Learn how to tie a knot, but not just any old knot... a transom knot. You'll never have any troubles again tying transom knots, thanks to this Marinenews animated tutorial. You can learn by simply watching the knot tying animation at a moderate speed, or if need be, click on "learn by steps" to get step-by-step rope knot instructions for transom knots.
The Transom knot provides a binding quite similar to the constrictor knot. It is most commonly used to secure two linear objects that are at right angles to one another. Common examples where the transom knot would be utilised are in securing garden stakes and trellises. A secondary transom knot can be tied at right angles to the first to reinforce the binding. The ends of the transom knot can be trimmed to provide a neat finish.
There are basic rules that apply to the tying of all knots in nylon monofilament, copolymer and cofilament lines. These rules apply in differing degrees to most of the knots, splices and hitches formed in multi-strand materials, such as Dacron, Micron, braided nylon and wire or cable leaders.
RULE 1: Be thoroughly familiar with all the knots you tie and continually practice the tying of those knots.
RULE 2: Always lubricate knots before tightening them, either with saliva, water or another similar lubricant. Knots tied in nylon monofilament, copolymer and cofilament lines are highly susceptible to heat friction.
RULE 3: When tightening the knot, do so gently but firmly. Do not draw the knot quickly as this can generate heat damaging the line. Give a few test pulls on the newly tied knot.
RULE 4: If you are not happy with a knot, always re-tie it until you are satisfied. Remember that a knot is effectively the weakest link between you and the fish.
Hosted by marinews.com
Creator's Site: www.marinews.com
Curated By: rmansur
