Clearwater Boat Search Results

How To: Remove a boat from the water for transport & storage

Eddie shows us how to remove a boat from the water in this video tutorial. First, take down the canvases and wrap them up. Now, put the antennas down and drive the boat to the loading dock. Next you will need a large truck that has a hitch and trailer attached to it, and secure everything so the boat stays on and doesn't come off of the trailer. Take the drain plug out of the boat before you transport it, to make it lighter. Transport the boat to your house, and place bricks over the front so...

How To: Maintain a mechanical steering system on your boat

It seems that maintaining the steering system on your boat is a pretty important task. Not only does it make sure your boat is running smoothly and effeciently, but will also make sure that you don't face certain doom. So in this tutorial, find out exactly how to maintain your mechanical steering system on your boat. You'll thank yourself and so will your boat. Enjoy!

How To: Tie a cleat hitch for boating

Check out this instructional boating video that demonstrates how to tie a cleat hitch for boating. This is a type of hitch used to tie a line to a cleat. All you have to do is make one full turn then a figure 8 with the last turn reversed and you've got your cleat hitch tied. Learn how to tie a cleat hitch or a cleat knot with this boating tutorial video and keep your boat secure to a dock.

How To: Power wash your boat

This video is led by Eddie from Long Island Boaters Club. As the boating season ends, Eddie explains, it is very important to clean and prepare your boat for storage for the winter. An important part of this process is to power wash the algae growth and barnacle debris that can cover the hull very quickly. After taking the boat out of the water and placing on blocks, he lets it sit for one day. Then using a pressure washer, he removes the algae growth. A scraper is used to remove the actual b...

How To: Remove old boat lettering from your boat

It's easy to remove the old lettering from your boat before applying your new boat graphics. Check out this instructional boating video to learn how to do just that. Heat them with a hair dryer and slowly peel them off. When you have all of them removed, scrape off any remaining glue residue and clean the surface thoroughly using ordinary glass cleaner. Your new boat lettering is ready to be applied.

How To: Save fuel while boating

Want to get the most from a tank of gas in your boat? This how-to video from Boat U.S. offers some tips for boaters on how to save fuel. Make sure not to carry around extra weight and to keep your boat in top condition. Watch this video boating tutorial and learn how to save some gas.

How To: Construct a paddle-boat

Learn how to create a one person paddle boat out of everyday objects. This narrated video goes through the process of creating both the boat and paddle. A poncho, a papasan chair, and a few pieces of wood will be needed. This guy is nuts!

How To: Pump out the waste on your boat for winter

In this Outdoor Recreation video tutorial you will learn how to pump out the waste on your boat for winter. This video is from LIBoatersClub. Take your boat to the waste disposal area and secure it. Remove the cap from the waste tank. Be careful not to drop the cap. Operating the waste disposal unit ashore is very easy. Just switch on the pump, take in some water in to the hose and then attach the hose to the out let on your boat. Hold it tight and open the valve. It will suck out all the was...

How To: Switch a fluorescent t-top light with an led light

This video tutorial will show you how easy it can be to switch your old fluorescent lights with an led light. This video focuses on the t-top of your boat or watercraft and shows you how to save energy even on a boat. It's a definite upgrade over what standard boats have and gives you a much sharper color than those other boring dull lights. So sit back and enjoy this easy to do tutorial.

How To: Fold a floating origami boat

You may know how to fold an origami paper boat, but chances are you don't know how to origami a paper boat that can actually float. This video tutorial will show you the step-by-step instructions for each fold involved in the boat building process. You only need on sheet of paper for this floating boat, which means it's actually really easy to fold.

How To: Winterizing your boat engine block

In this Outdoor Recreation video tutorial you will learn how to winterizing your boat engine block. For this you will need some screwdrivers, compressed air and a flexible hose if you have a hot water heater system on the boat. First you got to drain out all the water inside the engine. Remove the two plugs from the block and one plug from the sea pot as shown in the video and drain out all the water. Be careful and don't drop the seals while removing the plugs from the engine. While the wate...

How To: Stabilize your boat fuel & oil and fog out your engine

Eddie from the Long Island Boaters Club shows in four easy steps how to prepare the engine of your boat for the winter. He discusses the three items needed for proper preparation and makes product suggestions. Then he takes us through the procedure. He starts by pouring an additive to the oil tank and a stabilizer to the fuel tank. Eddie shows us how to attach a hose to the water jacket to flush salt water. He runs the engine for ten minutes. At the end of that period, he demonstrates how to ...

How To: Winterize your boat and prepare it for Winter

In this tutorial, we learn how to winterize your boat and prepare it for winter. First, you will remove the drain plug from the boat and let the water out. After this, remove the oil drain and drain the oil out of the motor while it's warm. Exhaust fumes while the engine is turned on as well. Now, start the engine and let it run for a few minutes staying idle. After doing these steps, your boat will be ready to be stored for the winter. So when you turn it on when it's ready, it won't stall o...

How To: Install a switch panel on a boat

When you have so much technology on one small boat, things are bound to get confusing. That's why having a big enough switch panel is a great way to keep track of all the different switches that your boat has. In this tutorial, you'll find out the steps needed to insatll a switch panel on a boat. Depending on how much experience you have with using tools, this video may be a tad bit difficult. So sit back and pay attention. Good luck!

How To: Fold an origami paper boat that floats

With just one tiny sheet of paper, you can fold millions of things, like this boat. Not only is this a great little origami boat that's easy to complete, but it also floats on water! After watching and following the quick fold instructions, try out your new folded origami boat on water and see it float for yourself.

How To: Tie the cleat knot easily

Check out this instructional knot tying video that demonstrates how to tie a cleat knot. Learn how to tie off your boat at the dock. Just follow the simple instructions outlined in this boating tutorial and learn how to tie a Cleat Knot. Knot tying is a breeze with this video. Start practicing and reel in the big fish!

How To: Make a canopy for your boat

You can make your own canopy for your boat and save hundreds of dollars from the store bought ones. You’ll need 1 inch pvc pipe, some nuts and bolts and you‘re set. You’ll set you’re canopy off of some swivel brackets that secure on the pvc pipe with 2 inch screws. This video will show you how to rig everything and you’ll be sitting in the shade in no time.

How To: Tie a Bowline Knot for boaters

The boaters at BoatUS know that the bowline knot can be one of the hardest knots for new boat owners to learn. In this instructional knot tying video, Matt and Ann demonstrate how to tie a bowline and talk about its common uses. Know your knots and learn how to tie a bowline knot with this boating tutorial video.

How To: Tie a clove hitch

What happens when you arrive at a dock and can't find a cleat to tie your boat onto? Matt and Ann of BoatUS demonstrate how to tie your boat to a piling using a clove hitch. Know your knots by learning how to tie a clove hitch with this instructional knot tying video.

How To: Winterize your boat

In this tutorial, we learn how to winterize your boat with Bill Sisson. First, you need to make sure everything that moves stays moving. You can help this by adding some oil and cream to the parts that need to stay moving. Anything that is related to the fuel system should be treated as well. The fuel system needs to be treated or else it won't work properly when you start your boat up again in the summer. Make sure you have a good fuel stabilizer in the fuel and treat the filter as well. Jus...

How To: Get in a rowing boat

Check out this instructional rowing video that demonstrates how to get into a rowing boat.Rowing begins with stepping into the boat. Every boat is adjustable so different size people can row the same equipment. Learn facts and skills for competitive rowing in this rowing video.

How To: Winterize the sterdrive unit on your boat

In this tutorial, we learn how to winterize the stern drive unit on your boat. By draining the oil as the last step, you must inspect for moisture. If you have no moisture, you can assume there is no water intrusion so you don't have to do any repairs. Remove the oil out of the lower unit first, making sure to keep an eye out for metal shavings and moisture. Use the proper gear lube to make sure you are draining all the areas properly. When finished, your boat will be ready to be stored and b...

How To: Install a t-top navigational light on your boat

Navigational lights on a boat can be extremely important. They not only can be used in cases of emergency, but also let other boaters know that you're there and to either keep away or watch out. It can be a little bit difficult to install, but after watching this tutorial may seem simple. So find out how to install a navigational light on your t-top tower on your boat. Enjoy!

How To: Easily install a CE Smith t-top storage bag on a boat

Nothing is more frustrating that finding yourself out on the open sea and having to manuever around a bunch of stuff lying around in your boat. Not only can it be hazerdous, but also very annoying. So what do you do? Install a storage bag or course! In this tutorial, you;ll find out how to easily install a CE Smith t-top storage bag on your boat in little to no time. Now all your stuff can be easily put away and easily accessible. Enjoy!

How To: Install a CE Smith t-top electronics box on your boat

When out on the ocean, it's always a smart move to make sure your electronics are close by and easily accessible. The best way to do so is by having it located at the t-top tower of your boat. So this tutorial will show you how to install a CE Smith electronics box on the t-top of your boat. It's easy to do and will have your equipment ready in no time. Enjoy!

How To: Fold an origami catamaran boat

Not only is origami useful for making things that appear like they should be able to float (like paper swans), it's actually good for producing things that do — like paper boats. With this guide, you'll learn how to make a paper catamaran with origami, the traditional art of Japanese paper folding. For more information, including a step-by-step overview of the folding process, as well as to get started making your own floating paper boats, watch this free origami lesson.

Prev Page