Glass Sink Search Results

How To: Install a glass vessel sink or countertop

This video tutorial shows you how to install a glass vessel sink or countertop. First you need to make sure that the glass vessel sink or countertop has all of the pieces needed and that none of the pieces are scratched or broken. You then need to place the mouthing ring on the countertop where the sink is going to go. Make sure that the rubber side is facing down. Then carefully set the sink on the mouthing ring. You must then take off the tail piece of the pop up drain. Take off the ridge a...

How To: Etch glass in 5 minutes

In this video tutorial, viewers learn how to etch glass in 5 minutes. The materials needed for his procedure are: contact paper, Armour Etch and a paintbrush, glass and a sink. Begin by cutting the contact paper face up on a circuit mat. Cut it on medium speed and pressure. Then put the contact paper on glass. Work carefully to prevent any wrinkles and bubbles in the design. Now put the etching cream on in a dabbing motion. The etching cream will not run into areas that are not stuck down. Fi...

How To: Cut a piece of glass with scissors

In this video, we learn how to cut a piece of glass with scissors, water, and a lighter. First, you will need to grab a lighter and place it under the piece of glass that you want to cut to heat it up. Next, you will place your piece of glass into a sink full of water and cut your desired piece. Make sure to cut carefully, as you can get hurt very easily when dealing with sharp edges of glass. Make sure you are keeping the piece of glass you are using completely submerged in the water, along ...

How To: Cut a bottle

In this tutorial, Tony Vo teaches us how to cut a bottle. You will need: a glass bottle, yarn, lighter, sink of cold water, and acetone or alcohol. First, take your glass bottle and tie a piece of yarn around the part you want to cut. Wrap the yarn two times around, then tie it tie it tightly. Now, take the acetone and drop it onto the yarn until the entire piece is saturated. Next, take your lighter and burn the yarn on the bottle. As soon as the flames die down, place the bottle into a sink...

How To: Make rock candy

You can learn how to make rock candy. The process is very simple. You only need water and sugar. You put the water to boil and then add a cup of sugar. You mix it up and then put it in the sink and poor it into a glass. Then a screw is inserted into the glass to get moisture into the solution. Take it out, leave it for 3 days, then after 3 days sink it again in the solution and then leave it to dry for 1 week.

How To: Escape a car accident if sinking in deep water

It can happen in an instant: Your car ends up in the water, and it’s sinking fast. Here’s how to get out if you are in an unfortunate accident. You will need self composure and a glass breaking tool. Hardware stores sell tools specifically designed to break car windows in an emergency. Just remember to stay calm! Learn how to escape a car sinking in deep water if you are in a car accident.

How To: Make a compass floating in a glass of water

Check out this instructional science video to learn how to make a compass floating in glass of water. You will need a sewing needle, a standard refrigerator magnet, and a piece of toilet paper. Nestle the needle into the toilet paper and place it into a glass of water. The toilet paper will absorb the water and inevitably sink, but the needle will become an instant compass pointing north and south without fail. Have fun with this science experiment with the kids by playing with the magnet.

How To: Make a glass flower

Watch to learn how to use fire to make a flower out of glass. Manipulating glass like this takes a lot of patience and requires separating and joining the glass together until it forms into the shape you want. Make sure to wear gloves and goggles!

How To: How the Headrest in Your Vehicle Can Potentially Save Your Life One Day

If you ever find yourself in a car that's submerged under water, your first instinct should be to try and open either the window or the door in the first few seconds of touching water. Unfortunately, if you wait any longer than that, the lopsided ambient water pressure subjected to the car will make it impossible to open the car door, and the now ubiquitous power windows will likely short out. Sure, you could wait until the pressure has equalized on both sides of the car, but this usually hap...

How To: Cut flat laminated glass

In this video tutorial, viewers learn how to cut laminated glass. Laminated glass is a safety glass that has two pieces of glass with a plastic foam in between. The materials required to cut laminated glass are: an oil glass cutter, L-square, razor blade and an optional propane torch. Begin by marking the glass to your preferred measurement. Then use the L-square to line up the marking. Then use the oil glass cutter to cut down the marked line. Flip it over do the same on the other side. Then...

How To: Make the Dali wine glass out of blown glass

Dean Smiley and Eliska Harmer, master glass blowers from New York show how to make one of their designs, the Dali glass. Follow along as the glass is blown and shaped, transforming from a molten blob into a beautiful glass. This video glass-blowing tutorial is an inspirational peek at an unusual form of art.

How To: Etch glass

Glass Etching is stunning. Discover how easy etching glass is in this video with host Meghan Carter, where you'll find step-by-step instructions on how to etch glass. These instructions work with both glass etching stencils and homemade glass etching patterns. You'll be amazed by how quickly you can produce beautiful results with glass etching.

How To: Make your own glass art

Watch this glass tutorial video to learn about the extreme hobby of glass blowing and how to make your own glass art. This hobby is extreme because of the high temperatures and tools used, so be very careful. You'll be blowing your own glass art in no time after watching this helpful how-to video.

How To: Use a glass cutter & runner

This is a great simple video, which will show you how to properly use a glass cutter and runner. The very first step is how to hold the glass cutter, you want to hold it at a 45 degree angle straight on the glass. Make sure to try your best to avoid leaning it to the left or right and at a 90 degree angle, and also make sure to start off the glass before cutting. Depending on your preference you can either push or pull the cutter, it doesn't matter which way. Once you make the cut, take the r...

How To: Cut glass with a pair of scissors

This video describes the process of cutting glass with a regular pair of scissors. Objects required include a pair of scissors, glass to cut, gloves, a tub, and water. First, fill the tub with water to a proper depth to allow for submersion of the glass. Once the tub is filled, submerge the glass and once the glass is submerged, while holding it, begin to slowly cut the glass with careful and slow cuts from the scissors. It is suggested to not conduct the procedure with haste, take the proces...

How To: Make encased stringers on glass beads

Here is a quick video on how to make encased stringers for glass beads. This is a great way to add fancy stringer decoration to your glass beads. These lampworking instructions demonstrate how to add thin ropes of color and pattern embedded in the molten glass bead. Use this technique to make finely crafted glass jewelry such as beads for necklaces, bracelets and earrings.

How To: Make mosaic glass art

Glass mosaics create beautiful decorative art pieces and are great for interior design and sprucing up a wall, walkway or even a piece of furniture in your house. Learn how to make a glass kitchen backsplash mosaic in this free art project video series.

Prev Page