How to hack a PSP using ChickHEN R2 without Pandora

This video shows you how to hack your PSP using ChickHEN R2. You will need at least a 90% battery to do this hack. A pandora battery is not needed for this hack. You will also need at least a 2g memory stick. So you use this tutorial at your own risk!!!

This tutorial will show you how to install 5.00 m33-4.
The files used in this video can be downloaded from this link

Written Instructions:
1. Put the files where they are supposed to go like so in the video
2. Update your psp to 5.03. You have to do this in order to enable ChickHen R2.
3. Then you want to enable ChickHen R2 and the first part to do this restore default settings and turn off UMD Cache and turn off UMD auto start and turn off usb auto connect.
4. Go to your photo settings and let the photos load. You will more than likely have to do this a lot. On a fat psp you can take out the battery and let it reboot then try again and it most off the time it works. On a slim click on the folder and then run all the way to the bottom picture and then it should work. When it gets done you will be running ChickHen R2.
5. Run pspident 0.4 and make sure that your psp motherboard type is lower then TA-088v3 or a psp 3000. If you have anything lower then you are good.
6. Run the Hell Cats Recovery Flasher.
7. When it is done you will have a hacked psp on 5.00m33-4