Crochet a Toy Hammock

This article was provided by wikiHow, a wiki building the world's largest, highest quality how-to manual. Please edit this article and find author credits at the original wikiHow article on how to crochet a toy hammock. Content on wikiHow can be shared under a Creative Commons License.

Grade C Views 490
Last edited 2 months ago

Do you or the special kids in your life have a favorite toy or doll who could use some time off its feet after a busy day of play? Is it time for a toy to "retire" after a lifetime of hard work? This hammock can be made to any size depending on the yarn and hook and how many stitches you make.

Step 1  

Choose yarn or string to make this project. It can be any color and any thickness you think will look good with your toy. You may find you prefer cotton yarn or string, so that it isn't too stretchy.

Step 2  

Tie a slip knot and chain 8.

 

Step 3  

Chain many more stitches, according to the length (head to toe) of the toy who will inhabit this hammock. Hammocks dangle down, so make the chain longer than the toy. This chain will form one side of the finished hammock. In this example, there are 108 chain stitches at this point.

 

Step 4  

Chain ten more stitches. There are now 118 stitches in the example.  

  • The first eight and the last ten stitches will form the loops at either end, which is why they're listed separately.

Step 5  

Work a slip stitch into the tenth chain from the hook.

 

Step 6  

Chain five.

 

Step 7  

Count five stitches from the last slip stitch and work a slip stitch into it.

 

Step 8  

Continue this pattern back along the row. Chain 5, slip stitch into every fifth stitch, until you have the original 8 stitches remaining.  

  • Don't worry if you don't find exactly eight stitches here. Just try to leave more than five and fewer than ten.
 

Step 9  

Chain three. Slip stitch to join in the first stitch of the original chain.

 

Step 10  

Turn the work. This will start the third row.

Step 11  

Chain five. Slip stitch into the third stitch from the chain of five that forms the loop you're over.

 

Step 12  

Repeat this pattern, chain five, slip stitch into the third chain all the way down the row. The last loop will be different.

 

Step 13  

Chain five and join with a slip stitch low on the last loop.

 

Step 14  

Turn. Chain eight and join in the third chain from the last slip stitch in the previous row.

 

Step 15  

Repeat row three as many times as necessary to produce the desired width. Chain eight and turn.

 

Step 16  

On the last row only, chain four between each slip stitch, joining as before.  

  • This matches the very first edge and makes the edge a bit straighter and tighter. 
 

Step 17  

At the end of the row, after joining the last chain of five, chain eight. Loop around and join to the corner of the fabric with a slip stitch. Tie off and sew in the ends. This produces a final loop for the corner.

 

Step 18  

Count the number of loops at the end of the fabric and, stretching the fabric about to the dimension you intend for the hammock, also measure the fabric. This will tell you how many holes you will drill in the dowel and how far apart to drill them. This hammock will have holes every half inch. The fabric is stretchy, so the interval between the holes can be approximate, but the number of holes must be correct.

 

Step 19  

Cut dowels to the length desired and drill the appropriate number of holes in a dowel, evenly spaced.  

  • This is a 7/16" dowel with 1/8" holes every 1/2", but use whatever size and spacing seems right for your fabric.
  • Drill the holes larger than you will need for just the yarn or string. It will make it much easier to assemble and hang the hammock.
 

Step 20  

Clean up the edges of the holes with a craft knife or small round file. Also do any sanding that the dowels or the corners require. Jagged edges on the dowels will catch on the string. If you wish to apply any sort of finish to the dowels, do that now, too, and give the finish ample time to soak in and dry before proceeding.

 

Step 21  

Run a string through each loop and double it. Leave the strings long so that you have leftover length.  

  • It will help to hold the opposite end firmly. Here, it's wrapped around the other dowel and weighed down with books and things.
 

Step 22  

Thread both ends of the string through the corresponding hole in the dowel. Repeat for each loop and each hole.

 

Step 23  

Bring all the strings from one end together. Center the bundle over the middle string if there are an odd number of loops or between the two middle strings if there are an even number of loops. Pull the strings gently so that they all have approximately even tension when the bundle is held in the middle.  

  • It's important to get everything centered and even here so that the finished hammock will balance.
  • When gathering the second end, measure the distance along the middle string from the edge of the fabric to where you are holding the bundle and tying it.
 

Step 24  

Twist the bundle of strings together and tie a knot.

 

Step 25  

Create a loop or tie. For the one shown here, divide the strings into three (or more) groups and braid them. Wrap the loose ends of the braid back around the base of the braid. Tie another knot. Trim the ends to an even length.

 

Step 26  

Secure the hammock to hooks or build a frame for it.

 

Tips

  • If in doubt, make the hammock a bit too large for the toy it will hold. This hammock behaves just like the real thing, which means that your doll or toy may have a tough time balancing if the hammock is too small. 
  • If you would rather not crochet, you could use any stretchy piece of fabric, such as a rectangle cut out of an old t-shirt and hemmed.
  • Add large wooden beads to the ends, if you have them, for an extra touch.

Warnings

  • Only give this hammock to a child who is old enough to understand that it will only support the weight of a toy, not a child. Better yet, use it to display a special toy who has "retired" already.
  • When drilling holes in dowels, clamp them securely and keep fingers, hair, and loose clothing clear, and wear safety glasses. Use a drill press if you have one.

Via wikihow

Pyro-Spirograph-Drawings

Rosemarie Fiore is badass. She makes art with pyrotechnics, amusement park rides, Atari, guns, and pinball machines. Though all of her work is cool, I have to say my favorite piece is Fiore's larger ...

Who Needs Jump Rope When You Have a Flexible Friend

Breakdancing. Acrobatics. Gymnastics. Human jump roping fits in all. And why not? It's frickin' awesome. (Image credit: Flickr user envycleopatra.)

Indian Spiderman Defies Gravity (and Death)

Real life spiderman, Jyothi Rai of India, spends his time entertaining tourists by scaling walls of the Chitradurga Fort. The daredevil works completely harness free. Inspired? WonderHowTo's Climbing ...

Creepy Crawler Ant Robot

Wow, this robot has incredible movement. "A-Pod is an ant inspired hexapod robot with a 2 DOF abdomen (tail), a 3 DOF head with large mandibles. 6 legs with 3 DOF each. Total 25 servos ...

Remote Control Your Lawn Mower

Time to make those lazy Sunday afternoons even lazier. Instructables member johndavid400 has posted a full HowTo on modding your lawn mower to operate via remote control. " ...How to make your ...

loading...