Nice Glass Search Results

How To: Cut plate glass

This is a Fine Art video tutorial where you will learn how to cut plate glass. Measure the plate glass and make sure the measurements are correct. Then place the guide along the line of the cut, take your glass cutter and score along the edge of the guide. If the plate is small in size, take the base of the cutter and place it underneath the score mark and apply equal pressure with your hands on both sides of the score. The plate will snap with a nice clean cut. Another way to snap the glass ...

How To: Make a glass out of a beer bottle

This video tutorial shows how to make a cool beer glass out of a beer bottle. This is also a great trick for cutting the bottle; forget the glass cutter or tricks with string and acetone. Just pour oil up to the level where you want the bottle cut off and place a red-hot piece of metal into it. Because of the great heat conductivity of oil and at the poor heat conductivity of glass, it will expand at the edge of the oil surface, cracking in a nice even line. Watch this instructional video and...

How To: Heat up & serve warm brandy

In this video from ExtremeBartending, you can learn how to heat up and serve warm brandy, a classic drink, which is particularly nice to sip on a cold night. The video offers three separate ways to achieve your warm brandy, using hot water in a brandy snifter to warm the glass, and then pouring in the brandy, putting hot water in a separate glass, and then resting your brandy snifter on that, or finally, a bold method that actually involves setting the brandy on fire!

How To: Blow glass

Jim McKelvey is going to show you how to blow glass. One of the secrets to making really nice glass is making really even gathers. So, if you're a beginning student, there are some tricks that you can use to learn how to gather correctly. That's just part of what will be covered on this series about beginning glass blowing.

How To: Make a glass flower

Watch to learn how to use fire to make a flower out of glass. Manipulating glass like this takes a lot of patience and requires separating and joining the glass together until it forms into the shape you want. Make sure to wear gloves and goggles!

How To: Install a glass tile backspash

This video is to show how to install a glass tile backsplash. Because installing glass is a little different then installing ceramic, knowing what to do is important. Use painter's tape to protect your surroundings wherever you are installing your glass and use only a white thin set mortar recommended from the glass manufacturer to adhere your tiles. Since the glass is see through, unlike ceramic tiles, you need to make sure there is no discoloration and smooth out the ridges on the mortar fo...

How To: Paint Around Glass

It's always difficult to paint neatly but it is especially difficult to keep the paint off of glass. Removing paint from glass windows and cabinetry can be a real pain. With this tutorial you will learn how to paint around glass. Keep your paint job nice and neat with this how to video.

How To: Make a Mexican martini

To make a perfect martini start by icing up a metal shaker. Then start adding the ingredients beginning with 2 ounces of premium tequila, 1 ounce of Cointreau liqueur, 1/4 ounce of Roses Lime Juice, and 1/2 teaspoon of granulated sugar. Put the lid on the shaker and shake the drink up. Moisten the rim of the martini glass with a lime, and then dip the glass in salt to coat the rim of the glass with salt. Pour the mix into the glass, and then put a slice of lime on the rim of the glass, and yo...

How To: Cut flat laminated glass

In this video tutorial, viewers learn how to cut laminated glass. Laminated glass is a safety glass that has two pieces of glass with a plastic foam in between. The materials required to cut laminated glass are: an oil glass cutter, L-square, razor blade and an optional propane torch. Begin by marking the glass to your preferred measurement. Then use the L-square to line up the marking. Then use the oil glass cutter to cut down the marked line. Flip it over do the same on the other side. Then...

How To: Make a cold Japanese saké Tokyo Rose cocktail

The Tokyo Rose cocktail is made with sake, which is usually served hot, but the video shows us how to make a cold cocktail with sake. Start by chilling the cocktail glass and the shaker so they are both nice and cold. In the shaker put an ounce of sake, an ounce of vodka and an ounce of melon liqueur. Give it a good shake and strain it into the cold cocktail glass. The end result is a good looking and delicious Tokyo Rose.

How To: Make the Dali wine glass out of blown glass

Dean Smiley and Eliska Harmer, master glass blowers from New York show how to make one of their designs, the Dali glass. Follow along as the glass is blown and shaped, transforming from a molten blob into a beautiful glass. This video glass-blowing tutorial is an inspirational peek at an unusual form of art.

How To: Etch glass

Glass Etching is stunning. Discover how easy etching glass is in this video with host Meghan Carter, where you'll find step-by-step instructions on how to etch glass. These instructions work with both glass etching stencils and homemade glass etching patterns. You'll be amazed by how quickly you can produce beautiful results with glass etching.

How To: Make your own glass art

Watch this glass tutorial video to learn about the extreme hobby of glass blowing and how to make your own glass art. This hobby is extreme because of the high temperatures and tools used, so be very careful. You'll be blowing your own glass art in no time after watching this helpful how-to video.

How To: Use a glass cutter & runner

This is a great simple video, which will show you how to properly use a glass cutter and runner. The very first step is how to hold the glass cutter, you want to hold it at a 45 degree angle straight on the glass. Make sure to try your best to avoid leaning it to the left or right and at a 90 degree angle, and also make sure to start off the glass before cutting. Depending on your preference you can either push or pull the cutter, it doesn't matter which way. Once you make the cut, take the r...

How To: Cut glass with a pair of scissors

This video describes the process of cutting glass with a regular pair of scissors. Objects required include a pair of scissors, glass to cut, gloves, a tub, and water. First, fill the tub with water to a proper depth to allow for submersion of the glass. Once the tub is filled, submerge the glass and once the glass is submerged, while holding it, begin to slowly cut the glass with careful and slow cuts from the scissors. It is suggested to not conduct the procedure with haste, take the proces...

How To: Make encased stringers on glass beads

Here is a quick video on how to make encased stringers for glass beads. This is a great way to add fancy stringer decoration to your glass beads. These lampworking instructions demonstrate how to add thin ropes of color and pattern embedded in the molten glass bead. Use this technique to make finely crafted glass jewelry such as beads for necklaces, bracelets and earrings.

How To: Make mosaic glass art

Glass mosaics create beautiful decorative art pieces and are great for interior design and sprucing up a wall, walkway or even a piece of furniture in your house. Learn how to make a glass kitchen backsplash mosaic in this free art project video series.

Prev Page