Heat Normal Search Results

How To: Tune a nitro engine

Tuning a nitro engine can be dangerous work if you don't the necessary precautions. The first and most important precaution is to educate yourself. You want to make sure that the engine doesn't heat up or cool down too much, you want it at it's normal operating temperature. Follow the detailed instructions in this video too see the rest. This video will show the proper, safe way to tune your nitro engine.

How To: Heat shrink rear window tint

In this video, we learn to heat shrink a rear window tint. First, prep your window using soapy water. Next, rinse with car with a soapy cloth and spread on the lather. After this, let it dry and cut the film around the pattern. Next, create an anchor by dampening in an 'h' shape. Next, lay the window film down with the liner side up. Anchor the film onto the window along the 'h' shape. Make sure your fingers are vertical, then heat the film until the lines react. Then, smooth on with the hand...

How To: Help mild dehydration

Adults lose 10 cups of water daily through normal activities, and heat, exertion, or illness can increase that amount. Pay attention to the thirst, dry mouth, dizziness, and tiredness that dehydration can cause—before a little problem becomes a dangerous. Learn how to cure mild dehydration.

How To: Lift fingerprints from a bottle of water with super glue

Does someone keep drinking part of water bottle and leaving them around your house or office, taunting you with their wastefulness? Thanks to forensic technology, it is possible to catch the culprit with easy household materials. This video will show you how to use super glue to lift fingerprints off of a water bottle where normal fingerprint-lifting technology would not be sufficient. Plus, you get to use a heat gun! Always fun.

How To: Adjust a rear low-normal derailleur

Most rear derailleurs are high-normal, which means that they default the chain to high gear. Shimano derailleurs, however, are low-normal, defaulting to the lowest gear on the bike. This video details how to adjust a low-normal derailleur into normal cable tension. This works very differently than on a normal bike, so make sure you pay attention!

How To: Cook bacon and eggs in a paper bag

It is very simple to cook. First you take one paper bag and bacon and eggs. Then keep the bacon in the bag and keep eggs in a normal water bottle to freeze it. After that you can keep both the bacon and eggs in the paper bag. Then put the bag onto a stick. The bag should stay over the heat with the help of the stick. This process should continue for 7-8 minutes. Then you are ready to eat bacon and eggs.

How To: Create a wavy hair look with extensions

Wavy hair is a classic, glamorous look, but not everyone has the exact hair for it. With this video, we learn a quick and easy way to get that timeless wavy look using extensions. It's entirely easy. Beginning with a spritz of water or your best anti heat damage spray, you then merely use your crimping or curl iron the same way you would with your normal hair, applying a light touch, not going for actual curl, and checking your results often. When done, you can spritz your hair again, and run...

How To: Do normal probability calculations on a calculator

Probability computation is a complex process and even using a calculator can be difficult. But normal probability calculations can be performed quickly with the help of calculator once you know how to use it. So when you have to calculate a probability from a normal distribution you can use the functions on your scientific calculator. You can use the normal CDF function from you calculator to compute the area under a normal curve. The function requires lower band and upper band values, the me...

How To: Use the Empirical Rule w/ standard normal distribution

In this video tutorial the instructor explains about the concepts of standard normal distribution and the empirical rule and how to use it to solve an exercise. He starts by explaining about standard normal deviation saying that in a standard normal deviation the value of mean is zero and the value of standard deviation is one. Now he draws the standard normal deviation by drawing a bell curve on an axis. Now he points the mean and standard deviations on it. Now using these concepts he goes o...

How To: Paint with normal maps in modo

Devolped by the same team of engineers responsible for LightWave 3D, modo, lowercase, delivers the next evolution of 3D modeling, painting and rendering in a single integrated and accelerated package for the Mac and PC. And now, modo is a true end-to-end solution that includes true 3D sculpting tools, animation and network rendering! More than just features, modo is a truly elegant integration of technology, raw horsepower and refined workflow. With such a wealth of inbuilt features, however,...

How To: Alleviate menstrual pain naturally

Youtipis4u has come up with a few tips to reduce your menstrual pain in a natural way. Many of us ladies opt for painkillers or other medicines to reduce menstrual discomfort. Here is a way that is natural and has no side-effects. One of them is raspberry tea leaves. During the menstrual days, we can opt for a raspberry leaf tea instead of a normal one. Raspberry leaves relax uterine muscles. That way, uterine contractions reduce and hence the pain decreases. This tea is perfectly harmless, h...

How To: KNow if you have the normal pronation gait pattern

Normal pronation is when running your foot hits heel first, then toe, then pushing off with the inside of your toe. It is usually found in runners who have normal arches. This type of running ensures that all of your weight is moving forward with little wasted motion. At the end of your stride your forefoot should be slightly angled away from your body and when your foot lands there should be a very slight angle between your foot and leg. You can check the wear on your shoes to tell if you ha...

How To: Build up a grip using a heat-shrink sleeve

Take a look at this instructional video and learn how to use a heat-shrink sleeve to build up your tennis racket's grip. To do this you'll need a heat gun such as a standard blow dryer to warm the heat-shrink sleeve. Be sure not to heat it at one point, you'll want to heat it all over evenly. You should never use more than two sleeves, otherwise the bevels will completely disappear.

How To: Lower the cost of home heating

Whether you use electricity, natural gas or heating oil, there are many practical steps you can take to reduce your overall heat consumption and energy bills. In addition, multi-fuel stoves and fireplaces are fast gaining popularity as alternatives to traditional heat sources. Watch this video home improvement tutorial and learn how to lower the cost of home heating.

How To: Apply normal maps when creating textures and shaders in Maya 2011

In this tutorial, we learn how to work with normal maps within Maya 2011. Whether you're new to Autodesk's popular modeling software or a seasoned 3D artist just looking to better acquaint yourself with the Maya 2011 workflow, you're sure to be well served by this video tutorial. For more information, including detailed, step-by-step instructions, watch this video guide.

How To: Test for proper pan heat

A simple water test can be used to check for a properly heated pan. Check out this short video tutorial from Rouxbe on how to test for proper pan heat. This video will support your cooking experience and will provide you with additional relevant information during your culinary time pan frying.

How To: Defeat the Corrupted in Prince of Persia (2008)

If you're having difficulty dispatching any of the Corrupted from 2008's Prince of Persia, this helpful battle guide from IGN might be just what you need. If forewarned is forearmed, this video tutorial will arm you to the teeth with the necessary knowledge to beat each of Ahriman's four lieutenants – the Hunter, Warrior, Alchemist & Concubine.

How To: Apply normal maps to textures in MAXON Cinema 4D

This tutorial takes a look at using normal maps to improve you textures—as well as looking at a quick use of Photoshop to make textures from photos. Whether you're new to MAXON's popular 3D modeling application or are just looking to get better acquainted with Cinema 4D and its various features and functions, you're sure to enjoy this free video software tutorial. For more information, and to get started using this trick in your own Cinema 4D projects, watch this 3D modeler's guide.

How To: Model realtime water (animated normal maps) in Blender

Learn how to create simple animated normal maps for a realtime water effect within Blender 3D. Whether you're new to the Blender Foundation's popular open-source 3D computer graphics application or are a seasoned digital artist merely on the lookout for new tips and tricks, you're sure to be well served by this free video software tutorial. For more information, including step-by-step instructions, take a look!

How To: Do a reverse French braid like Lauren Conrad

This video shows how to make an inside-out French braid across the front of the head. First divide the hair into three pieces like a normal braid at the very front off to one side. Instead of braiding the normal way, make the middle piece go over the top alternately on the left and right. Keep picking up more hair and adding it in, like you would do for a normal French braid. Continue braiding across the top front of the hair. The braids can be done tightly or loosely however you like, and th...

How To: Grow your hair long and get rid of split ends

To repair damaged hair. Cut off the dead ends. When shopping, remember that you get what you pay for in hair care products. Use a shampoo and conditioner that says "Strengthening" or "Repair" to rebuild the bonds in your hair. Use a leave-in conditioner that protects your hair from the heat, and protects from sun and wind. To keep it healthy, do not blow dry your hair. It causes too much damage. When you use a heat iron, use a heat protectant. Don't wash your hair every day. If your hair is f...

How To: Solder & heat shrink wires

This is how to solder wires properly and then heat shrink them in order to insulate them. Firstly upkeep of the soldering iron is required to keep it from oxidizing. Portable versions of the iron are also available to make work more convenient. A solder sucker is required to suck up and solder left behind by the iron. Alternatively you could use a solder wick which when used with the solder iron can absorb all the solder over the circuit board. Onto the actual process, strip off some of the w...

Prev Page