How to install a sink

Tim Carter shows you how to install the sink with these easy to follow tips. Watch this video for best results.Position the new sink upside down on the countertop and accurately trace the outline of the sink. This provides a guideline for the real mark for the cut-out. The cutout will normally be about 3/16" inside the original mark. This allows for the lip of the sink to overhang the counter top. Check the sink installation directions for the proper measurement. Don't make square corners when cutting out the hole. The corners should have a radius of about 1-1/2". Grab a can out of the pantry to draw your curve.

To make the cut out, two power tools will be needed. A regular drill to drill a starter hole in the counter and a spiral saw to cut the counter top. Drill the starter hole and cut out half of the sink opening with the spiral saw. Screw a board across the opening to hold the cut out piece of counter top from falling down into the cabinet. This board can also be used to lift the piece out of the counter.