Rod Faster Search Results

How To: Identify the different parts of a fishing rod

In this video tutorial, viewers learn how to identify the different parts of a fishing rod. This video introduces 2 types of rods, spinning rod and conventional rod. The spinning rod is used for light tackle fish. The line comes off from the bottom of the rod. The rod is designed to bend flexibly. The conventional rod is used for bigger fish. The line comes off from the top of the rod. The rod bends more stiffly. This video will benefit those viewers who enjoy fishing and would like to learn ...

How To: Replace an outer tie rod on a Cadillac DeVille

In this video tutorial, viewers learn how to replace the outer tie rod of a 200 Cadillac De Ville. Begin by unscrewing the 5 bolts on the wheel and remove it. Users are able to shake the out tie rod with the wheel on it, and feel the looseness. Now break lose the jam nut at the back of the tie rod with a wrench to be able to disconnect the supporting nut. Then hit the steering knuckle with a hammer to loosen the tie rod. Now rotate the outer tie rod off of the inner tie rod and place on the n...

How To: Install a new shower curtain rod & shower curtain

A new shower curtain rod and curtain is one of the best ways to freshen up the look in a bathroom! This video shows you how to mount a new shower curtain rod and hang a fresh shower curtain on your new shower rod! For this project, you will need: a shower curtain rod, shower curtain rod mounting brackets with screws, a tape measure, a number 2 pencil, a Philips head screwdriver, shower curtain hanging rings and a new shower curtain.

How To: Put a fly fishing rod and reel together

In this Outdoor Recreation video tutorial you will learn how to put a fly fishing rod and reel together. Steve shows you how to do this. Every reel has a reel seat and most fly rods have a slot under the grip into which one end of the reel seat slides in. At the lower end of the rod, push the ring over the reel seat and tighten he screw on the rod. This should be nice and tight. Before your fishing, make sure it is tight. To put the rod together, take the next segment of the rod and push it i...

How To: Perform the basic fly fishing cast

In this video tutorial, viewers learn how to do a basic cast in fly fishing. Begin by holding the rod like your shaking someone's hand. The fore fingers should be over the fishing line and wrapped around the rod. Do not grip the rod too firmly. Before casting, make sure that you have a certain amount of fly line out at the end of the fly rod. Keep your wrist stiff and elbows to your side as you cast the rod. Now pull back the rod and release the line forward. This video will benefit those vie...

How To: Make a prop lightsaber

In this tutorial, we learn how to make a prop light saber. you will need rubber o rings, a metal pipe, a dow rod, and attachments to combine the rods together. First, grab the metal pipe and dow rod, and place the rod inside of the pipe. After this, use an attachment to combine the two together. Next, cover one end with duct tape. Now attach two endings onto the rod and place a longer dow rod covered with duct tape onto the rods. When finished, use the o rings to keep the blade in place and y...

How To: Install the TechT Lightning Rod on a paintball gun

In this video, our author, KRASHARPSHOOTER, shows us how to install a TechT Lightning Rod. First we remove the screw on the underside, and turn it over and remove the four base screws. Now lift up on the piston housing and remove it. Then, remove the nut and the tension guide. Now you can remove your ratchet axle and rod. Now remove the pin that hoods the ratchet rod and axle together.

How To: Adjust the truss rod on your guitar

The truss rod is a big metal bar that goes through the whole neck on your guitar and is used to control the amount of arch that the neck of your instrument gets. You will want the neck to be essentially straight, with a tiny bit of curve. Lots of things can cause your wood to arc..weather, storage, age.. and the truss rod is used to fix this and keep the neck straight allowing you to play your piece properly. All guitars come with a truss rod and they are easy to adjust if need be. This tutor...

How To: Use dowsing rods for paranormal research

Tim Derr from the East Coast Trans-communication Organization shows how to properly use dowsing rods during an investigation. Dowsing rods help pick up spirit communication and is a great way to back up other paranormal research. They take a lot of practice and a little bit of technique. Watch this video tutorial and learn how to use dowsing rods while ghost-hunting, communing with spirits or the dead, or any other paranormal investigation.

How To: Set up a basic fishing rod

A great fishing tutorial that shows how to set up a basic rod. This casting rod video is presented by an English fisherman with great respect for his equipment. It is a two section rod, with aligned rings.

How To: Play Rod Stewart's "Maggie May" on acoustic guitar

Learn how to play Rod Stewart's "Maggie May" on acoustic guitar with this free guitar lesson. This video guide presents a complete, step-by-step breakdown of the song including chords and picking patterns. For more information, and to get started playing this popular early Rod Stewart song on your own acoustic guitar, watch this tutorial.

How To: Replace outer tie rod ends

In this video, Rich Pin teaches us how to replace an outer tie rod end on a vehicle. First, get the vehicle in the air supported on jack stands, and remove the tire wheel assembly. Next, put a mark on the top of the tie rod shaft so you know where to line it up when you replace it. Next, loosen the jam nut from the rod, remove that and the nut. Remove the tie rod end after this by shocking it with a hammer. When it is removed, replace it with a new part and then attach all the bolts and nuts ...

How To: Pitch correctly with a spinning rod

Pitching a spinning rod is one of the best ways to catch deep fish for those who use spinning rods. This video features a bass fisherman going through some tips on how to pitch correctly in order to catch the most bass. He may be doing it in his front yard, but the lessons herein are no less valuable out on the water.

How To: Use a fishing jig

Learn how to use a fishing jig which recreates the motion of a fish swimming in simple steps. First connect the fishing jig to a fishing rod and tie a knot in it. Throw the jig in the water by holding the rod properly in your hand. Control the rod carefully and pump them in slowly. Keep the fish in the line of your reel and slowly bring them in.

How To: Adjust the neck on an electric guitar

Step by step tutorial video on adjusting the neck of your guitar. First you need to remove the truss rod cover to gain access to the truss rod. Make sure you have the correct Allen key when adjusting your truss rod. If your guitar came with it's own Allen key make sure you use that one. Put a capo on the first fret. To increase the tension on the truss rod turn the Allen key to the right. To decrease the tension turn it to the left. Always check the gap between the frets and the strings.

How To: Make a Toilet Paper Launcher

Shoot streams of toilet paper in midair with this ultimate TP machine, the Streamerator. Take a look at this instructional video and learn how to make a toilet paper launcher with a generic, electric yard blower. This gadget is extremely easy to make. First, you need a steel rod about the same length as the blower, the rod has to be bent at 90 degrees. Two ground clamps are used to mount the steel rod which will serve as a roll holder. A flat punched piece of metal is measured and screwed int...

How To: Use dowsing rods

Learn how to use dowsing rods for ghost hunting. Actually, dowsing rods were more commonly used to find hidden water wells in the ground, or for finding unmarked graves. This video tutorial will show you the basics of dowsing rods.

How To: Pick a reel for a fishing rod

Picking the right reel is as important as being a skilled fisherman. In this tutorial, learn exactly how to choose the proper reel for your fishing rod. By following these tips, you will definitely improve your ability and skill. So, when picking a reel for a fishing rod, it's important to consider what kind of fish you are trying to catch. In this video you will learn about the variance in prices among fishing rods and reels with help from a fishing trainer.

How To: Set up a deep sea fishing pole

Want to go deep-sea fishing but lack the necessary know-how when it comes to the sport's specialized equipment? Never you fear, brave pescador(a): this free video guide will teach you everything you need to know to set up a deep-sea fishing pole.

How To: Remove the plunger rod when unclogging a sink

In this video you will see how to remove the plunger rod when unclogging a sink. To unclog a sink drain, remove the bent portion the drain and clear it out. Normally something or the other gets stuck inside it causing the clog. Also check out both ends of the other pipes. The plunger to your sink is attached by a little rod. Slide the little catch off the rod; remember which hole it is on so that you put it back correctly later on. Then take pliers and loosen the plastic nut gently and pull t...

How To: Reel a fishing rod

In this how-to video, you will learn how to reel a fishing rod. The most common mistake with people using spinning reels is that they are using it upside down and backwards. The correct way is making sure the spinning reel is facing downward and you are reeling forward. With a conventional reel, the reel should be facing up. The crank should be going forward. Never crank the reel backwards. Make sure the non reeling hand above the reel to help give you torque in order to fight a big fish. Wit...

How To: Make a hemp bracelet

The Hempdiaries believes that you too can create a bracelet using hemp and jewelry accessories. The narrator first begins by showing you what the two mandatory materials you will need which are hemp and a dowel rod. To begin he shows you how set the dowel rod between your knees to provide a foundation for the string and then an arms length of two pieces of string folded in half. Tying the string around the dowel rod he shows you how to begin the flat pattern for the hemp bracelet and that thi...

How To: Remove an inner tie rod end on a Saturn S-Series car

One day, your car may break down and you won't be able to afford to hire a mechanic, so what do you do... you look on the web for some how-to vehicle repair videos and become your own car mechanic, that's what. You don't need any advanced training to perform repairs and simple maintenance on your automobile, but you may need a few tools. Invest in the basic tools and you'll be prepared for just about any car malfunction you can think of. These tutorials will help get you on your way, as long ...

Prev Page