Measures Search Results

Botnets and RATs : Precautionary Measures and Detection (Part 2)

Hola my fellow hackers! I promised you the tutorials on setting up RAT's and Botnets, but before jumping into those, i want you to know about the precautionary measures and detection of RATs which might be on the system without your prior knowledge. Of course the Anti-virus do most of the job but there are some RATs which slips past the Anti-viruses (This is where Hacker's skill come into play).

How To: Measure your body fat

One of the easiest ways to measure body fat is by using hydrostatic weighing. It is based on Archimedes' principle, the law of buoyancy. It works by calculating body fat from measuring the amount of displaced water after a person has been immersed under water. Since muscle is denser than body fat, a person who has more muscle will displace less water than a person of the same weight with more body fat. This test is usually performed for a couple times for averaging accuracy. If the test is do...

How To: Read a Tape Measure

If you don't work in construction or are a woodworking master, you probably aren't entirely sure what all those marks are on a tape measure. Sure, you likely know the basics, like there are 12 inches to a foot, but what are all those little tick marks for? Don't let all those little lines dissuade you from using a tape measure. Follow these guidelines to help you read all those little ruler marks.

How To: Build a Cheap Arduino Tachometer to Measure the RPMs of Spinning Fans (And More)

A tachometer, or RPM counter, is a device that measures the speed of something that's rotating. In a car with a manual transmission, the tachometer can be helpful in determining when to release the clutch and how much gas to give when you're taking off. This DIY Arduino Tachometer by Chris on PyroElectro uses an infrared transmitter and receiver break-beam pair to measure the RPM of a computer fan. When the fan blade passes between the transmitter and receiver, the IR beam counts the interrup...

How To: Measure the speed of light in chocolate

This tray of chocolate has been cooked in the microwave. Robert Kramf measures the distance between the hot spots that appeared on the surface of the chocolate to find the half distance between the wavelengths the microwave emits. This can be extrapolated by millions to find an estimated speed of light using only chocolate. Measure the speed of light in chocolate.

How To: Measure Radiation in Japan, Plus Other Sources of Common, Everyday Intake

In the wake of the recent tragedy in Japan, Southern Californians have been hyper alert to any news regarding dangerous levels of nuclear radiation drifting over from Fukushima. At this time, official statements from the California Department of Public Health and the EPA are assuaging the population that there is nothing to fear. While there has been some detection of radiation in the air, the current levels recorded are "thousands of times below any conservative level of concern". But despit...

How To: Solve outdoor lighting problems

Installing security lights outside of your home can make for a great addition, but they also create new problems with regards to maintenance and cleaning. Having lights outside exposes them to all of the elements that mother nature can throw at them. This video will show not only how to install security lights, it will also show the proper measures to take so they will keep working with minimal maintenance and care.

How To: Use a metrenome to improve your internal clock with Pathik Desai

Even though this video is for guitar, learning how to improve your internal clock to feel tempos and measures is important for ALL instruments. If you can't sync up with a metrenome you can't sync up with the drums, and quite frankly no one will want to play with you at that point. But don't worry, if you're having trouble with your timing and are looking for a way to help improve your internal clock, Pathik Desai from Musician's Institute, has a great lesson in store for you! You'll learn so...

How To: Play the 12 bar blues on the piano in both major and minor tonalities

The 12 bar Blues is something that EVERY musician should know how to play. It may be "simple music" but as they say, "simple music is the hardest kind of music to play". Understanding the theory behind the 12 bar Blues is crucial to feeling measures and also gives you a chance to really make a very simple three chord phrase your own. In this video you will learn how to understand, play and feel the 12 bar Blues in it's various forms including the major, minor and dominant Blues.

How To: Burn money without damaging it

Evil Dylan takes a twenty dollar bill and sets it on fire, but does not damage the money at all. Materials necessary for this experiment are distilled water, alcohol and a twenty dollar bill. He measures 45ml of distilled water into a measuring cup and then tops it off at 100ml with the alcohol. He then puts the twenty dollar bill into the mixture and soaks it for a while making sure that the bill is totally immersed. Then he sets it on fire and even though the fire burns, the bill is not dam...

How To: Remedy potential earthquake hazards in the workplace

Washington State has a history of large earthquakes, as does California. More than 1,000 earthquakes are registered in Washington State each year. More than 10,000 are recorded in California each year. In an earthquake, non-structural elements, which is anything that does not actually hold the building up, may become unhooked, dislodged, thrown about, and tipped over. this can cause extensive damage, interruption of operation, injury and even death.

How To: Make a Mickey Mouse tie dye t-shirt

Making a Mickey Mouse tie-dye shirt is as easy as can be. First trace a Mickey mouse outline onto a plain white shirt with a pencil. Using plain dental floss and a needle, sew around the tracing you've just created. For optimal results soak the shirt in soda ash (this step is optional). On the final stitch, pull on the dental floss until Mickey's head "pops up". You will need several rubber bands for the next few steps. First tightly wrap some rubber bands around Mickey's head. Add additional...

How To: Play "Losing My Religion" by R.E.M. on guitar

In this video, we learn how to play "Losing My Religion" by R.E.M. on guitar. This song will be done in the open position. Start out with the intro, which will have the chords: F, A minor, G, D minor, D, E minor, and C. This song does not have any split measures, so every chord should get one to two measures as you play. Play this slowly, then when you have it repeat this four times and change up on the fifth time. Once you are finished, you can breeze through the song and simply learn the ch...

How To: Sew a zipper front dress inspired by Max Azria

First of all you need some basic tools like sewing machine, scissors, pins, ruler, measuring tape and thread. You also need a printed knit of size 1.5 yard or 1.4 meters ad a separating zipper of size 18 inches or 46 cm. First you have to start by making the straps and bodice. Cut off two rectangles those measures from the top of your bust to the bottom of your bust. The length should be enough to go all the way around your upper half. Place these two rectangle pieces together. Now separate y...

How To: Make a living will

Just saying that you don’t want extraordinary measures taken if you become incapacitated does not cut it; you need to spell out your wishes in a living will. Watch this video to learn how to make one.

How To: Build a Morse code telegraph

Keeping secrets out of the wrong hands warrants desperate measures—or maybe just sensical. If you have a secret, the best way to protect it is with a code—and the best way to transfer that secret message is via an electronic telegraph system. This video will show you how to make your own homemade electronic telegraph machine, so that you can send those encrypted Morse code messages to your friends without fear of prosecution.

How To: Play basic Blues on the acoustic guitar

The blues is where it all began. Before you learn how to play rock or jazz or metal, you should start with the blues. Learning the basic 12 bar form can help you feel out measures and develop your sense of direction in music, and learning how to play the shuffled rhythm will help to increase your proficiency with learning other rhythm patterns. In this fantastic video you will get a basic over view of the Blues on the acoustic guitar and a quick variation on the standard blues shuffle.

How To: Care for house plants growing in water

Growing plants in the Southwest is different then other climates. We learn how to grow plants in water. Salt is a factor that we need to be cautious of. Salt is in soil and in water. Water, once absorbed leaves a layer of salt. It can be avoided by watering in a certain way. Changing the water frequently, a dish underneath a potted plant to drain the water and flushing out the salt and re-potting periodically. Sometimes extremes measures must be taken to hydrate a plant. In this case putting ...

How To: Play "Love Story" by Taylor Swift on acoustic guitar

This is an instructional video that shows you how to play "Love Story" by Taylor Swift on an acoustic guitar. Youngster age goes through step by step for each chord played in what order. He lets you know that you might need a capo to bring the guitar up to a key two frets up. He explains how he plays certain chords with different fingerings than most common, how many measures to play a chord, and how long you should hold the different notes which he refers to quarter notes as diamonds. At the...

How To: Install snap tile for your bathroom floor

This is a video which shows how to install snap tile on a bathroom floor. The snam tile has plastic tabs that interlock. First he measures the lengths. Then he takes the tiles outside to be able to use the saw to cut lengths. Next a mark is drawn. The square is used to make straight lines. Make sure to measure twice and cut once. Use the guard on the wet saw so that water doesn't splash. Use the saw gently so as not to damage the tile. After the floor has been snapped into place, the grout is...

How To: Wipe your hard drive completely clean

Systm is the Do It Yourself show designed for the common geek who wants to quickly and easily learn how to dive into the latest and hottest tech projects. We will help you avoid pitfalls and get your project up and running fast. Search Systm on WonderHowTo for more DIY episodes from this Revision3 show.

How To: Perform emergency CPR and first aid on a pet dog

Dogs can choke or find themselves in emergency situations and require urgent medical assistance. While a veterinary aid is still mandatory, these CPR and first aid measures can be life-saving in a crucial moment. Watch this video tutorial and learn how to save a pet dog's, or cat's, life by CPR and first aid medical techniques.

Prev Page