How To: Remove a turkey tail fan
In this tutorial, we learn how to remove a turkey tail fan. Get the tail fan and spread it out, then hold the secondary tail fans and cut the tail fans out. You will want to cut at the base of the turkey where the but is, skinning a little bit to get it out. The removal should be pretty quick and simple. Before you do this, you should prepare the turkey by hanging it upside down on a tree. Keep the tail fan in borax powder until you're able to properly store it to make a trophy out of it. Thi...
News: Falcon Annihilates Fox and Deer
From Wikipedia, "Falconry is is a sport which involves the use of trained raptors (birds of prey) to hunt or pursue game for humans."
How To: Make a cheap but realistic goose call
In this video tutorial, viewers learn how to make a realistic goose call. The materials required for this project are: a plastic bottle cap, scissors, rubber band and a piece of paper. Begin by making a small hole in the bottle cap. Then wrap the paper around the other side of the bottle cap and secure it with the rubber band. Now just blow in the hole and make a humming sound to create a goose call. This video will benefit those viewers who enjoy goose hunting, and would like to learn how to...
How To: Tie a noose loop knot for trapping animals
This simple noose can be done quickly and is ideal for trapping small game. This video serves as a step by step detailed guide on how to tie it. Shown in two ways, a simple one and a more involved way that makes the rope and noose move more easily. Watch this video hunting tutorial and learn how to tie a looped knot noose for trapping animals and game.
How To: Skin a rabbit
Have you ever wanted to cut a rabbit's foot off? Then check out this how-to video for skinning rabbits, you meanie.
How To: Pluck a woodcock
Shooting Times cookery writer, Mark Hinge, shows how to pluck a Woodcock.
How To: Properly cape a pronghorn antelope or similar for mounting and taxidermy
While a pronghorn antelope is used in this video, the techniques and methods will also work for any deer, elk, caribou or other hunting animal you've bagged. Learn how to properly skin and remove the head for later taxidermy and mounting.
News: Real Life, Cold-Blooded Cuckoo Clock
German artist Michael Sans Berlin taxidermied a somewhat sadistic homage to one of his nation's most traditional craft objects, the cuckoo clock (the first version was made in southwest Germany's Black Forest between 1740 and 1750).
How To: Make a box trap for live pheasants
Check out this how-to video to make non typical box traps and to catch wild ring necked pheasants (hens).
How To: Prepare a deer skull for mounting in the European style
You just shot a beautiful buck and you'd like to add his skull to your wall of trophies. If you're looking to mount the deer skull in the European style, take a look at this walkthrough and learn how to prepare the skull through boiling, degreasing, and bleaching.
How To: Cut Deer Antlers, Clean Bear Skulls & Cape Elk Skins: The Art of Taxidermy
There's three types of animal lovers in the world. The first are your basic pet owners. The ones with a
How To: Choose a good deer ambush spot & light a survival fire with steel
This survival video offers up two pieces of useful information: how to scout and choose a good location to hunt deer and how to use the Kodiak fire steel tool to light a fire. These two pieces go hand in hand when you're out in the wild looking for food and needing a way to cook it.
How To: Make sure your game is really dead
In this tutorial, we learn how to make sure your game is really dead. One of the best things is to stay away from the feet, then touch the eyes with the end of your rifle. If there is no reaction at all, then the animal is dead for sure. After this, you will need to attach a validated elk tag to the animal, making sure it's secured. Glue it to the ear using your hands and pressing it down for several seconds. In different states, there are rules and regulations as to where you have to apply t...
How To: Field dress a deer
In this tutorial we learn how to field dress a deer. First, put some gloves on and grab a sharp knife. After this, puncture a hole in the lower half of the throat of the deer. Next, start to cut up until you reach the neck. There will be a lot of blood that comes out, just a warning. Then, you will see the inside of the deer start to come out from the fur. Cut the piece of the neck and then tie together at the end. To finish, go to the rear end of the deer and cut from the hole. Tie it with a...
How To: Score a big buck or elk
In this tutorial, we learn how to score a big buck or elk with Stan Potts. First, take the bottom of it and remove a bottom line from the main beam. Measure the length of all of the sides. If you're going to cut it out, you should be perfectly even with the top. Then, you will do this on the other side for a typical frame. From here, take the greatest inside spread at a perpendicular angle and that will be your spread credit. Add up each side individually and then you will find the difference...
How To: Skin a deer with a golf ball
In this tutorial, we learn how to skin a deer with a golf ball. First, hang it up by a tree around its neck. From here, taper down from the shoulders until you reach the bottom. Then, cut each of the ankles right around the knuckle and slice it down the front like normal. From here you will take a golf ball and stick it in the hide. Hold the hide over the golf ball and then make a ball with it. Then, take a slip knot and wrap it around the golf ball, tightening it up tight. From here, you wil...
How To: SKin a deer the easy way
In this video we learn how to skin a deer the easy way. First, you will lay the deer down on its back and remove the fur from the stomach area. By this time, the legs and arms of the deer should be cut off. Next, you will use your knife to cut all the way to the throat and around the neck area. From here, you will pull the fur back from the deer all the way around. Once you get to the back, you will need to turn the deer around to get the rest of the fur from the back.
How To: Skin a deer hide
In this tutorial, we learn how to skin a deer hide. First, cut into the joint on the back legs. Cut across this, then down through the back side of the leg. Open the leg up with the knife and continue to cut until you see the last joint. After this, you can snap the leg and then repeat this same process for all of the legs. Now, apply pressure to the neck where you want to cut and then skin the stomach area from the inside area. Keep the tip of the knife away from the hide so you don't poke a...
How To: Sabotage a cruel and unnecessary fox hunt
Fox hunting has become illegal is some parts of the world, but there are still places where fox hunting is an acceptable activity, where people ride on horseback, following foxhounds and other scent dogs on their hunt for foxes, most likely a red foxes.
How To: Hunt the elusive hairy and yeti-like beast called Sasquatch (or Bigfoot)
Much like UFOs and chupacabras, the Sasquatch has yet to officially take its name out of the fictional section, but that doesn't mean Bigfoot won't transform from fiction to reality someday. In fact, with the hunting and tracking skills outlined in this video, you may just be the one who slams the yeti-like Sasquatch into the science books. Learn to track the elusive Bigfoot creature like an expert!
How To: Use arapuca in a bird trap
In this video, we learn how to use arapuca in a bird trap. First, place the arapuca underneath the trap, then place two bricks on both sides, along with a stick to prop up the trap. Now, leave this around until you catch a bird. When you finally catch the bird, stick your hands through the top of the trap and get your hands around the bird. After this, lift the trap up and let the bird go. Make sure the goat doesn't see you set the trap, or else they will eat the arapuca that you have laid ou...
News: Taxidermic Nightlights Teach Children to Take Comfort in the Dark
Want to help a younger sibling get over his or her fear of the dark? Get them a horrifying taxidermic nightlight!
How To: Clean a coyote
In this tutorial, we learn how to clean a coyote. Start out by cutting the legs and up to the inside of the rear end. Cut the skin around the feet and then peel the fur and skin upwards. Trim into the butt of the coyote, then cut around the tail into the middle. Keep pulling the skin up around the legs of the animal and around the thighs, using a sharp knife to loosen the skin. Remove the skin completely from around the legs, then cut the tail so only the bone is left and the skin is off. Aft...
How To: Clean or field dress a deer
In this video, you'll learn how to field dress a deer. Put on gloves. Use Ozark trail hunting knife for dressing the deer. Place deer on its back, head facing away from you. Starting from the anus, split the deer up the middle to the chest. Use left had to prevent cutting or nicking the internal organs. Stretch the cavity open. Loosen organs from cavity wall. Cut out the entrails and all organs. Make an anal incision. Use the butt tool to remove the butt/final portion of intestine. Saw the pe...
How To: Clean a dead goose, duck, or pheasant
To clean fowl (ducks, geese, pheasant, etc) in the field, begin by turning it on its back. Lay it down on a flat surface. Grab a handful of flesh, underneath the head and neck and rip it away. Continue ripping the skin and feathers off around the torso. You will need to retain one wing for identification. Cut one wing off with clippers.
How To: Use food plots when hunting
If you're wondering about food plots and why they are important when hunting, check out the tutorial above. In the video, Dr. Grant Woods, a wildlife biologist, talks about the importance of food plots and how they can be used to help maximize your hunting capabilities. These food plots are perfect areas for deer to rest near and spend their time around. So sit back, pay attention, and enjoy!
How To: Use small food plots when hunting
Something to look out for when hunting, is small food plots that are surrounded by trees and offer a good area for things to be grown. These areas are perfect for growing certain plants that would attract deers for months and months. In this video tutorial, you'll be finding out how to use these small food plots when you're out hunting. It's easy to follow and will make life easier for you. Good luck and enjoy!
How To: Make a bench shooting bag
In this Outdoor Recreation video tutorial Dave from 'journey the outdoors' explains how to make a bench shooting bag. This is used by bench or week-end shooters for recreation purposes. For this you will need an old sock. Take one that you don't use anymore and preferably a tight knit sock. Then fill it with rice and tie the open end of the sock. You can also fill it with beans or some other such substance. Rice and beans being bigger than sand, there will be more air in the bag and it will a...
How To: Build a rabbit box
Leaving rabbits outside can be a great way for them to be exposed to the outdoors and recieve the excercise they may need. But it can be dangerous, especially if there are wild animals around the area. In this ttutorial you'll find out how to build a rabbit box using some easy to get material. Good luck and enjoy!
How To: Wax a hunting trap
In this video, Jason "Bellyeyes" Hanson shows you how to wax your hunting traps. This is a pretty easy process and Jason will teach you all the steps you need to know in just a few minutes. So, if you are a hunter, check out this tutorial and get started maintaining your traps. Wax a hunting trap.
How To: Fletch an arrow and apply an arrow wrap
In this video, Jason "Bellyeyes" Hanson gives you detailed instructions on how to apply an arrow wrap or fletching to an arrow. This tutorial will shwo you how to maintain your arrows, step by step to make sure they are effective. Happy hunting! Fletch an arrow and apply an arrow wrap.
How To: Flesh a raccoon
If you are a hunter, you will eventually need to know how to flesh a raccoon. These cute and fluffy animals aren't typically the ones you would imagine skinning, but if they've gotten into your garbage cans one too many times, who knows? Follow along with this video and learn how to get the skin clean off these backyard dwellers. Flesh a raccoon.
How To: Skin a deer for the best condition for brain tanning
This 3-part video tutorial series will show you a very thorough way to skin a deer. This method of skinning of deer will provide the best shape and condition for your next step - brain tanning. Follow along with each step of the way, and make sure you're using an ultra sharp knife to eliminate the dangers of accidentally cutting yourself.
HowTo: Capture a Cockerfly
Cock-er-fly. Noun (pl. -flies)
How To: Use the "fawns feeding bleat" call in deer hunting
In this how to video, you will learn how to use the fawn feeding bleat. This is very effective for bow hunters. The call is easy to use. The key is when you make the sound, make it low and desperate. The fawn is hungry and calling to a doe to be fed. Make sure there is a sense of concern to it. Cuff it to create resonance when you make the call. You can make two or three of these calls. Hesitate for ten to fifteen minutes before making the call again. A doe should respond to feed the fawn. A ...
How To: Use the "adult blatt" deer call for hunting
In this how-to video, you will learn how to do the adult Blatt call. This call is made by an adult deer about 18 months old. There are many types of Blatt calls. The Estrus Blatt is the most effective in getting a Buck to respond. The key is to keep the call short. This call will be made by a Doe when in peak heat and looking for attention from a Buck. Turn the calling device quickly. This will be done several times in a row. Do not make a loud alarm Blatt. Keep it short. This video gives you...
How To: Bait and catch a squirrel
You can find a humane squirrel and rodent trap at most all-purpose stores, this video recommends Home Depot and will cost about thirty-five dollars. To bait it you will need some peanut butter and crackers. Take out four crackers and break them in half. Spread some peanut butter on one side of each piece. In the middle of the trap there is a trigger that is raised when active. Place two pieces of the cracker behind the trigger deep in the cage. Next place two pieces upside down on the trigger...
How To: Hunt deer from a treestand
If you like to hunt deer then knowing how to effectively hunt from a tree stand is a useful skill to have. This video will show you how to set up and wait in a tree stand which is basically a platform set up in a tree in order to hunt a deer without detection. You can use wind checker and know the habits of the deer and the area to know where they should be coming from. The deer in this video might not be real but the tips are. The kill method is with a bow and arrow and practicing your shoot...
How To: Rattle and grunt whitetail bucks when hunting dear
In this how-to video, you will learn how to make a rattling and grunt call for Whitetail bucks. You can use a Mad Buck call, as it sounds really good. When you are grunting, make sure it sounds natural. Use short grunts. Put your hand over the end and let go as you make the call. This will allow you to make a good, solid grunt. A tending grunt can also be used during certain times. This consists of short little grunts. Grunt about thirty seconds before you start rattling. You should rattle on...
How To: Do a tending grunt sequence when dear hunting
Peter Fiduccia from Field and Stream explains how to use the tending grunt sequence when hunting deer. The tending grunt is a grunt made by a buck when following a doe. The grunt is made in order to let the doe know that he wants to breed. The key to making the call is to be soft. Bucks don't make this call with aggression or loudly. The first step is to take the call and cup your hand around the end. Blow gently into the call. For more resonance in the call, grab the call with both hands at ...
Next Page
Prev Page