this winds tutorial to learn how to play a hit, the easiest and most common type of Irish ornamentation, on a tin whistle. Even first-time tin whistle players will find this video helpful. You'll be able to play hits on your tin whistle in no time after watching this instructional video.
In this video, we learn how to do an orbit at an orbit light show. The light should spin clockwise in one and and counter clockwise in the other. You must pay close attention to keep these spinning back and for. Start out by winding the lights up and mastering this so you can produce different shapes. After you learn the wind up, learn how to make the stars with it by winding it up one direction and let the orbit in the middle unwind itself in the opposite way. Once you're comfortable, you wi...
