Supply Skywriting Search Results

How To: Remove the power supply from a G5 iMac

Removing the power supply from the iMac G5 is a two step process. First, see where the power supply is located. Then begin the process of removing it. You can do using a very easy way described in this video. First unscrew the 4 torx screws that are located around the edges of the power supply. Be careful not to be too rough while doing so. Once you have unscrewed them, then gently lift or remove the power supply. However, we still have to unplug it from the iMac. Therefore, carefully unplug ...

How To: Upgrade your power supply on a PC

Upgrading your power supply can solve all sorts of problems that may arise after upgrading your PC's hardware. THe Lab Rats, Andy Walker and Sean Carruthers, will let you know how to tell if you need to upgrade your power supply and if you do they will help you figure out what kind you need and show you how to install it.

How To: Breadboard a DIY USB power supply

While breadboarding may seem like some odd combination of snowboarding and consuming the fluffy pastry at the same time, it's actually just the technical term for using a construction base to build a prototype electric circuit. Breadboards are solderless so they're great for circuit design and are reusable.

How To: Make a catapult out of office supplies

Looking for something fun to do with all those office supplies you've been stealing from work? Or maybe you just want to goof around in your cubicle? It's possible that you are an honest, dedicated, hard worker, but whatever the case may be- no judgement, just a video guide to making an office supply catapult.

How To: Set up an Element Tattoo power supply

Steve of Element Tattoo Supply demonstrates how to set up a tattooing power supply, specifically the Silver Bullet model. It has a voltage switch on the back. If in the US, set the power supply to the 115-volt setting. Outside the US, switch to the 220 volt setting. There are two power plugs in front for tattooing equipment (such as a foot pedal), and a dial for adjusting the power. The relative power is displayed on a LED display.

How To: Fix a running old style fill valve toilet

This Home & Garden video shows you how to replace a running old style fill valve toilet with something more modern. Shut the supply line to the toilet and flush to remove the water from the tank. Then remove the supply line. Now take a wrench and loosen the plastic nut of the old fill valve located under the tank. Then lift the old valve and keep it aside. Take a 'flow master', which is a new type fill valve, place it in the same spot and hand tighten the nut under the tank to hold the flow m...

How To: Make a silicone face with Gel-10 & Polyfoam

Attention aspiring horror movie makers! Have an interest in making fake heads to use as your gory extras? BITY Mold Supply has supplied the world with this great tutorial on how to cast a silicone head or face from Gel-10 and Polyfoam. In the later half of this video, BITY lends great tips on how to paint your finished silicone face for a realistic look.

How To: Survive a hiking trip in the woods

Out for a leisurely hike in the woods? Well, don't leave home without a few simple supplies or you could be facing a survival situation out-of-doors. Make sure to take supplies along with you, like a compass, but make sure you know how to use it. Watch this video outdoor safety video and learn how to survive a hiking trip in the woods.

How To: Create a cute DIY purse wall hanger on a budget

If you have an endless supply of purses and a limitless supply of wall empty wall space, it's about time you made some DIY purse racks. In this video, you'll see a very easy (and cheap) way to hang all of your purses (and please your boyfriend). For this DIY purse rack, you'll need some coat and hat hangers (hooks), feather boas, screwdriver and a tape measure.

How To: Save money & water with your toilet flush

This video tutorial is in the Home & Garden category which will show you how to save money & water with your toilet flush. The first step is to turn the water off. Then remove the lid of the tank, disconnect the bowl refill supply and make sure that the overflow pipe is open. The next step is to take the new sink, attach it to the water supply point, place the drain in the overflow pipe and position the sink over the flush tank. The modification is done. Now turn on the water supply and your ...

How To: Clean your bong with simple supplies

You don't have to spend a lot of money on supplies to clean your bong. And by cleaning it, you will save the expense of having to buy a brand new device. Bongs require maintenence to function properly. In this tutorial, learn how to clean your bong with common household products for a cheap and efficient solution.

How To: Install a toilet with ease

First, apply wax to the toilet hole so it doesn't leak. Next install the supply line. Set the bolts on the flange and attach a wax ring onto the bottom of the toilet. Set the toilet over the bolts. Next, stick the gasket to the bottom of the tank and put the tank on the toilet. Tighten the bolts on either side of the tank. Then, hook the supply line up to the toilet. Attach the toilet seat to the toilet by screwing it into place. Finally, turn on the water supply. Your low flow toilet is now ...

How To: Make a Microwavable Heating Pad

Relieve stress and wrap your aches in warmth by making your own microwavable heating pad. Just gather up these supplies (cloth, needle and thread, uncooked rice, spices/herbs, and essential oils) and follow along with this how-to video. Since this easy crafting project is made from houshold supplies, you'll save money on buying a heating pad from the store. Follow along with the steps in this video project and enjoy your new therapeutic, homeopathic treat.

How To: Make a wall of supply depots for Terran players in StarCraft 2

After 12 years Starcraft 2 is finally here to blow your mind. If you're looking for help with the game, you've come to the right place. We have tons of videos about how to do just about everything in the game. We have strategies for winning campaign and multiplayer games. We have guides to using the immensely powerful level editor. We'll even teach you how to build a Terran Barracks out of Legos. This video will show you how to you can make a mobile wall of supply depots on your Terran base's...

Prev Page