Start Trimming Search Results

How To: Start a STIHL trimmer or brush cutter

In this tutorial, we learn the proper way to start a STIHL trimmer. Before you begin, make sure you are wearing the proper protection gear. Next, check the fuel level, throttle trigger, stop switch, cutting tool, and harness. Everything should be tightened and in good starting condition. Make sure you are away from any obstructions before you turn on the cutter. Pull the starter grip and guide it to rewind it properly. Pull the rope several times, then move the choke to the starter position. ...

How To: Model trim in 3D Studio Max

This clip provides a quick reference on how to create realistic trim quickly using splines and editable polys. Whether you're new to Autodesk's popular modeling software or a seasoned 3D artist just looking to better acquaint yourself with the application, you're sure to be well served by this video tutorial. For more information, and to get started modeling realistic trim in your own 3ds Max projects, take a look!

How To: Trim lamb shoulder

In this video, we learn how to trim a lamb shoulder with Lidia Bastianich. Start off with your raw piece of meat laid out in front of you. You will want to trim the meat around the outside where the most fat lies. Remove the fat that is excessive with a sharp knife. Cut as close to the bone as possible, then trim off the excess fat. Remember, some fat is good to keep on the meat for flavor. Cut the meat into cubes after you have removed the fat from it. Once finished, you will be able to roas...

How To: Trim with the Slip Mode in Avid Media Composer 5

This clip discusses how to perform trims with the Slip Mode in Avid Media Composer 5. Whether you're new to Avid's popular non-linear editor (also known as "The Avid") or are a seasoned digital video professional just looking to better acquaint yourself with Media Composer 5, you're sure to enjoy this free software tutorial. For detailed instructions, and to get started using Avid 5 yourself, take a look.

How To: Use A-side single roller trims in Media Composer 5

This clip presents instructions on how to do A-side single-roller trims within Avid Media Composer 5. Whether you're new to Avid's popular non-linear editor (also known as "The Avid") or are a seasoned digital video professional just looking to better acquaint yourself with Media Composer 5, you're sure to enjoy this free software tutorial. For detailed instructions, and to get started using Avid 5 yourself, take a look.

How To: Trim a round bowl with Simon Leach

This instructional ceramics video shows you how to trim a round bowl. It is much easier of you have a centered pot to begin with. It is also helpful to leave a bit of extra clay in the base so that one can trim more freely. Once the clay is semi-dry, you can begin trimming. After trimming, smooth the trimming marks out using a rubber rib. A touch of water on the rim will re-elevate the rim after trimming your round pot.

How To: Paint interior trim and molding

Before you paint the walls it is important to paint the trim first. A painting pad is a very useful tool for painting along the edge where the ceiling meets the wall. It has guide wheels on it and will roll right along as you paint the trim. Next you will want to paint your woodwork including your baseboards and trim. When you go to roll the wall first take some painters tape and run it along the top of the baseboard to keep the specks that fly off the roller from getting on the baseboards. U...

How To: Trim a tiered bowl with Simon Leach

Watch this instructional ceramics video to learn how to trim a large tiered bowl with Simon Leach. With a thin bowl, one needs to be careful when balancing the upside-down bowl on the bat. Leach trims each individual tier with a large trimming tool. The large and possibly wobbly ceramic bowl can become once again even and graceful with some adventurous trimming. As we can see from the trimming process, when throwing a tiered bowl, it helps to leave some extra bulk.

How To: Control tail spin on a PicooZ mini helicopter

To begin in controlling the tail spin on your helicopter you need to turn your helicopter on and then turn the controller on. On your controller there are two trim bars. If it begins spinning to the left, tap the right trim; likewise, if it begins spinning too much to the right, tap the left trim. Unfortunately there is no memory in the PicooZ helicopter, so every time you turn on the helicopter you have to trim it. In the example video the helicopter needed to have the trim bar pressed 12 ti...

How To: Trim your rose bushes

Starting a rose garden? Modern Mom is here to help. Learn from gardening expert Melinda Myers how to properly trim rose bushes after the winter to promote new growth in the spring. Prune brown, dried up rose branches and keep your garden fresh and fast growing.

How To: Trim or cut your dog's nails safely

Dress and trim your dog to the nines by watching this video on how to trim or cut your dog's nails. Making sure their talons are nice and people-friendly is a necessary component of pet care and will also boost canine egos as they look at their sharp silhouette in the mirror.

How To: Trim bowls

Watch this ceramics tutorial video to learn how to trim your bowls using the pottery wheel and some trimming tools. The instructions in this how-to video are very detailed and best for beginner to intermediate potters with some experience. These tips will help you improve your bowls by trimming them nicely.

How To: Trim video in Final Cut Express

After you've assembled your clips in order, you can fine tune your sequence by trimming the edit points between each clip. This video explains the many tools you can use to make trimming videos easy and precise, including the ripple and roll tools. These tools allow for seamless editing.

How To: Trim your own bangs to save time & money

We know what you're thinking: You have two left hands and even cutting in a straight line is a monumental feat. But trust us, even butterfingers can cut their bangs professionally. In fact, if you tend to cut slightly slanted or jaggedy then your bangs will look even better!

How To: Easily trim side swept bangs

This video is about how to easily trim side swept bangs at home. You will need a plastic grocery bag, a spray bottle, a clip or ponytail holder, a comb and some sharp scissors. First put your hair behind your ears so you can see where your bangs start and comb your bands straight down and comb the rest of your hair back and clip the back of your hair back. Get the bangs wet with your water bottle. Decide what length you want. Make sure to cut them a little longer than you want them to be beca...

How To: Trim your split ends

This video is about how to trim your split ends. This video gives detailed instructions about how using heat and trimming too often can lead to split ends and how they can lead to breakage. The instructor teaches you that just randomly clipping your ends does not fix your split ends, but makes them worse. She tells you to twist your hair before you start to clip to expose the hairs that are hidden from you. This last step is very important.

How To: Trim a pot

In this video, we learn how to trim a pot. First, you will want to get your pot wet and place it onto a ceramic bowl shaper. Start to spin the bowl and get it wet as you use a sharp tool to remove the trim from around the pot. Continue to do this until all of the trim you want to remove is gone. When finished, you will need to refire this and place glaze back onto it. This can be done with any type of ceramic pot, just make sure you keep it moist while you are cutting it, so it doesn't break ...

How To: Install a kitchen garden window

Ron Hazelton shows a great way to bring the outdoors indoors with a garden window. First remove the existing window. Pry off the exterior trim and remove the old window framing. Build a new frame for the new window with 2x4's and shims. Trim away any exterior siding if necessary. Use waterproof flashing paper and caulk to make the new window watertight. Install the new window into the frame with rust-resistant screws. Add another run of caulk, then trim off the excess flashing paper. Use anot...

How To: Make hedge trimming easier on yourself

In this video, you'll learn some neat methods for making hedge trimming an easier chore. Save yourself the back ache and follow the steps in this video. Easier maintenance always begins with the proper tools. Lay down a drop cloth to avoid debris, and make sure you remove wayward branches. Doing the hedge trimming will be a snap from now on!

How To: Trim using chuck

Watch this ceramics tutorial video to learn how to trim your pottery using chuck. This technique and the tips on how to do it are best for intermediate potters with some experience. This instructional video will have you trimming you pottery using a chuck in no time.

How To: Trim raku pieces

Watch this ceramics tutorial video to learn how to trim your raku pieces. This how-to video is best for potters with some experience with the pottery wheel. The tips in this instructional video will help you easily trim your raku pieces.

How To: Trim your dog's nails without cutting

In this tutorial, we learn how to trim your dog's nails without cutting them. Before you begin, you will need a Dremel tool with a sandpaper drum attached. Now, have your dog sit down and place their paw up on your knee. Now. grab the tool and gently place it on the tip of the dog's nail. Do this on each of the nails, until you have trimmed all of the nails. Make sure you don't trim down too much or push too hard, this could cause a burn on the dog's nail or injure them severely. Keep treats ...

How To: Properly prune and trim your garden

Something that every gardener needs to know is how to prune and trim your plants properly.Being able to perform both of these functions is important for keeping your garden beautiful and making sure that they will last for a long time. When pruning or trimming plants, it's important to always use the right tools for the job.

How To: Make a chic doll coat

Channel Pulip shows you how to make a holiday coat for a doll. You will need wool felt, with no crease, trimming, lace, ribbon or button. Cut out the pattern as shown. Sew together at shoulder with 4mm seam. Pin and sew sleeve on. Sew lace on coat bottom and sleeve bottoms. Sew the side seams. Turn the coat inside out. Sew trimming from top of coat to bottom. Sew trim on collar and sew collar to coat. If you are adding pockets, sew trim on them and hand stitch the pockets to the coat. To clos...

How To: Do ceramic detail on trimming & sealing

Simon Leach teaches you how to do ceramic trimming and sealing. You wet the top of the pot and place it on the wheel. You push down on the bottom, sealed side, when the wheel is spinning. You use the trim tool to cut into the base side. You do this at an angle and make sure you hold the trim tool like a stake knife, not like a pencil. You empty out the leg until you are pleased with it. You round off any sharp corners and you have to put the last piece, the seal. On the bottom you take a piec...

Prev Page